[ovirt-users] Slow conversion from VMware in 4.1

Hello, i've started my migrations from vmware today. I had successfully migrated over 200 VM from vmware to another cluster based on 4.0 using our home-made scripts interacting with the API's. All the migrated vms are running RHEL 6 or 7, with no SELinux. We understood a lot about the necessities and we recorded also some metrics about migration times. In July, with 4.0 as destination, we were migrating ~30gb vm in ~40 mins. It was an acceptable time, considering that about 50% of our vms stand around that size. Today we started migrating to the production cluster, that is, instead, running 4.1.8. With the same scripts, the same api calls, and a vm of about 50gb we were supposing that we will have the vm running in the new cluster after 70 minutes, more or less. Instead, the migration is taking more than 2 hours, and this not because of the slow conversion time by qemu-img given that we're transferring an entire disk via http. Looking at the log, seems that activities executed before qemu-img took more than 2000 seconds. As example, appears to me that dracut took more than 14 minutes, which is in my opinion a bit long. Is there any option to get a quicker conversion? Also some tasks to run in the guests before the conversion are accepted. We have to migrate ~300 vms in 2.5 months, and we're only at 11 after 7 hours (and today an exception that allowed us to start 4 hours in advance, but usually our maintenance time is significantly lower). This is a filtered out log reporting only the rows were we can understand how much time has passed: [ 0.0] Opening the source -i libvirt -ic vpx://vmwareuser%40domain@vcenter/DC/Cluster/Host?no_verify=1 vmtoconvert [ 6.1] Creating an overlay to protect the source from being modified [ 7.4] Initializing the target -o vdsm -os /rhev/data-center/e8263fb4-114d-4706-b1c0-5defcd15d16b/a118578a-4cf2-4e0c-ac47-20e9f0321da1 --vdsm-image-uuid 1a93e503-ce57-4631-8dd2-eeeae45866ca --vdsm-vol-uuid 88d92582-0f53-43b0-89ff-af1c17ea8618 --vdsm-vm-uuid 1434e14f-e228-41c1-b769-dcf48b258b12 --vdsm-ovf-output /var/run/vdsm/v2v [ 7.4] Opening the overlay [00034ms] /usr/libexec/qemu-kvm \ [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-693.11.1.el7.x86_64 (mockbuild(a)x86-041.build.eng.bos.redhat.com) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-16) (GCC) ) #1 SMP Fri Oct 27 05:39:05 EDT 2017 [ 0.000000] Command line: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1 guestfs_network=1 TERM=linux guestfs_identifier=v2v [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007cfddfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007cfde000-0x000000007cffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820: last_pfn = 0x7cfde max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f72f0-0x000f72ff] mapped at [ffff8800000f72f0] [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x7ccb2000-0x7cfcffff] [ 0.000000] Early table checksum verification disabled [ 0.000000] ACPI: RSDP 00000000000f70d0 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000007cfe14d5 0002C (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000007cfe13e9 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000007cfe0040 013A9 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 000000007cfe0000 00040 [ 0.000000] ACPI: APIC 000000007cfe145d 00078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cfddfff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7cc8b000-0x7ccb1fff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:7cc3b001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 1030608733 cycles [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0x7cfddfff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x7cfddfff] [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x7d000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007ca00000 s97048 r8192 d29928 u2097152 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 7ca0f440 [ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes) [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 503847 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: panic=1 console=ttyS0 edd=off udevtimeout=6000 udev.event-timeout=6000 no_timer_check printk.time=1 cgroup_disable=memory usbcore.nousb cryptomgr.notests tsc=reliable 8250.nr_uarts=1 root=/dev/sdb selinux=0 guestfs_verbose=1 guestfs_network=1 TERM=linux guestfs_identifier=v2v [ 0.000000] Disabling memory control group subsystem [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 1994224k/2047864k available (6886k kernel code, 392k absent, 53248k reserved, 4545k data, 1764k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] \tRCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:327936 nr_irqs:256 0 [ 0.000000] Console: colour *CGA 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] tsc: Detected 2099.998 MHz processor [ 0.065500] Calibrating delay loop (skipped) preset value.. 4199.99 BogoMIPS (lpj=2099998) [ 0.066153] pid_max: default: 32768 minimum: 301 [ 0.066548] Security Framework initialized [ 0.066872] SELinux: Disabled at boot. [ 0.067181] Yama: becoming mindful. [ 0.067622] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.068574] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.069290] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.069813] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.070525] Initializing cgroup subsys memory [ 0.070877] Initializing cgroup subsys devices [ 0.071237] Initializing cgroup subsys freezer [ 0.071589] Initializing cgroup subsys net_cls [ 0.071932] Initializing cgroup subsys blkio [ 0.072275] Initializing cgroup subsys perf_event [ 0.072644] Initializing cgroup subsys hugetlb [ 0.072984] Initializing cgroup subsys pids [ 0.073316] Initializing cgroup subsys net_prio [ 0.073721] CPU: Physical Processor ID: 0 [ 0.074810] mce: CPU supports 10 MCE banks [ 0.075185] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.075621] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.076030] tlb_flushall_shift: 6 [ 0.085827] Freeing SMP alternatives: 24k freed [ 0.091125] ACPI: Core revision 20130517 [ 0.091976] ACPI: All ACPI Tables successfully acquired [ 0.092448] ftrace: allocating 26586 entries in 104 pages [ 0.116144] smpboot: Max logical packages: 1 [ 0.116640] Enabling x2apic [ 0.116863] Enabled x2apic [ 0.117290] Switched APIC routing to physical x2apic. [ 0.118588] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.119054] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2683 v4 @ 2.10GHz (fam: 06, model: 4f, stepping: 01) [ 0.119813] Performance Events: 16-deep LBR, Broadwell events, Intel PMU driver. [ 0.121545] ... version: 2 [ 0.121847] ... bit width: 48 [ 0.122161] ... generic registers: 4 [ 0.122472] ... value mask: 0000ffffffffffff [ 0.122874] ... max period: 000000007fffffff [ 0.123276] ... fixed-purpose events: 3 [ 0.123584] ... event mask: 000000070000000f [ 0.124004] KVM setup paravirtual spinlock [ 0.125379] Brought up 1 CPUs [ 0.125616] smpboot: Total of 1 processors activated (4199.99 BogoMIPS) [ 0.126464] devtmpfs: initialized [ 0.128347] EVM: security.selinux [ 0.128608] EVM: security.ima [ 0.128835] EVM: security.capability [ 0.129796] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.130333] pinctrl core: initialized pinctrl subsystem [ 0.130805] RTC time: 20:26:38, date: 01/24/18 [ 0.131217] NET: Registered protocol family 16 [ 0.131774] ACPI: bus type PCI registered [ 0.132096] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.132660] PCI: Using configuration type 1 for base access [ 0.133830] ACPI: Added _OSI(Module Device) [ 0.134170] ACPI: Added _OSI(Processor Device) [ 0.134514] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.134872] ACPI: Added _OSI(Processor Aggregator Device) [ 0.137001] ACPI: Interpreter enabled [ 0.137303] ACPI: (supports S0 S5) [ 0.137573] ACPI: Using IOAPIC for interrupt routing [ 0.137971] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.140442] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.140917] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.141446] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.141961] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.142997] acpiphp: Slot [2] registered [ 0.143309] acpiphp: Slot [3] registered [ 0.143625] acpiphp: Slot [4] registered [ 0.143949] acpiphp: Slot [5] registered [ 0.144260] acpiphp: Slot [6] registered [ 0.144575] acpiphp: Slot [7] registered [ 0.144887] acpiphp: Slot [8] registered [ 0.145205] acpiphp: Slot [9] registered [ 0.145523] acpiphp: Slot [10] registered [ 0.145841] acpiphp: Slot [11] registered [ 0.146161] acpiphp: Slot [12] registered [ 0.146642] acpiphp: Slot [13] registered [ 0.146960] acpiphp: Slot [14] registered [ 0.147279] acpiphp: Slot [15] registered [ 0.147602] acpiphp: Slot [16] registered [ 0.147934] acpiphp: Slot [17] registered [ 0.148255] acpiphp: Slot [18] registered [ 0.148579] acpiphp: Slot [19] registered [ 0.148896] acpiphp: Slot [20] registered [ 0.149219] acpiphp: Slot [21] registered [ 0.149546] acpiphp: Slot [22] registered [ 0.149863] acpiphp: Slot [23] registered [ 0.150178] acpiphp: Slot [24] registered [ 0.150505] acpiphp: Slot [25] registered [ 0.150824] acpiphp: Slot [26] registered [ 0.151139] acpiphp: Slot [27] registered [ 0.151461] acpiphp: Slot [28] registered [ 0.151786] acpiphp: Slot [29] registered [ 0.152104] acpiphp: Slot [30] registered [ 0.152426] acpiphp: Slot [31] registered [ 0.152741] PCI host bridge to bus 0000:00 [ 0.153059] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.153478] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.153991] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.154508] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.155072] pci_bus 0000:00: root bus resource [mem 0x7d000000-0xfebfffff window] [ 0.162550] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.163097] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.163590] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.164129] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.165004] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.165564] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.223140] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.223712] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.224245] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.224789] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.225296] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.225817] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.226262] vgaarb: loaded [ 0.227000] SCSI subsystem initialized [ 0.227314] ACPI: bus type USB registered [ 0.227640] usbcore: registered new interface driver usbfs [ 0.228068] usbcore: registered new interface driver hub [ 0.228487] usbcore: registered new device driver usb [ 0.228936] PCI: Using ACPI for IRQ routing [ 0.229436] NetLabel: Initializing [ 0.230112] NetLabel: domain hash size = 128 [ 0.230455] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.230843] NetLabel: unlabeled traffic allowed by default [ 0.231317] amd_nb: Cannot enumerate AMD northbridges [ 0.231722] Switched to clocksource kvm-clock [ 0.235503] pnp: PnP ACPI init [ 0.235767] ACPI: bus type PNP registered [ 0.236396] pnp: PnP ACPI: found 5 devices [ 0.236716] ACPI: bus type PNP unregistered [ 0.242333] NET: Registered protocol family 2 [ 0.242806] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.243384] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.243907] TCP: Hash tables configured (established 16384 bind 16384) [ 0.244414] TCP: reno registered [ 0.244668] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.245130] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.245656] NET: Registered protocol family 1 [ 0.246013] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.246473] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.246924] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.247457] Unpacking initramfs... [ 0.249930] Freeing initrd memory: 3192k freed [ 0.251174] sha1_ssse3: Using AVX optimized SHA-1 implementation [ 0.251706] sha256_ssse3: Using AVX2 optimized SHA-256 implementation [ 0.252355] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.252836] Initialise system trusted keyring [ 0.253187] audit: initializing netlink socket (disabled) [ 0.253610] type=2000 audit(1516825598.479:1): initialized [ 0.275426] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.275927] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.277129] zpool: loaded [ 0.277350] zbud: loaded [ 0.277669] VFS: Disk quotas dquot_6.5.2 [ 0.277998] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.278609] msgmni has been set to 3901 [ 0.278956] Key type big_key registered [ 0.279450] NET: Registered protocol family 38 [ 0.279810] Key type asymmetric registered [ 0.280125] Asymmetric key parser 'x509' registered [ 0.280523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.281107] io scheduler noop registered [ 0.281416] io scheduler deadline registered (default) [ 0.281839] io scheduler cfq registered [ 0.282216] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.282648] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.283250] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.283835] ACPI: Power Button [PWRF] [ 0.284207] GHES: HEST is not enabled! [ 0.284534] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 0.307889] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.308457] Non-volatile memory driver v1.3 [ 0.308809] Linux agpgart interface v0.103 [ 0.309200] crash memory driver: version 1.1 [ 0.309568] rdac: device handler registered [ 0.309913] hp_sw: device handler registered [ 0.310247] emc: device handler registered [ 0.310565] alua: device handler registered [ 0.310922] libphy: Fixed MDIO Bus: probed [ 0.311267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.311780] ehci-pci: EHCI PCI platform driver [ 0.312129] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.312609] ohci-pci: OHCI PCI platform driver [ 0.312958] uhci_hcd: USB Universal Host Controller Interface driver [ 0.313474] usbcore: registered new interface driver usbserial [ 0.313926] usbcore: registered new interface driver usbserial_generic [ 0.314428] usbserial: USB Serial support registered for generic [ 0.314911] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.316032] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.316418] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.316857] mousedev: PS/2 mouse device common for all mice [ 0.317468] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.318561] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2 [ 0.319363] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 [ 0.320042] rtc_cmos 00:00: RTC can wake from S4 [ 0.320573] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 0.321099] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram [ 0.321632] cpuidle: using governor menu [ 0.321989] hidraw: raw HID events driver (C) Jiri Kosina [ 0.322467] usbcore: registered new interface driver usbhid [ 0.322894] usbhid: USB HID core driver [ 0.323734] drop_monitor: Initializing network drop monitor service [ 0.324272] TCP: cubic registered [ 0.324537] Initializing XFRM netlink socket [ 0.324936] NET: Registered protocol family 10 [ 0.325410] NET: Registered protocol family 17 [ 0.325872] microcode: CPU0 sig=0x406f1, pf=0x1, revision=0x1 [ 0.326331] microcode: Microcode Update Driver: v2.01 <tigran(a)aivazian.fsnet.co.uk&gt;, Peter Oruba [ 0.327060] Loading compiled-in X.509 certificates [ 0.327855] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 0.329151] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 0.330379] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: 34fc3b85a61b8fead6e9e905e7e602a1f7fa049a' [ 0.331196] registered taskstats version 1 [ 0.331639] Key type trusted registered [ 0.332056] Key type encrypted registered [ 0.332920] IMA: No TPM chip found, activating TPM-bypass! [ 0.333605] Magic number: 2:270:448 [ 0.333970] rtc_cmos 00:00: setting system clock to 2018-01-24 20:26:38 UTC (1516825598) [ 0.335302] Freeing unused kernel memory: 1764k freed [ 0.339427] alg: No test for crc32 (crc32-pclmul) [ 0.342995] alg: No test for crc32 (crc32-generic) [ 0.352535] scsi host0: ata_piix [ 0.352853] scsi host1: ata_piix [ 0.353127] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0c0 irq 14 [ 0.353645] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0c8 irq 15 [ 0.541003] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.545766] random: fast init done [ 0.548737] random: crng init done [ 0.565923] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.567592] scsi host2: Virtio SCSI HBA [ 0.569801] scsi 2:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 0.570526] scsi 2:0:1:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 0.580538] sd 2:0:0:0: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB) [ 0.581264] sd 2:0:1:0: [sdb] 8388608 512-byte logical blocks: (4.29 GB/4.00 GiB) [ 0.581894] sd 2:0:0:0: [sda] Write Protect is off [ 0.582312] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.583032] sd 2:0:1:0: [sdb] Write Protect is off [ 0.583444] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.586373] sd 2:0:1:0: [sdb] Attached SCSI disk [ 0.602190] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.636655] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 1.253809] tsc: Refined TSC clocksource calibration: 2099.994 MHz [ 1.510203] sda: sda1 sda2 sda3 [ 1.511710] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.528245] EXT4-fs (sdb): mounting ext2 file system using the ext4 subsystem [ 1.530353] EXT4-fs (sdb): mounted filesystem without journal. Opts: [/usr/lib/tmpfiles.d/systemd.conf:11] Unknown group 'utmp'. [/usr/lib/tmpfiles.d/systemd.conf:19] Unknown user 'systemd-network'. [/usr/lib/tmpfiles.d/systemd.conf:20] Unknown user 'systemd-network'. [/usr/lib/tmpfiles.d/systemd.conf:21] Unknown user 'systemd-network'. [/usr/lib/tmpfiles.d/systemd.conf:25] Unknown group 'systemd-journal'. [/usr/lib/tmpfiles.d/systemd.conf:26] Unknown group 'systemd-journal'. [ 1.650422] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 1.655216] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 [ 1.694118] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.696802] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 1.698009] FDC 0 is a S82078B [ 1.710807] AES CTR mode by8 optimization enabled [ 1.724293] ppdev: user-space parallel port driver [ 1.732252] Error: Driver 'pcspkr' is already registered, aborting... [ 1.734673] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 1.746232] EDAC MC: Ver: 3.0.0 [ 1.749324] EDAC sbridge: Ver: 1.1.1 [ 25.658309] device-mapper: uevent: version 1.0.3 [ 25.659092] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel(a)redhat.com [ 57.8] Inspecting the overlay [ 51.302190] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 58.667082] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 61.147593] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 63.977572] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 75.614795] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 80.782266] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 98.734329] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 102.090148] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 105.057661] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 108.085788] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 111.328257] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 112.201934] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 112.212101] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 112.221689] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 112.233016] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) [ 112.971075] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 113.788961] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 113.799156] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 113.811402] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 113.823347] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null) [ 115.345857] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null) [ 115.356280] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) [ 476.5] Checking for sufficient free disk space in the guest [ 476.5] Estimating space required on target for each disk [ 476.5] Converting Red Hat Enterprise Linux Server 7.4 (Maipo) to run on KVM [ 1072.265252] dracut[1565] No '/dev/log' or 'logger' included for syslog logging [ 1076.444899] dracut[1565] Executing: /sbin/dracut --verbose --add-drivers "virtio virtio_ring virtio_blk virtio_scsi virtio_net virtio_pci" /boot/initramfs-3.10.0-693.el7.x86_64.img 3.10.0-693.el7.x86_64 [ 1104.118050] dracut[1565] dracut module 'busybox' will not be installed, because command 'busybox' could not be found! [ 1111.893587] dracut[1565] dracut module 'crypt' will not be installed, because command 'cryptsetup' could not be found! [ 1112.694542] dracut[1565] dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found! [ 1117.763735] dracut[1565] dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found! [ 1117.769004] dracut[1565] dracut module 'multipath' will not be installed, because command 'multipath' could not be found! [ 1122.366992] dracut[1565] dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found! [ 1122.387968] dracut[1565] dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found! [ 1122.390569] dracut[1565] dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found! [ 1140.889553] dracut[1565] dracut module 'busybox' will not be installed, because command 'busybox' could not be found! [ 1140.910458] dracut[1565] dracut module 'crypt' will not be installed, because command 'cryptsetup' could not be found! [ 1140.915646] dracut[1565] dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found! [ 1140.924489] dracut[1565] dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found! [ 1140.928995] dracut[1565] dracut module 'multipath' will not be installed, because command 'multipath' could not be found! [ 1140.939832] dracut[1565] dracut module 'cifs' will not be installed, because command 'mount.cifs' could not be found! [ 1140.954810] dracut[1565] dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found! [ 1140.957229] dracut[1565] dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found! [ 1142.066303] dracut[1565] *** Including module: bash *** [ 1142.073837] dracut[1565] *** Including module: nss-softokn *** [ 1143.838047] dracut[1565] *** Including module: i18n *** [ 1230.935044] dracut[1565] *** Including module: network *** [ 1323.749409] dracut[1565] *** Including module: ifcfg *** [ 1323.755682] dracut[1565] *** Including module: drm *** [ 1340.716219] dracut[1565] *** Including module: plymouth *** [ 1359.941093] dracut[1565] *** Including module: dm *** [ 1366.392221] dracut[1565] Skipping udev rule: 64-device-mapper.rules [ 1366.394670] dracut[1565] Skipping udev rule: 60-persistent-storage-dm.rules [ 1366.397021] dracut[1565] Skipping udev rule: 55-dm.rules [ 1375.796931] dracut[1565] *** Including module: kernel-modules *** [ 1627.998656] dracut[1565] *** Including module: lvm *** [ 1631.138460] dracut[1565] Skipping udev rule: 64-device-mapper.rules [ 1631.141015] dracut[1565] Skipping udev rule: 56-lvm.rules [ 1631.143409] dracut[1565] Skipping udev rule: 60-persistent-storage-lvm.rules [ 1635.270706] dracut[1565] *** Including module: qemu *** [ 1635.277842] dracut[1565] *** Including module: rootfs-block *** [ 1636.845616] dracut[1565] *** Including module: terminfo *** [ 1639.189294] dracut[1565] *** Including module: udev-rules *** [ 1640.076624] dracut[1565] Skipping udev rule: 40-redhat-cpu-hotplug.rules [ 1649.962889] dracut[1565] Skipping udev rule: 91-permissions.rules [ 1651.008527] dracut[1565] *** Including module: biosdevname *** [ 1651.921630] dracut[1565] *** Including module: systemd *** [ 1685.124521] dracut[1565] *** Including module: usrmount *** [ 1685.128532] dracut[1565] *** Including module: base *** [ 1694.743507] dracut[1565] *** Including module: fs-lib *** [ 1696.295216] dracut[1565] *** Including module: shutdown *** [ 1698.578228] dracut[1565] *** Including modules done *** [ 1699.586287] dracut[1565] *** Installing kernel module dependencies and firmware *** [ 1717.505952] dracut[1565] *** Installing kernel module dependencies and firmware done *** [ 1724.539224] dracut[1565] *** Resolving executable dependencies *** [ 1844.709874] dracut[1565] *** Resolving executable dependencies done*** [ 1844.723313] dracut[1565] *** Hardlinking files *** [ 1847.281611] dracut[1565] *** Hardlinking files done *** [ 1847.284119] dracut[1565] *** Stripping files *** [ 1908.635888] dracut[1565] *** Stripping files done *** [ 1908.638262] dracut[1565] *** Generating early-microcode cpio image contents *** [ 1908.645054] dracut[1565] *** Constructing GenuineIntel.bin **** [ 1909.567397] dracut[1565] *** Store current command line parameters *** [ 1909.571686] dracut[1565] *** Creating image file *** [ 1909.574239] dracut[1565] *** Creating microcode section *** [ 1911.789907] dracut[1565] *** Created microcode section *** [ 1921.680575] dracut[1565] *** Creating image file done *** [ 1926.764407] dracut[1565] *** Creating initramfs image file '/boot/initramfs-3.10.0-693.el7.x86_64.img' done *** [1994.1] Mapping filesystem data to avoid copying unused and blank areas [ 1984.841231] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: discard [ 1987.252106] EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: discard [ 1990.531305] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard [ 1992.903109] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard [ 1995.876230] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard [ 1995.986384] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: discard [ 1997.748087] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: discard [ 1997.785914] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: discard [ 1997.824003] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: discard [ 2000.172658] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard [ 2001.214202] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard [2010.7] Closing the overlay [2010.7] Checking if the guest needs BIOS or UEFI to boot [2010.7] Assigning disks to buses [2010.7] Copying disk 1/1 to /rhev/data-center/e8263fb4-114d-4706-b1c0-5defcd15d16b/a118578a-4cf2-4e0c-ac47-20e9f0321da1/images/1a93e503-ce57-4631-8dd2-eeeae45866ca/88d92582-0f53-43b0-89ff-af1c17ea8618 (raw) [7000.4] Creating output metadata [7000.4] Finishing off Any help is appreciated. Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com&gt;