Hey Bill and Daniel,
it would indeed be interesting - mandatory - to know if it's qla* or qxl (qxl is IMHO
related to graphics).
Once we know that I'll see if the bug below fixes it.
I'd need your help to verify that we are also including all relevant dependencies.
Thanks
- fabian
----- Original Message -----
Hi Daniel,
I did a lsmod | grep qxl and it returned nothing... did you perhaps mean
qla?
[root@ovirt141 ~]# lsmod | grep qla
qla2xxx 466573 56
I think that is the one
lsscsi does list all of the LUNs... so that's working!
But nothing in ovirt engine when I try to add a storage domain.
Thanks again, I guess I will try and get a bit further with the installs I
have...
Bill
-----Original Message-----
From: Daniel Helgenberger [mailto:daniel.helgenberger@m-box.de]
Sent: 11 September 2014 11:53
To: Bill Dossett
Subject: Re: [ovirt-users] FC QLogic question
On 11.09.2014 12:17, Bill Dossett wrote:
> Thanks for responding Daniel.
Never mind!
> I was wondering and thought the message may be irrelevant. But yes,
> it doesn't appear to be working. When I try to add a FC storage
> domain, no hosts are showing in the drop down box of hosts. I have
> loaded the latests ovirtnode (3.4.something...) on two hosts now and
> neither are working.
Lets first try to isolate your FC issure. So you are using the latest
ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore
should support Qlogic adapters out of the box (IMHO they are the best
supported HBAs in Linux).
Please try a:
# lsmod | grep qxl
to see whatever the qxl module is loaded. Keep in mind you can run into
problems with other conrollers in your host, though I only had this with LSI
SAS / FC controllers so far.
Further check on the FC switch if the N port is logged in and the zoning is
correct.
Finally, check with
# lsscsi
if you can see the luns.
> Also having a lot of issues with configuring the network. I configure
> an interface I can ping it, but it shows as unconfigured... on one host
> I have added it to the manager and I see the interfaces anyway, but on
> the second host I configure the eth0, I can ping it, it added to the
> ovirt engine but it shows no NICs. Should I be using an earlier version
> maybe?
>
> thanks again and best regards.
>
>
> *Bill Dossett*
> *Virtualisation Architect*
> *Pitney Bowes - Tech Central***
> 6 Hercules Way, 600 Leavesden Park
> Watford, WD25 7GS
> Phone(+44) (0)1923 279353 | VOIP: 54739353
> Mobile(+44) (0)7775 908612
> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com>
www.pb.com
> <
http://www.pb.com/> *In Engineering?**Raise a ticket via Remedy
> Anywhere [HERE
> <
http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident
> /newIncident.aspx>]takes
> less than a minute*
>
> *ManageIQ User Guide available* [*HERE
> <
https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20
> v4.pdf>*] *Check out the ManageIQ Blog for recent enhancements and
> information [HERE]
> <
http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>*
>
> On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger
> <daniel.helgenberger(a)m-box.de <mailto:daniel.helgenberger@m-box.de>>
wrote:
>
> > Hello Bill,
> >
> > what are your problems acually? Is fibre channel not working (as
> > expected)?
> >
> > The log snippet you provided is completly normal and the messages
> > can safely be ignored. This is also unrelated to oVirt but rather
> > CentOS (or the distro you are running) I suppose.
> >
> > Cheers!
> >
> > On 11.09.2014 10:51, Bill Dossett wrote:
> >> Hi,
> >>
> >> I seem to have run into a problem setting up ovirt with Fibre Channel
> >> storage.
> >>
> >> I have a 2MBs SAN and qlogic cards in the nodes. I used this same
> >> setup with RHEV about 6 months ago and it just worked, storage was
> >> there no problems. Now booting with ovirtnode distro, I am seeing
> >>
> >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1:
> >> Firmware images can be retrieved from:
> >>
http://ldriver.qlogic.com/firmware/.
> >>
> >> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx
> >>
> >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1:
> >> QLogic QLE2460
> >> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x.
> >>
> >> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1:
> >> ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2).
> >>
> >> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A
> >> -> GSI 16 (level, low) -> IRQ 16
> >>
> >> I have googled the firmware error and it says some cards need a
> >> firmware flash and some don't. These are pretty standard HBAs so I
> >> would think they would be supported out of the box, but maybe not.
> >> Looking at trying to add the firmware looked kind of complex - if I
> >> need to do this, does anyone know of a nice and easy howto guide on
> >> this. I'm just getting started with ovirt and appreciate any help
> >>
> >>
> >> Thanks
> >>
> >> *Bill Dossett*
> >>
> >> *Virtualisation Architect*
> >>
> >> *Pitney Bowes - Tech Central***
> >>
> >> 6 Hercules Way, 600 Leavesden Park
> >>
> >> Watford, WD25 7GS
> >>
> >> Phone(+44) (0)1923 279353 | VOIP: 54739353
> >>
> >> Mobile(+44) (0)7775 908612
> >>
> >> bill.dossett(a)pb.com <mailto:bill.dossett@pb.com>
> >> <mailto:bill.dossett@pb.com>
> >>
> >>
www.pb.com <
http://www.pb.com> <
http://www.pb.com/>
> >>
> >> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE
> >> <
http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid
> >> ent/newIncident.aspx>]takes
> >>
> >> less than a minute*
> >>
> >> *ManageIQ User Guide available*[*HERE
> >> <
https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB
> >> %20v4.pdf>*]
> >>
> >> *Check out the ManageIQ Blog for recent enhancements and
> >> information [HERE]
> >> <
http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.asp
> >> x>*
> >>
> >>
> >> -------------------------------------------------------------------
> >> -------------
> >>
> >
> > --
> > Daniel Helgenberger
> > m box bewegtbild GmbH
> >
> > P: +49/30/2408781-22
> > F: +49/30/2408781-10
> >
> > ACKERSTR. 19
> > D-10115 BERLIN
> >
> >
> >
www.m-box.de <
http://www.m-box.de> www.monkeymen.tv
> > <
http://www.monkeymen.tv>
> >
> > Geschäftsführer: Martin Retschitzegger / Michaela Göllner
> > Handeslregister: Amtsgericht Charlottenburg / HRB 112767
> >
>
>
> ----------------------------------------------------------------------
> ----------
>
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
Geschäftsführer: Martin Retschitzegger / Michaela Göllner
Handeslregister: Amtsgericht Charlottenburg / HRB 112767
________________________________
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users