[ovirt-users] Re: Ovirt cluster unstable; gluster to blame (again)

Just to add my .02 here. I've opened a bug on this issue where HV/host connected to clusterfs volumes are running out of ram. This seemed to be a bug fixed in gluster 3.13 but that patch doesn't seem to be avaiable any longer and 3.12 is what ovirt is using. For example I have a host that was showing 72% of memory consumption with 3 VMs running on it. If I migrate those VMs to another Host memory consumption drops to 52%. If i put this host into maintenance and then activate it it drops down to 2% or so. Since I ran into this issue I've been manually watching memory consumption on each host and migrating VMs from it to others to keep things from dying. I'm hoping with the announcement of gluster 3.12 end of life and the move to gluster 4.1 that this will get fixed or that the patch from 3.13 can get backported so this problem will go away. https://bugzilla.redhat.com/show_bug.cgi?id=1593826 On 07/07/2018 11:49 AM, Jim Kusznir wrote: **Security Notice - This external email is NOT from The Hut Group** This host has NO VMs running on it, only 3 running cluster-wide (including the engine, which is on its own storage): top - 10:44:41 up 1 day, 17:10, 1 user, load average: 15.86, 14.33, 13.39 Tasks: 381 total, 1 running, 379 sleeping, 1 stopped, 0 zombie %Cpu(s): 2.7 us, 2.1 sy, 0.0 ni, 89.0 id, 6.1 wa, 0.0 hi, 0.2 si, 0.0 st KiB Mem : 32764284 total, 338232 free, 842324 used, 31583728 buff/cache KiB Swap: 12582908 total, 12258660 free, 324248 used. 31076748 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13279 root 20 0 2380708 37628 4396 S 51.7 0.1 3768:03 glusterfsd 13273 root 20 0 2233212 20460 4380 S 17.2 0.1 105:50.44 glusterfsd 13287 root 20 0 2233212 20608 4340 S 4.3 0.1 34:27.20 glusterfsd 16205 vdsm 0 -20 5048672 88940 13364 S 1.3 0.3 0:32.69 vdsmd 16300 vdsm 20 0 608488 25096 5404 S 1.3 0.1 0:05.78 python 1109 vdsm 20 0 3127696 44228 8552 S 0.7 0.1 18:49.76 ovirt-ha-broker 25555 root 20 0 0 0 0 S 0.7 0.0 0:00.13 kworker/u64:3 10 root 20 0 0 0 0 S 0.3 0.0 4:22.36 rcu_sched 572 root 0 -20 0 0 0 S 0.3 0.0 0:12.02 kworker/1:1H 797 root 20 0 0 0 0 S 0.3 0.0 1:59.59 kdmwork-253:2 877 root 0 -20 0 0 0 S 0.3 0.0 0:11.34 kworker/3:1H 1028 root 20 0 0 0 0 S 0.3 0.0 0:35.35 xfsaild/dm-10 1869 root 20 0 1496472 10540 6564 S 0.3 0.0 2:15.46 python 3747 root 20 0 0 0 0 D 0.3 0.0 0:01.21 kworker/u64:1 10979 root 15 -5 723504 15644 3920 S 0.3 0.0 22:46.27 glusterfs 15085 root 20 0 680884 10792 4328 S 0.3 0.0 0:01.13 glusterd 16102 root 15 -5 1204216 44948 11160 S 0.3 0.1 0:18.61 supervdsmd At the moment, the engine is barely usable, my other VMs appear to be unresponsive. Two on one host, one on another, and none on the third. On Sat, Jul 7, 2018 at 10:38 AM, Jim Kusznir <jim(a)palousetech.com&gt; wrote: > I run 4-7 VMs, and most of them are 2GB ram. I have 2 VMs with 4GB. > > Ram hasn't been an issue until recent ovirt/gluster upgrades. Storage > has always been slow, especially with these drives. However, even watching > network utilization on my switch, the gig-e links never max out. > > The loadavg issues and unresponsive behavior started with yesterday's > ovirt updates. I now have one VM with low I/O that lives on a separate > storage volume (data, fully SSD backed instead of data-hdd, which was > having the issues). I moved it to a ovirt host with no other VMs on it, > and that had reshly been rebooted. Before it had this one VM on it, > loadavg was >0.5. Now its up in the 20's, with only one low Disk I/O, 4GB > ram VM on the host. > > This to me says there's now a new problem separate from Gluster. I don't > have any non-gluster storage available to test with. I did notice that the > last update included a new kernel, and it appears its the qemu-kvm > processes that are consuming way more CPU than they used to now. > > Are there any known issues? I'm going to reboot into my previous kernel > to see if its kernel-caused. > > --Jim > > > > On Fri, Jul 6, 2018 at 11:07 PM, Johan Bernhardsson <johan(a)kafit.se&gt; > wrote: > >> That is a single sata drive that is slow on random I/O and that has to >> be synced with 2 other servers. Gluster works syncronous so one write has >> to be written and acknowledged on all the three nodes. >> >> So you have a bottle neck in io on drives and one on network and >> depending on how many virtual servers you have and how much ram they take >> you might have memory. >> >> Load spikes when you have a wait somewhere and are overusing capacity. >> But it's now only CPU that load is counted on. It is waiting for resources >> so it can be memory or Network or drives. >> >> How many virtual server do you run and how much ram do they consume? >> >> On July 7, 2018 09:51:42 Jim Kusznir <jim(a)palousetech.com&gt; wrote: >> >>> In case it matters, the data-hdd gluster volume uses these hard drives: >>> >>> https://www.amazon.com/gp/product/B01M1NHCZT/ref=oh_aui_deta >>> ilpage_o05_s00?ie=UTF8&psc=1 >>> >>> This is in a Dell R610 with PERC6/i (one drive per server, configured >>> as a single drive volume to pass it through as its own /dev/sd* device). >>> Inside the OS, its partitioned with lvm_thin, then an lvm volume formatted >>> with XFS and mounted as /gluster/brick3, with the data-hdd volume created >>> inside that. >>> >>> --Jim >>> >>> On Fri, Jul 6, 2018 at 10:45 PM, Jim Kusznir <jim(a)palousetech.com&gt; >>> wrote: >>> >>>> So, I'm still at a loss...It sounds like its either insufficient >>>> ram/swap, or insufficient network. It seems to be neither now. At this >>>> point, it appears that gluster is just "broke" and killing my systems for >>>> no descernable reason. Here's detals, all from the same system (currently >>>> running 3 VMs): >>>> >>>> [root@ovirt3 ~]# w >>>> 22:26:53 up 36 days, 4:34, 1 user, load average: 42.78, 55.98, >>>> 53.31 >>>> USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT >>>> root pts/0 192.168.8.90 22:26 2.00s 0.12s 0.11s w >>>> >>>> bwm-ng reports the highest data usage was about 6MB/s during this test >>>> (and that was combined; I have two different gig networks. One gluster >>>> network (primary VM storage) runs on one, the other network handles >>>> everything else). >>>> >>>> [root@ovirt3 ~]# free -m >>>> total used free shared buff/cache >>>> available >>>> Mem: 31996 13236 232 18 18526 >>>> 18195 >>>> Swap: 16383 1475 14908 >>>> >>>> top - 22:32:56 up 36 days, 4:41, 1 user, load average: 17.99, >>>> 39.69, 47.66 >>>> Tasks: 407 total, 1 running, 405 sleeping, 1 stopped, 0 zombie >>>> %Cpu(s): 8.6 us, 2.1 sy, 0.0 ni, 87.6 id, 1.6 wa, 0.0 hi, 0.1 >>>> si, 0.0 st >>>> KiB Mem : 32764284 total, 228296 free, 13541952 used, 18994036 >>>> buff/cache >>>> KiB Swap: 16777212 total, 15246200 free, 1531012 used. 18643960 avail >>>> Mem >>>> >>>> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ >>>> COMMAND >>>> >>>> 30036 qemu 20 0 6872324 5.2g 13532 S 144.6 16.5 216:14.55 >>>> /usr/libexec/qemu-kvm -name guest=BillingWin,debug-threads=on -S >>>> -object secret,id=masterKey0,format=raw,file=/v+ >>>> 28501 qemu 20 0 5034968 3.6g 12880 S 16.2 11.7 73:44.99 >>>> /usr/libexec/qemu-kvm -name guest=FusionPBX,debug-threads=on -S >>>> -object secret,id=masterKey0,format=raw,file=/va+ >>>> 2694 root 20 0 2169224 12164 3108 S 5.0 0.0 3290:42 >>>> /usr/sbin/glusterfsd -s ovirt3.nwfiber.com --volfile-id >>>> data.ovirt3.nwfiber.com.gluster-brick2-data -p /var/run/+ >>>> 14293 root 15 -5 944700 13356 4436 S 4.0 0.0 16:32.15 >>>> /usr/sbin/glusterfs --volfile-server=192.168.8.11 >>>> --volfile-server=192.168.8.12 --volfile-server=192.168.8.13 --+ >>>> 25100 vdsm 0 -20 6747440 107868 12836 S 2.3 0.3 21:35.20 >>>> /usr/bin/python2 /usr/share/vdsm/vdsmd >>>> >>>> 28971 qemu 20 0 2842592 1.5g 13548 S 1.7 4.7 241:46.49 >>>> /usr/libexec/qemu-kvm -name guest=unifi.palousetech.com,debug-threads=on >>>> -S -object secret,id=masterKey0,format=+ >>>> 12095 root 20 0 162276 2836 1868 R 1.3 0.0 0:00.25 >>>> top >>>> >>>> 2708 root 20 0 1906040 12404 3080 S 1.0 0.0 1083:33 >>>> /usr/sbin/glusterfsd -s ovirt3.nwfiber.com --volfile-id >>>> engine.ovirt3.nwfiber.com.gluster-brick1-engine -p /var/+ >>>> 28623 qemu 20 0 4749536 1.7g 12896 S 0.7 5.5 4:30.64 >>>> /usr/libexec/qemu-kvm -name guest=billing.nwfiber.com,debug-threads=on >>>> -S -object secret,id=masterKey0,format=ra+ >>>> 10 root 20 0 0 0 0 S 0.3 0.0 215:54.72 >>>> [rcu_sched] >>>> >>>> 1030 sanlock rt 0 773804 27908 2744 S 0.3 0.1 35:55.61 >>>> /usr/sbin/sanlock daemon >>>> >>>> 1890 zabbix 20 0 83904 1696 1612 S 0.3 0.0 24:30.63 >>>> /usr/sbin/zabbix_agentd: collector [idle 1 sec] >>>> >>>> 2722 root 20 0 1298004 6148 2580 S 0.3 0.0 38:10.82 >>>> /usr/sbin/glusterfsd -s ovirt3.nwfiber.com --volfile-id >>>> iso.ovirt3.nwfiber.com.gluster-brick4-iso -p /var/run/gl+ >>>> 6340 root 20 0 0 0 0 S 0.3 0.0 0:04.30 >>>> [kworker/7:0] >>>> >>>> 10652 root 20 0 0 0 0 S 0.3 0.0 0:00.23 >>>> [kworker/u64:2] >>>> >>>> 14724 root 20 0 1076344 17400 3200 S 0.3 0.1 10:04.13 >>>> /usr/sbin/glusterfs -s localhost --volfile-id gluster/glustershd -p >>>> /var/run/gluster/glustershd/glustershd.pid -+ >>>> 22011 root 20 0 0 0 0 S 0.3 0.0 0:05.04 >>>> [kworker/10:1] >>>> >>>> >>>> Not sure why the system load dropped other than I was trying to take a >>>> picture of it :) >>>> >>>> In any case, it appears that at this time, I have plenty of swap, ram, >>>> and network capacity, and yet things are still running very sluggish; I'm >>>> still getting e-mails from servers complaining about loss of communication >>>> with something or another; I still get e-mails from the engine about bad >>>> engine status, then recovery, etc. >>>> >>>> I've shut down 2/3 of my VMs, too....just trying to keep the critical >>>> ones operating. >>>> >>>> At this point, I don't believe the problem is the memory leak, but it >>>> seems to be triggered by the memory leak, as in all my problems started >>>> when I got low ram warnings from one of my 3 nodes and began recovery >>>> efforts from that. >>>> >>>> I do really like the idea / concept behind glusterfs, but I really >>>> have to figure out why its been so poor performing from day one, and its >>>> caused 95% of my outages (including several large ones lately). If I can >>>> get it stable, reliable, and well performing, then I'd love to keep it. If >>>> I can't, then perhaps NFS is the way to go? I don't like the single point >>>> of failure aspect of it, but my other NAS boxes I run for clients (central >>>> storage for windows boxes) have been very solid; If I could get that kind >>>> of reliability for my ovirt stack, it would be a substantial improvement. >>>> Currently, it seems about every other month I have a gluster-induced outage. >>>> >>>> Sometimes I wonder if its just hyperconverged is the issue, but my >>>> infrastructure doesn't justify three servers at the same location...I might >>>> be able to do two, but even that seems like its pushing it. >>>> >>>> Looks like I can upgrade to 10G for about $900. I can order a >>>> dual-Xeon supermicro 12-disk server, loaded with 2TB WD Enterprise disks >>>> and a pair of SSDs for the os, 32GB ram, 2.67Ghz CPUs for about $720 >>>> delivered. I've got to do something to improve my reliability; I can't >>>> keep going the way I have been.... >>>> >>>> --Jim >>>> >>>> >>>> On Fri, Jul 6, 2018 at 9:13 PM, Johan Bernhardsson <johan(a)kafit.se&gt; >>>> wrote: >>>> >>>>> Load like that is mostly io based either the machine is swapping or >>>>> network is to slow. Check I/o wait in top. >>>>> >>>>> And the problem where you get oom killer to kill off gluster. That >>>>> means that you don't monitor ram usage on the servers? Either it's eating >>>>> all your ram and swap gets really io intensive and then is killed off. Or >>>>> you have the wrong swap settings in sysctl.conf (there are tons of broken >>>>> guides that recommends swappines to 0 but that disables swap on newer >>>>> kernels. The proper swappines for only swapping when nesseary is 1 or a >>>>> sufficiently low number like 10 default is 60) >>>>> >>>>> >>>>> Moving to nfs will not improve things. You will get more memory since >>>>> gluster isn't running and that is good. But you will have a single node >>>>> that can fail with all your storage and it would still be on 1 gigabit only >>>>> and your three node cluster would easily saturate that link. >>>>> >>>>> On July 7, 2018 04:13:13 Jim Kusznir <jim(a)palousetech.com&gt; wrote: >>>>> >>>>>> So far it does not appear to be helping much. I'm still getting VM's >>>>>> locking up and all kinds of notices from overt engine about non-responsive >>>>>> hosts. I'm still seeing load averages in the 20-30 range. >>>>>> >>>>>> Jim >>>>>> >>>>>> On Fri, Jul 6, 2018, 3:13 PM Jim Kusznir <jim(a)palousetech.com&gt; >>>>>> wrote: >>>>>> >>>>>>> Thank you for the advice and help >>>>>>> >>>>>>> I do plan on going 10Gbps networking; haven't quite jumped off that >>>>>>> cliff yet, though. >>>>>>> >>>>>>> I did put my data-hdd (main VM storage volume) onto a dedicated >>>>>>> 1Gbps network, and I've watched throughput on that and never seen more than >>>>>>> 60GB/s achieved (as reported by bwm-ng). I have a separate 1Gbps network >>>>>>> for communication and ovirt migration, but I wanted to break that up >>>>>>> further (separate out VM traffice from migration/mgmt traffic). My three >>>>>>> SSD-backed gluster volumes run the main network too, as I haven't been able >>>>>>> to get them to move to the new network (which I was trying to use as all >>>>>>> gluster). I tried bonding, but that seamed to reduce performance rather >>>>>>> than improve it. >>>>>>> >>>>>>> --Jim >>>>>>> >>>>>>> On Fri, Jul 6, 2018 at 2:52 PM, Jamie Lawrence < >>>>>>> jlawrence(a)squaretrade.com&gt; wrote: >>>>>>> >>>>>>>> Hi Jim, >>>>>>>> >>>>>>>> I don't have any targeted suggestions, because there isn't much to >>>>>>>> latch on to. I can say Gluster replica three (no arbiters) on dedicated >>>>>>>> servers serving a couple Ovirt VM clusters here have not had these sorts of >>>>>>>> issues. >>>>>>>> >>>>>>>> I suspect your long heal times (and the resultant long periods of >>>>>>>> high load) are at least partly related to 1G networking. That is just a >>>>>>>> matter of IO - heals of VMs involve moving a lot of bits. My cluster uses >>>>>>>> 10G bonded NICs on the gluster and ovirt boxes for storage traffic and >>>>>>>> separate bonded 1G for ovirtmgmt and communication with other >>>>>>>> machines/people, and we're occasionally hitting the bandwidth ceiling on >>>>>>>> the storage network. I'm starting to think about 40/100G, different ways of >>>>>>>> splitting up intensive systems, and considering iSCSI for specific volumes, >>>>>>>> although I really don't want to go there. >>>>>>>> >>>>>>>> I don't run FreeNAS[1], but I do run FreeBSD as storage servers >>>>>>>> for their excellent ZFS implementation, mostly for backups. ZFS will make >>>>>>>> your `heal` problem go away, but not your bandwidth problems, which become >>>>>>>> worse (because of fewer NICS pushing traffic). 10G hardware is not exactly >>>>>>>> in the impulse-buy territory, but if you can, I'd recommend doing some >>>>>>>> testing using it. I think at least some of your problems are related. >>>>>>>> >>>>>>>> If that's not possible, my next stops would be optimizing >>>>>>>> everything I could about sharding, healing and optimizing for serving the >>>>>>>> shard size to squeeze as much performance out of 1G as I could, but that >>>>>>>> will only go so far. >>>>>>>> >>>>>>>> -j >>>>>>>> >>>>>>>> [1] FreeNAS is just a storage-tuned FreeBSD with a GUI. >>>>>>>> >>>>>>>> > On Jul 6, 2018, at 1:19 PM, Jim Kusznir <jim(a)palousetech.com&gt; >>>>>>>> wrote: >>>>>>>> > >>>>>>>> > hi all: >>>>>>>> > >>>>>>>> > Once again my production ovirt cluster is collapsing in on >>>>>>>> itself. My servers are intermittently unavailable or degrading, customers >>>>>>>> are noticing and calling in. This seems to be yet another gluster failure >>>>>>>> that I haven't been able to pin down. >>>>>>>> > >>>>>>>> > I posted about this a while ago, but didn't get anywhere (no >>>>>>>> replies that I found). The problem started out as a glusterfsd process >>>>>>>> consuming large amounts of ram (up to the point where ram and swap were >>>>>>>> exhausted and the kernel OOM killer killed off the glusterfsd process). >>>>>>>> For reasons not clear to me at this time, that resulted in any VMs running >>>>>>>> on that host and that gluster volume to be paused with I/O error (the >>>>>>>> glusterfs process is usually unharmed; why it didn't continue I/O with >>>>>>>> other servers is confusing to me). >>>>>>>> > >>>>>>>> > I have 3 servers and a total of 4 gluster volumes (engine, iso, >>>>>>>> data, and data-hdd). The first 3 are replica 2+arb; the 4th (data-hdd) is >>>>>>>> replica 3. The first 3 are backed by an LVM partition (some thin >>>>>>>> provisioned) on an SSD; the 4th is on a seagate hybrid disk (hdd + some >>>>>>>> internal flash for acceleration). data-hdd is the only thing on the disk. >>>>>>>> Servers are Dell R610 with the PERC/6i raid card, with the disks >>>>>>>> individually passed through to the OS (no raid enabled). >>>>>>>> > >>>>>>>> > The above RAM usage issue came from the data-hdd volume. >>>>>>>> Yesterday, I cought one of the glusterfsd high ram usage before the >>>>>>>> OOM-Killer had to run. I was able to migrate the VMs off the machine and >>>>>>>> for good measure, reboot the entire machine (after taking this opportunity >>>>>>>> to run the software updates that ovirt said were pending). Upon booting >>>>>>>> back up, the necessary volume healing began. However, this time, the >>>>>>>> healing caused all three servers to go to very, very high load averages (I >>>>>>>> saw just under 200 on one server; typically they've been 40-70) with top >>>>>>>> reporting IO Wait at 7-20%. Network for this volume is a dedicated gig >>>>>>>> network. According to bwm-ng, initially the network bandwidth would hit >>>>>>>> 50MB/s (yes, bytes), but tailed off to mostly in the kB/s for a while. All >>>>>>>> machines' load averages were still 40+ and gluster volume heal data-hdd >>>>>>>> info reported 5 items needing healing. Server's were intermittently >>>>>>>> experiencing IO issues, even on the 3 gluster volumes that appeared largely >>>>>>>> unaffected. Even the OS activities on the hosts itself (logging in, >>>>>>>> running commands) would often be very delayed. The ovirt engine was >>>>>>>> seemingly randomly throwing engine down / engine up / engine failed >>>>>>>> notifications. Responsiveness on ANY VM was horrific most of the time, >>>>>>>> with random VMs being inaccessible. >>>>>>>> > >>>>>>>> > I let the gluster heal run overnight. By morning, there were >>>>>>>> still 5 items needing healing, all three servers were still experiencing >>>>>>>> high load, and servers were still largely unstable. >>>>>>>> > >>>>>>>> > I've noticed that all of my ovirt outages (and I've had a lot, >>>>>>>> way more than is acceptable for a production cluster) have come from >>>>>>>> gluster. I still have 3 VMs who's hard disk images have become corrupted >>>>>>>> by my last gluster crash that I haven't had time to repair / rebuild yet (I >>>>>>>> believe this crash was caused by the OOM issue previously mentioned, but I >>>>>>>> didn't know it at the time). >>>>>>>> > >>>>>>>> > Is gluster really ready for production yet? It seems so >>>>>>>> unstable to me.... I'm looking at replacing gluster with a dedicated NFS >>>>>>>> server likely FreeNAS. Any suggestions? What is the "right" way to do >>>>>>>> production storage on this (3 node cluster)? Can I get this gluster volume >>>>>>>> stable enough to get my VMs to run reliably again until I can deploy >>>>>>>> another storage solution? >>>>>>>> > >>>>>>>> > --Jim >>>>>>>> > _______________________________________________ >>>>>>>> > Users mailing list -- users(a)ovirt.org >>>>>>>> > To unsubscribe send an email to users-leave(a)ovirt.org >>>>>>>> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>>>> > oVirt Code of Conduct: https://www.ovirt.org/communit >>>>>>>> y/about/community-guidelines/ >>>>>>>> > List Archives: https://lists.ovirt.org/archiv >>>>>>>> es/list/users(a)ovirt.org/message/YQX3LQFQQPW4JTCB7B6FY2LLR6NA2CB3/ >>>>>>>> >>>>>>>> >>>>>>> _______________________________________________ >>>>>> Users mailing list -- users(a)ovirt.org >>>>>> To unsubscribe send an email to users-leave(a)ovirt.org >>>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>>> oVirt Code of Conduct: https://www.ovirt.org/communit >>>>>> y/about/community-guidelines/ >>>>>> List Archives: https://lists.ovirt.org/archiv >>>>>> es/list/users(a)ovirt.org/message/O2HIECLFMYGKH3KSZHHSMDUVGOEBI7GQ/ >>>>>> >>>>> >>>>> >>>> >>> >> > _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/T2M4J3Z7RPS... Edward Clay Systems Administrator The Hut Group <http://www.thehutgroup.com/> Tel: Email: edward.clay(a)uk2group.com For the purposes of this email, the "company" means The Hut Group Limited, a company registered in England and Wales (company number 6539496) whose registered office is at Fifth Floor, Voyager House, Chicago Avenue, Manchester Airport, M90 3DQ and/or any of its respective subsidiaries. *Confidentiality Notice* This e-mail is confidential and intended for the use of the named recipient only. If you are not the intended recipient please notify us by telephone immediately on +44(0)1606 811888 or return it to us by e-mail. Please then delete it from your system and note that any use, dissemination, forwarding, printing or copying is strictly prohibited. Any views or opinions are solely those of the author and do not necessarily represent those of the company. *Encryptions and Viruses* Please note that this e-mail and any attachments have not been encrypted. They may therefore be liable to be compromised. Please also note that it is your responsibility to scan this e-mail and any attachments for viruses. We do not, to the extent permitted by law, accept any liability (whether in contract, negligence or otherwise) for any virus infection and/or external compromise of security and/or confidentiality in relation to transmissions sent by e-mail. *Monitoring* Activity and use of the company's systems is monitored to secure its effective use and operation and for other lawful business purposes. Communications using these systems will also be monitored and may be recorded to secure effective use and operation and for other lawful business purposes. hgvyjuv _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community- guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/ message/Y2ZFGU2XDAXPMNLPQVHRDTNJQDFVWGCL/