[ovirt-users] Re: [oVirt 4.3.1 Test Day] cmdline HE Deployment

On Mon, Feb 25, 2019 at 2:35 PM Guillaume Pavese < guillaume.pavese(a)interactiv-group.com&gt; wrote: > I made sure of everything and even stopped firewalld but still can't > connect : > > [root@vs-inf-int-kvm-fr-301-210 ~]# cat > /var/run/libvirt/qemu/HostedEngineLocal.xml > <graphics type='vnc' port='*5900*' autoport='yes' > *listen='127.0.0.1*'> > <listen type='address' address='*127.0.0.1*' fromConfig='1' > autoGenerated='no'/> > > [root@vs-inf-int-kvm-fr-301-210 ~]# netstat -pan | grep 59 > tcp 0 0 127.0.0.1:5900 0.0.0.0:* > LISTEN 13376/qemu-kvm > I suggest to try ssh tunneling, run ssh -L 5900:vs-inf-int-kvm-fr-301-210.hostics.fr:5900 root(a)vs-inf-int-kvm-fr-301-210.hostics.fr and then remote-viewer vnc://localhost:5900 > > [root@vs-inf-int-kvm-fr-301-210 ~]# systemctl status firewalld.service > ● firewalld.service - firewalld - dynamic firewall daemon > Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; > vendor preset: enabled) > *Active: inactive (dead)* > *févr. 25 14:24:03 vs-inf-int-kvm-fr-301-210.hostics.fr > <http://vs-inf-int-kvm-fr-301-210.hostics.fr> systemd[1]: Stopped firewalld > - dynamic firewall daemon.* > > From my laptop : > [gpavese@sheepora-X230 ~]$ telnet vs-inf-int-kvm-fr-301-210.hostics.fr > *5900* > Trying 10.199.210.11... > [*nothing gets through...*] > ^C > > For making sure : > [gpavese@sheepora-X230 ~]$ telnet vs-inf-int-kvm-fr-301-210.hostics.fr > *9090* > Trying 10.199.210.11... > *Connected* to vs-inf-int-kvm-fr-301-210.hostics.fr. > Escape character is '^]'. > > > > > > Guillaume Pavese > Ingénieur Système et Réseau > Interactiv-Group > > > On Mon, Feb 25, 2019 at 10:24 PM Parth Dhanjal <dparth(a)redhat.com&gt; wrote: > >> Hey! >> >> You can check under /var/run/libvirt/qemu/HostedEngine.xml >> Search for 'vnc' >> From there you can look up the port on which the HE VM is available and >> connect to the same. >> >> >> On Mon, Feb 25, 2019 at 6:47 PM Guillaume Pavese < >> guillaume.pavese(a)interactiv-group.com&gt; wrote: >> >>> 1) I am running in a Nested env, but under libvirt/kvm on remote Centos >>> 7.4 Hosts >>> >>> Please advise how to connect with VNC to the local HE vm. I see it's >>> running, but this is on a remote host, not my local machine : >>> qemu 13376 100 3.7 17679424 845216 ? Sl 12:46 85:08 >>> /usr/libexec/qemu-kvm -name guest=HostedEngineLocal,debug-threads=on -S >>> -object >>> secret,id=masterKey0,format=raw,file=/var/lib/libvirt/qemu/domain-1-HostedEngineLocal/master-key.aes >>> -machine pc-i440fx-rhel7.6.0,accel=kvm,usb=off,dump-guest-core=off -cpu >>> Haswell-noTSX,+kvmclock -m 16384 -realtime mlock=off -smp >>> 4,sockets=4,cores=1,threads=1 -uuid 6fe7c1c3-ea93-4343-a385-0d9e14bb563a >>> -no-user-config -nodefaults -chardev >>> socket,id=charmonitor,fd=27,server,nowait -mon >>> chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown >>> -global PIIX4_PM.disable_s3=1 -global PIIX4_PM.disable_s4=1 -boot >>> menu=off,strict=on -device >>> virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive >>> file=/var/tmp/localvmgmyYik/images/15023c8a-e3a7-4851-a97d-3b90996b423b/07fdcff3-11ce-4f7c-af05-0a878593e78e,format=qcow2,if=none,id=drive-virtio-disk0 >>> -device >>> virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0,bootindex=1 >>> -drive >>> file=/var/tmp/localvmgmyYik/seed.iso,format=raw,if=none,id=drive-ide0-0-0,readonly=on >>> -device ide-cd,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -netdev >>> tap,fd=29,id=hostnet0,vhost=on,vhostfd=30 -device >>> virtio-net-pci,netdev=hostnet0,id=net0,mac=00:16:3e:3e:fe:28,bus=pci.0,addr=0x3 >>> -chardev pty,id=charserial0 -device >>> isa-serial,chardev=charserial0,id=serial0 -chardev >>> socket,id=charchannel0,fd=31,server,nowait -device >>> virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=org.qemu.guest_agent.0 >>> *-vnc 127.0.0.1:0 <http://127.0.0.1:0> -device VGA*,id=video0,vgamem_mb=16,bus=pci.0,addr=0x2 >>> -object rng-random,id=objrng0,filename=/dev/random -device >>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x6 -sandbox >>> on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny >>> -msg timestamp=on >>> >>> >>> 2) [root@vs-inf-int-kvm-fr-301-210 ~]# cat >>> /etc/libvirt/qemu/networks/default.xml >>> <!-- >>> WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE >>> OVERWRITTEN AND LOST. Changes to this xml configuration should be made >>> using: >>> virsh net-edit default >>> or other application using the libvirt API. >>> --> >>> >>> <network> >>> <name>default</name> >>> <uuid>ba7bbfc8-28b8-459e-a42d-c2d6218e2cb6</uuid> >>> <forward mode='nat'/> >>> <bridge name='virbr0' stp='on' delay='0'/> >>> <mac address='52:54:00:e5:fe:3b'/> >>> <ip address='192.168.122.1' netmask='255.255.255.0'> >>> <dhcp> >>> <range start='192.168.122.2' end='192.168.122.254'/> >>> </dhcp> >>> </ip> >>> </network> >>> You have new mail in /var/spool/mail/root >>> [root@vs-inf-int-kvm-fr-301-210 ~] >>> >>> >>> >>> Guillaume Pavese >>> Ingénieur Système et Réseau >>> Interactiv-Group >>> >>> >>> On Mon, Feb 25, 2019 at 9:57 PM Simone Tiraboschi <stirabos(a)redhat.com&gt; >>> wrote: >>> >>>> >>>> >>>> On Mon, Feb 25, 2019 at 1:14 PM Guillaume Pavese < >>>> guillaume.pavese(a)interactiv-group.com&gt; wrote: >>>> >>>>> He deployment with "hosted-engine --deploy" fails at TASK >>>>> [ovirt.hosted_engine_setup : Get local VM IP] >>>>> >>>>> See following Error : >>>>> >>>>> 2019-02-25 12:46:50,154+0100 INFO >>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>> ansible_utils._process_output:109 TASK [ovirt.hosted_engine_setup : Get >>>>> local VM IP] >>>>> 2019-02-25 12:55:26,823+0100 DEBUG >>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>> ansible_utils._process_output:103 {u'_ansible_parsed': True, >>>>> u'stderr_lines': [], u'cmd': u"virsh -r net-dhcp-leases default | grep -i 00 >>>>> :16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", u'end': >>>>> u'2019-02-25 12:55:26.666925', u'_ansible_no_log': False, u'stdout': u'', >>>>> u'changed': True, u'invocation': {u'module_args': {u'warn': True, >>>>> u'executable': >>>>> None, u'_uses_shell': True, u'_raw_params': u"virsh -r >>>>> net-dhcp-leases default | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | >>>>> cut -f1 -d'/'", u'removes': None, u'argv': None, u'creates': None, >>>>> u'chdir': None, u'std >>>>> in': None}}, u'start': u'2019-02-25 12:55:26.584686', u'attempts': >>>>> 50, u'stderr': u'', u'rc': 0, u'delta': u'0:00:00.082239', u'stdout_lines': >>>>> []} >>>>> 2019-02-25 12:55:26,924+0100 ERROR >>>>> otopi.ovirt_hosted_engine_setup.ansible_utils >>>>> ansible_utils._process_output:107 fatal: [localhost]: FAILED! => >>>>> {"attempts": 50, "changed": true, "cmd": "virsh -r net-dhcp-leases default >>>>> | grep -i 00:16:3e:3e:fe:28 | awk '{ print $5 }' | cut -f1 -d'/'", "delta": >>>>> "0:00:00.082239", "end": "2019-02-25 12:55:26.666925", "rc": 0, "start": >>>>> "2019-02-25 12:55:26.584686", "stderr": "", "stderr_lines": [], "stdout": >>>>> "", "stdout_lines": []} >>>>> >>>> >>>> Here we are just waiting for the bootstrap engine VM to fetch an IP >>>> address from default libvirt network over DHCP but it your case it never >>>> happened. >>>> Possible issues: something went wrong in the bootstrap process for the >>>> engine VM or the default libvirt network is not correctly configured. >>>> >>>> 1. can you try to reach the engine VM via VNC and check what's >>>> happening there? (another question, are you running it nested? AFAIK it >>>> will not work if nested over ESXi) >>>> 2. can you please share the output of >>>> cat /etc/libvirt/qemu/networks/default.xml >>>> >>>> >>>>> >>>>> Guillaume Pavese >>>>> Ingénieur Système et Réseau >>>>> Interactiv-Group >>>>> _______________________________________________ >>>>> Users mailing list -- users(a)ovirt.org >>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>> oVirt Code of Conduct: >>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>> List Archives: >>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/VXRMU3SQWTM... >>>>> >>>> _______________________________________________ >>> Users mailing list -- users(a)ovirt.org >>> To unsubscribe send an email to users-leave(a)ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/45UR44ITQTV... >>> >>