Hey Punit,
In the logs you've provided, GlusterD appears to be running correctly.
Could you provide the logs for the time period when GlusterD attempts to
start but fails.
~kaushal
On Dec 2, 2014 8:03 PM, "Punit Dambiwal" <hypunit(a)gmail.com> wrote:
Hi Kaushal,
Please find the logs here :-
http://ur1.ca/iyhs5 and
http://ur1.ca/iyhue
Thanks,
punit
On Tue, Dec 2, 2014 at 12:00 PM, Kaushal M <kshlmster(a)gmail.com> wrote:
> Hey Punit,
> Could you start Glusterd in debug mode and provide the logs here?
> To start it in debug mode, append '-LDEBUG' to the ExecStart line in
> the service file.
>
> ~kaushal
>
> On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal <hypunit(a)gmail.com> wrote:
> > Hi,
> >
> > Can Any body help me on this ??
> >
> > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypunit(a)gmail.com>
> wrote:
> >>
> >> Hi Kaushal,
> >>
> >> Thanks for the detailed reply....let me explain my setup first :-
> >>
> >> 1. Ovirt Engine
> >> 2. 4* host as well as storage machine (Host and gluster combined)
> >> 3. Every host has 24 bricks...
> >>
> >> Now whenever the host machine reboot...it can come up but can not join
> the
> >> cluster again and through the following error "Gluster command
> [<UNKNOWN>]
> >> failed on server.."
> >>
> >> Please check my comment in line :-
> >>
> >> 1. Use the same string for doing the peer probe and for the brick
> address
> >> during volume create/add-brick. Ideally, we suggest you use properly
> >> resolvable FQDNs everywhere. If that is not possible, then use only IP
> >> addresses. Try to avoid short names.
> >> ---------------
> >> [root@cpu05 ~]# gluster peer status
> >> Number of Peers: 3
> >>
> >> Hostname:
cpu03.stack.com
> >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb
> >> State: Peer in Cluster (Connected)
> >>
> >> Hostname:
cpu04.stack.com
> >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0
> >> State: Peer in Cluster (Connected)
> >> Other names:
> >> 10.10.0.8
> >>
> >> Hostname:
cpu02.stack.com
> >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25
> >> State: Peer in Cluster (Connected)
> >> [root@cpu05 ~]#
> >> ----------------
> >> 2. During boot up, make sure to launch glusterd only after the network
> is
> >> up. This will allow the new peer identification mechanism to do its
> >> job correctly.
> >> >> I think the service itself doing the same job....
> >>
> >> [root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service
> >> [Unit]
> >> Description=GlusterFS, a clustered file-system server
> >> After=network.target rpcbind.service
> >> Before=network-online.target
> >>
> >> [Service]
> >> Type=forking
> >> PIDFile=/var/run/glusterd.pid
> >> LimitNOFILE=65536
> >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid
> >> KillMode=process
> >>
> >> [Install]
> >> WantedBy=multi-user.target
> >> [root@cpu05 ~]#
> >> --------------------
> >>
> >> gluster logs :-
> >>
> >> [2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main]
> >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1
> >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid)
> >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management:
> >> Maximum allowed open file descriptors set to 65536
> >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management:
> Using
> >> /var/lib/glusterd as working directory
> >> [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create]
> >> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such
> device)
> >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management:
> >> Failed to initialize IB Device
> >> [2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load]
> >> 0-rpc-transport: 'rdma' initialization failed
> >> [2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create]
> >> 0-rpc-service: cannot create listener, initing the transport failed
> >> [2014-11-24 09:22:22.156290] I
> >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd:
> geo-replication
> >> module not installed in the system
> >> [2014-11-24 09:22:22.161318] I
> >> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd:
> retrieved
> >> op-version: 30600
> >> [2014-11-24 09:22:22.821800] I
> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
> 0-management:
> >> connect returned 0
> >> [2014-11-24 09:22:22.825810] I
> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
> 0-management:
> >> connect returned 0
> >> [2014-11-24 09:22:22.828705] I
> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo]
> 0-management:
> >> connect returned 0
> >> [2014-11-24 09:22:22.828771] I
> [rpc-clnt.c:969:rpc_clnt_connection_init]
> >> 0-management: setting frame-timeout to 600
> >> [2014-11-24 09:22:22.832670] I
> [rpc-clnt.c:969:rpc_clnt_connection_init]
> >> 0-management: setting frame-timeout to 600
> >> [2014-11-24 09:22:22.835919] I
> [rpc-clnt.c:969:rpc_clnt_connection_init]
> >> 0-management: setting frame-timeout to 600
> >> [2014-11-24 09:22:22.840209] E
> >> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve
> >> brick failed in restore
> >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management:
> >> Initialization of volume 'management' failed, review your volfile
again
> >> [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init]
> >> 0-management: initializing translator failed
> >> [2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate]
> >> 0-graph: init failed
> >> [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit]
> (-->
> >> 0-: received signum (0), shutting down
> >>
> >> Thanks,
> >> Punit
> >>
> >>
> >>
> >>
> >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlmster(a)gmail.com>
> wrote:
> >>>
> >>> Based on the logs I can guess that glusterd is being started before
> >>> the network has come up and that the addresses given to bricks do not
> >>> directly match the addresses used in during peer probe.
> >>>
> >>> The gluster_after_reboot log has the line "[2014-11-25
> >>> 06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks]
> >>> 0-glusterd: resolve brick failed in restore".
> >>>
> >>> Brick resolution fails when glusterd cannot match the address for the
> >>> brick, with one of the peers. Brick resolution happens in two phases,
> >>> 1. We first try to identify the peer by performing string comparisions
> >>> with the brick address and the peer addresses (The peer names will be
> >>> the names/addresses that were given when the peer was probed).
> >>> 2. If we don't find a match from step 1, we will then resolve all
the
> >>> brick address and the peer addresses into addrinfo structs, and then
> >>> compare these structs to find a match. This process should generally
> >>> find a match if available. This will fail only if the network is not
> >>> up yet as we cannot resolve addresses.
> >>>
> >>> The above steps are applicable only to glusterfs versions >=3.6.
They
> >>> were introduced to reduce problems with peer identification, like the
> >>> one you encountered
> >>>
> >>> Since both of the steps failed to find a match in one run, but
> >>> succeeded later, we can come to the conclusion that,
> >>> a) the bricks don't have the exact same string used in peer probe
for
> >>> their addresses as step 1 failed, and
> >>> b) the network was not up in the initial run, as step 2 failed during
> >>> the initial run, but passed in the second run.
> >>>
> >>> Please let me know if my conclusion is correct.
> >>>
> >>> If it is, you can solve your problem in two ways.
> >>> 1. Use the same string for doing the peer probe and for the brick
> >>> address during volume create/add-brick. Ideally, we suggest you use
> >>> properly resolvable FQDNs everywhere. If that is not possible, then
> >>> use only IP addresses. Try to avoid short names.
> >>> 2. During boot up, make sure to launch glusterd only after the network
> >>> is up. This will allow the new peer identification mechanism to do its
> >>> job correctly.
> >>>
> >>>
> >>> If you have already followed these steps and yet still hit the
> >>> problem, then please provide more information (setup, logs, etc.). It
> >>> could be much different problem that you are facing.
> >>>
> >>> ~kaushal
> >>>
> >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal
<hypunit(a)gmail.com>
> >>> wrote:
> >>> > Is there any one can help on this ??
> >>> >
> >>> > Thanks,
> >>> > punit
> >>> >
> >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal
<hypunit(a)gmail.com>
> >>> > wrote:
> >>> >>
> >>> >> Hi,
> >>> >>
> >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7
> >>> >>
> >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy
> >>> >> <kmayilsa(a)redhat.com>
> >>> >> wrote:
> >>> >>>
> >>> >>> [+Gluster-users(a)gluster.org]
> >>> >>>
> >>> >>> "Initialization of volume 'management' failed,
review your volfile
> >>> >>> again", glusterd throws this error when the service is
started
> >>> >>> automatically
> >>> >>> after the reboot. But the service is successfully started
later
> >>> >>> manually by
> >>> >>> the user.
> >>> >>>
> >>> >>> can somebody from gluster-users please help on this?
> >>> >>>
> >>> >>> glusterfs version: 3.5.1
> >>> >>>
> >>> >>> Thanks,
> >>> >>> Kanagaraj
> >>> >>>
> >>> >>> ----- Original Message -----
> >>> >>> > From: "Punit Dambiwal"
<hypunit(a)gmail.com>
> >>> >>> > To: "Kanagaraj" <kmayilsa(a)redhat.com>
> >>> >>> > Cc: users(a)ovirt.org
> >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM
> >>> >>> > Subject: Re: [ovirt-users] Gluster command
[<UNKNOWN>] failed on
> >>> >>> > server...
> >>> >>> >
> >>> >>> > Hi Kanagraj,
> >>> >>> >
> >>> >>> > Please check the attached log files....i didn't
find any thing
> >>> >>> > special....
> >>> >>> >
> >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <
> kmayilsa(a)redhat.com>
> >>> >>> > wrote:
> >>> >>> >
> >>> >>> > > Do you see any errors in
> >>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log
or vdsm.log
> >>> >>> > > when
> >>> >>> > > the
> >>> >>> > > service is trying to start automatically after
the reboot?
> >>> >>> > >
> >>> >>> > > Thanks,
> >>> >>> > > Kanagaraj
> >>> >>> > >
> >>> >>> > >
> >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote:
> >>> >>> > >
> >>> >>> > > Hi Kanagaraj,
> >>> >>> > >
> >>> >>> > > Yes...once i will start the gluster service and
then vdsmd
> >>> >>> > > ...the
> >>> >>> > > host
> >>> >>> > > can connect to cluster...but the question is why
it's not
> started
> >>> >>> > > even it
> >>> >>> > > has chkconfig enabled...
> >>> >>> > >
> >>> >>> > > I have tested it in two host cluster
environment...(Centos
> 6.6
> >>> >>> > > and
> >>> >>> > > centos 7.0) on both hypervisior cluster..it's
failed to
> reconnect
> >>> >>> > > in
> >>> >>> > > to
> >>> >>> > > cluster after reboot....
> >>> >>> > >
> >>> >>> > > In both the environment glusterd enabled for
next boot....but
> >>> >>> > > it's
> >>> >>> > > failed with the same error....seems it's bug
in either
> gluster or
> >>> >>> > > Ovirt ??
> >>> >>> > >
> >>> >>> > > Please help me to find the workaround here if
can not resolve
> >>> >>> > > it...as
> >>> >>> > > without this the Host machine can not connect
after
> >>> >>> > > reboot....that
> >>> >>> > > means
> >>> >>> > > engine will consider it as down and every time
need to
> manually
> >>> >>> > > start
> >>> >>> > > the
> >>> >>> > > gluster service and vdsmd... ??
> >>> >>> > >
> >>> >>> > > Thanks,
> >>> >>> > > Punit
> >>> >>> > >
> >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <
> kmayilsa(a)redhat.com>
> >>> >>> > > wrote:
> >>> >>> > >
> >>> >>> > >> From vdsm.log "error: Connection
failed. Please check if
> >>> >>> > >> gluster
> >>> >>> > >> daemon
> >>> >>> > >> is operational."
> >>> >>> > >>
> >>> >>> > >> Starting glusterd service should fix this
issue. 'service
> >>> >>> > >> glusterd
> >>> >>> > >> start'
> >>> >>> > >> But i am wondering why the glusterd was not
started
> >>> >>> > >> automatically
> >>> >>> > >> after
> >>> >>> > >> the reboot.
> >>> >>> > >>
> >>> >>> > >> Thanks,
> >>> >>> > >> Kanagaraj
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal
wrote:
> >>> >>> > >>
> >>> >>> > >> Hi Kanagaraj,
> >>> >>> > >>
> >>> >>> > >> Please find the attached VDSM logs :-
> >>> >>> > >>
> >>> >>> > >> ----------------
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
> >>> >>> > >> Owner.cancelAll requests {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:17,182::task::993::Storage.TaskManager.Task::(_decref)
> >>> >>> > >>
Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting
> >>> >>> > >> False
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >>
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from
> state
> >>> >>> > >> init
> >>> >>> > >> ->
> >>> >>> > >> state preparing
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >>
21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats(options=None)
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >>
21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats, Return response: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare)
> >>> >>> > >>
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >>
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from
> state
> >>> >>> > >> preparing
> >>> >>> > >> ->
> >>> >>> > >> state finished
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
> >>> >>> > >> Owner.releaseAll requests {} resources {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
> >>> >>> > >> Owner.cancelAll requests {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:32,394::task::993::Storage.TaskManager.Task::(_decref)
> >>> >>> > >>
Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting
> >>> >>> > >> False
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client
> >>> >>> > >> [10.10.10.2]::call
> >>> >>> > >> getCapabilities with () {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd)
> >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all
(cwd None)
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd)
> >>> >>> > >> SUCCESS: <err> = ''; <rc>
= 0
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,588::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,592::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-object',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,593::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-plugin',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-account',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-proxy',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,598::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-doc',) not found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('gluster-swift-container',) not
found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,599::caps::728::root::(_getKeyPackages) rpm package
> >>> >>> > >> ('glusterfs-geo-replication',) not
found
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >> 21:41:41,600::caps::646::root::(get)
> >>> >>> > >> VirtioRNG DISABLED: libvirt version
0.10.2-29.el6_5.9
> required
> >>> >>> > >> >=
> >>> >>> > >> 0.10.2-31
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return
> >>> >>> > >> getCapabilities
> >>> >>> > >> with {'status': {'message':
'Done', 'code': 0}, 'info':
> >>> >>> > >> {'HBAInventory':
> >>> >>> > >> {'iSCSI': [{'InitiatorName':
> >>> >>> > >>
'iqn.1994-05.com.redhat:32151ce183c8'}],
> >>> >>> > >> 'FC':
> >>> >>> > >> []}, 'packages2': {'kernel':
{'release': '431.el6.x86_64',
> >>> >>> > >> 'buildtime':
> >>> >>> > >> 1385061309.0, 'version':
'2.6.32'}, 'glusterfs-rdma':
> >>> >>> > >> {'release':
> >>> >>> > >> '1.el6',
> >>> >>> > >> 'buildtime': 1403622628L,
'version': '3.5.1'},
> 'glusterfs-fuse':
> >>> >>> > >> {'release': '1.el6',
'buildtime': 1403622628L, 'version':
> >>> >>> > >> '3.5.1'},
> >>> >>> > >> 'spice-server': {'release':
'6.el6_5.2', 'buildtime':
> >>> >>> > >> 1402324637L,
> >>> >>> > >> 'version': '0.12.4'},
'vdsm': {'release': '1.gitdb83943.el6',
> >>> >>> > >> 'buildtime':
> >>> >>> > >> 1412784567L, 'version':
'4.16.7'}, 'qemu-kvm': {'release':
> >>> >>> > >> '2.415.el6_5.10',
'buildtime': 1402435700L, 'version':
> >>> >>> > >> '0.12.1.2'},
> >>> >>> > >> 'qemu-img': {'release':
'2.415.el6_5.10', 'buildtime':
> >>> >>> > >> 1402435700L,
> >>> >>> > >> 'version': '0.12.1.2'},
'libvirt': {'release': '29.el6_5.9',
> >>> >>> > >> 'buildtime':
> >>> >>> > >> 1402404612L, 'version':
'0.10.2'}, 'glusterfs': {'release':
> >>> >>> > >> '1.el6',
> >>> >>> > >> 'buildtime': 1403622628L,
'version': '3.5.1'}, 'mom':
> >>> >>> > >> {'release':
> >>> >>> > >> '2.el6',
> >>> >>> > >> 'buildtime': 1403794344L,
'version': '0.4.1'},
> >>> >>> > >> 'glusterfs-server':
> >>> >>> > >> {'release': '1.el6',
'buildtime': 1403622628L, 'version':
> >>> >>> > >> '3.5.1'}},
> >>> >>> > >> 'numaNodeDistance': {'1':
[20, 10], '0': [10, 20]},
> 'cpuModel':
> >>> >>> > >> 'Intel(R)
> >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz',
'liveMerge':
> 'false',
> >>> >>> > >> 'hooks':
> >>> >>> > >> {},
> >>> >>> > >> 'cpuSockets': '2',
'vmTypes': ['kvm'], 'selinux': {'mode':
> '1'},
> >>> >>> > >> 'kdumpStatus': 0,
'supportedProtocols': ['2.2', '2.3'],
> >>> >>> > >> 'networks':
> >>> >>> > >> {'ovirtmgmt': {'iface':
u'bond0.10', 'addr': '43.252.176.16',
> >>> >>> > >> 'bridged':
> >>> >>> > >> False, 'ipv6addrs':
['fe80::62eb:69ff:fe20:b46c/64'], 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'bootproto4': 'none',
'netmask': '255.255.255.0',
> 'ipv4addrs':
> >>> >>> > >> ['
> >>> >>> > >> 43.252.176.16/24'
<
http://43.252.176.16/24%27>],
> 'interface':
> >>> >>> > >> u'bond0.10', 'ipv6gateway':
'::', 'gateway': '43.25.17.1'},
> >>> >>> > >> 'Internal':
> >>> >>> > >> {'iface': 'Internal',
'addr': '', 'cfg': {'DEFROUTE': 'no',
> >>> >>> > >> 'HOTPLUG':
> >>> >>> > >> 'no', 'MTU': '9000',
'DELAY': '0', 'NM_CONTROLLED': 'no',
> >>> >>> > >> 'BOOTPROTO':
> >>> >>> > >> 'none', 'STP': 'off',
'DEVICE': 'Internal', 'TYPE': 'Bridge',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'no'}, 'bridged': True,
'ipv6addrs':
> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
> >>> >>> > >> 'gateway': '',
'bootproto4': 'none', 'netmask': '', 'stp':
> >>> >>> > >> 'off',
> >>> >>> > >> 'ipv4addrs': [], 'mtu':
'9000', 'ipv6gateway': '::', 'ports':
> >>> >>> > >> ['bond1.100']}, 'storage':
{'iface': u'bond1', 'addr':
> >>> >>> > >> '10.10.10.6',
> >>> >>> > >> 'bridged': False,
'ipv6addrs':
> ['fe80::210:18ff:fecd:daac/64'],
> >>> >>> > >> 'mtu':
> >>> >>> > >> '9000', 'bootproto4':
'none', 'netmask': '255.255.255.0',
> >>> >>> > >> 'ipv4addrs': ['
> >>> >>> > >> 10.10.10.6/24'
<
http://10.10.10.6/24%27>], 'interface':
> >>> >>> > >> u'bond1',
> >>> >>> > >> 'ipv6gateway': '::',
'gateway': ''}, 'VMNetwork': {'iface':
> >>> >>> > >> 'VMNetwork',
> >>> >>> > >> 'addr': '', 'cfg':
{'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU':
> >>> >>> > >> '1500',
> >>> >>> > >> 'DELAY': '0',
'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none',
> 'STP':
> >>> >>> > >> 'off',
> >>> >>> > >> 'DEVICE': 'VMNetwork',
'TYPE': 'Bridge', 'ONBOOT': 'no'},
> >>> >>> > >> 'bridged':
> >>> >>> > >> True,
> >>> >>> > >> 'ipv6addrs':
['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '',
> >>> >>> > >> 'bootproto4':
> >>> >>> > >> 'none', 'netmask':
'', 'stp': 'off', 'ipv4addrs': [], 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'ipv6gateway': '::',
'ports': ['bond0.36']}}, 'bridges':
> >>> >>> > >> {'Internal':
> >>> >>> > >> {'addr': '', 'cfg':
{'DEFROUTE': 'no', 'HOTPLUG': 'no',
> 'MTU':
> >>> >>> > >> '9000',
> >>> >>> > >> 'DELAY': '0',
'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none',
> 'STP':
> >>> >>> > >> 'off',
> >>> >>> > >> 'DEVICE': 'Internal',
'TYPE': 'Bridge', 'ONBOOT': 'no'},
> >>> >>> > >> 'ipv6addrs':
> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'],
'mtu': '9000', 'netmask':
> '',
> >>> >>> > >> 'stp':
> >>> >>> > >> 'off', 'ipv4addrs': [],
'ipv6gateway': '::', 'gateway': '',
> >>> >>> > >> 'opts':
> >>> >>> > >> {'topology_change_detected':
'0',
> 'multicast_last_member_count':
> >>> >>> > >> '2',
> >>> >>> > >> 'hash_elasticity': '4',
'multicast_query_response_interval':
> >>> >>> > >> '999',
> >>> >>> > >> 'multicast_snooping': '1',
> 'multicast_startup_query_interval':
> >>> >>> > >> '3124',
> >>> >>> > >> 'hello_timer': '31',
'multicast_querier_interval': '25496',
> >>> >>> > >> 'max_age':
> >>> >>> > >> '1999', 'hash_max':
'512', 'stp_state': '0', 'root_id':
> >>> >>> > >> '8000.001018cddaac',
'priority': '32768',
> >>> >>> > >> 'multicast_membership_interval':
> >>> >>> > >> '25996', 'root_path_cost':
'0', 'root_port': '0',
> >>> >>> > >> 'multicast_querier':
> >>> >>> > >> '0',
> >>> >>> > >> 'multicast_startup_query_count':
'2', 'hello_time': '199',
> >>> >>> > >> 'topology_change': '0',
'bridge_id': '8000.001018cddaac',
> >>> >>> > >> 'topology_change_timer': '0',
'ageing_time': '29995',
> >>> >>> > >> 'gc_timer':
> >>> >>> > >> '31',
> >>> >>> > >> 'group_addr':
'1:80:c2:0:0:0', 'tcn_timer': '0',
> >>> >>> > >> 'multicast_query_interval':
'12498',
> >>> >>> > >> 'multicast_last_member_interval':
> >>> >>> > >> '99', 'multicast_router':
'1', 'forward_delay': '0'},
> 'ports':
> >>> >>> > >> ['bond1.100']}, 'VMNetwork':
{'addr': '', 'cfg': {'DEFROUTE':
> >>> >>> > >> 'no',
> >>> >>> > >> 'HOTPLUG': 'no',
'MTU': '1500', 'DELAY': '0',
> 'NM_CONTROLLED':
> >>> >>> > >> 'no',
> >>> >>> > >> 'BOOTPROTO': 'none',
'STP': 'off', 'DEVICE': 'VMNetwork',
> >>> >>> > >> 'TYPE':
> >>> >>> > >> 'Bridge',
> >>> >>> > >> 'ONBOOT': 'no'},
'ipv6addrs':
> ['fe80::62eb:69ff:fe20:b46c/64'],
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500', 'netmask':
'', 'stp': 'off', 'ipv4addrs': [],
> >>> >>> > >> 'ipv6gateway':
> >>> >>> > >> '::',
> >>> >>> > >> 'gateway': '',
'opts': {'topology_change_detected': '0',
> >>> >>> > >> 'multicast_last_member_count':
'2', 'hash_elasticity': '4',
> >>> >>> > >> 'multicast_query_response_interval':
'999',
> >>> >>> > >> 'multicast_snooping':
> >>> >>> > >> '1',
> >>> >>> > >> 'multicast_startup_query_interval':
'3124', 'hello_timer':
> >>> >>> > >> '131',
> >>> >>> > >> 'multicast_querier_interval':
'25496', 'max_age': '1999',
> >>> >>> > >> 'hash_max':
> >>> >>> > >> '512', 'stp_state':
'0', 'root_id': '8000.60eb6920b46c',
> >>> >>> > >> 'priority':
> >>> >>> > >> '32768',
'multicast_membership_interval': '25996',
> >>> >>> > >> 'root_path_cost':
> >>> >>> > >> '0',
> >>> >>> > >> 'root_port': '0',
'multicast_querier': '0',
> >>> >>> > >> 'multicast_startup_query_count':
'2', 'hello_time': '199',
> >>> >>> > >> 'topology_change': '0',
'bridge_id': '8000.60eb6920b46c',
> >>> >>> > >> 'topology_change_timer': '0',
'ageing_time': '29995',
> >>> >>> > >> 'gc_timer':
> >>> >>> > >> '31',
> >>> >>> > >> 'group_addr':
'1:80:c2:0:0:0', 'tcn_timer': '0',
> >>> >>> > >> 'multicast_query_interval':
'12498',
> >>> >>> > >> 'multicast_last_member_interval':
> >>> >>> > >> '99', 'multicast_router':
'1', 'forward_delay': '0'},
> 'ports':
> >>> >>> > >> ['bond0.36']}}, 'uuid':
> '44454C4C-4C00-1057-8053-B7C04F504E31',
> >>> >>> > >> 'lastClientIface': 'bond1',
'nics': {'eth3': {'permhwaddr':
> >>> >>> > >> '00:10:18:cd:da:ae', 'addr':
'', 'cfg': {'SLAVE': 'yes',
> >>> >>> > >> 'NM_CONTROLLED':
> >>> >>> > >> 'no', 'MTU': '9000',
'HWADDR': '00:10:18:cd:da:ae', 'MASTER':
> >>> >>> > >> 'bond1',
> >>> >>> > >> 'DEVICE': 'eth3',
'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu':
> >>> >>> > >> '9000',
> >>> >>> > >> 'netmask': '',
'ipv4addrs': [], 'hwaddr':
> '00:10:18:cd:da:ac',
> >>> >>> > >> 'speed':
> >>> >>> > >> 1000}, 'eth2': {'permhwaddr':
'00:10:18:cd:da:ac', 'addr':
> '',
> >>> >>> > >> 'cfg':
> >>> >>> > >> {'SLAVE': 'yes',
'NM_CONTROLLED': 'no', 'MTU': '9000',
> 'HWADDR':
> >>> >>> > >> '00:10:18:cd:da:ac',
'MASTER': 'bond1', 'DEVICE': 'eth2',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'no'},
> >>> >>> > >> 'ipv6addrs': [], 'mtu':
'9000', 'netmask': '', 'ipv4addrs':
> [],
> >>> >>> > >> 'hwaddr':
> >>> >>> > >> '00:10:18:cd:da:ac', 'speed':
1000}, 'eth1': {'permhwaddr':
> >>> >>> > >> '60:eb:69:20:b4:6d', 'addr':
'', 'cfg': {'SLAVE': 'yes',
> >>> >>> > >> 'NM_CONTROLLED':
> >>> >>> > >> 'no', 'MTU': '1500',
'HWADDR': '60:eb:69:20:b4:6d', 'MASTER':
> >>> >>> > >> 'bond0',
> >>> >>> > >> 'DEVICE': 'eth1',
'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'netmask': '',
'ipv4addrs': [], 'hwaddr':
> '60:eb:69:20:b4:6c',
> >>> >>> > >> 'speed':
> >>> >>> > >> 1000}, 'eth0': {'permhwaddr':
'60:eb:69:20:b4:6c', 'addr':
> '',
> >>> >>> > >> 'cfg':
> >>> >>> > >> {'SLAVE': 'yes',
'NM_CONTROLLED': 'no', 'MTU': '1500',
> 'HWADDR':
> >>> >>> > >> '60:eb:69:20:b4:6c',
'MASTER': 'bond0', 'DEVICE': 'eth0',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'yes'},
> >>> >>> > >> 'ipv6addrs': [], 'mtu':
'1500', 'netmask': '', 'ipv4addrs':
> [],
> >>> >>> > >> 'hwaddr':
> >>> >>> > >> '60:eb:69:20:b4:6c', 'speed':
1000}}, 'software_revision':
> '1',
> >>> >>> > >> 'clusterLevels': ['3.0',
'3.1', '3.2', '3.3', '3.4', '3.5'],
> >>> >>> > >> 'cpuFlags':
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
>
u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270',
> >>> >>> > >> 'ISCSIInitiatorName':
'iqn.1994-05.com.redhat:32151ce183c8',
> >>> >>> > >> 'netConfigDirty': 'False',
'supportedENGINEs': ['3.0', '3.1',
> >>> >>> > >> '3.2',
> >>> >>> > >> '3.3',
> >>> >>> > >> '3.4', '3.5'],
'autoNumaBalancing': 2, 'reservedMem': '321',
> >>> >>> > >> 'bondings':
> >>> >>> > >> {'bond4': {'addr':
'', 'cfg': {}, 'mtu': '1500', 'netmask':
> '',
> >>> >>> > >> 'slaves':
> >>> >>> > >> [], 'hwaddr':
'00:00:00:00:00:00'}, 'bond0': {'addr': '',
> 'cfg':
> >>> >>> > >> {'HOTPLUG': 'no',
'MTU': '1500', 'NM_CONTROLLED': 'no',
> >>> >>> > >> 'BONDING_OPTS':
> >>> >>> > >> 'mode=4 miimon=100',
'DEVICE': 'bond0', 'ONBOOT': 'yes'},
> >>> >>> > >> 'ipv6addrs':
> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'],
'mtu': '1500', 'netmask':
> '',
> >>> >>> > >> 'ipv4addrs': [], 'hwaddr':
'60:eb:69:20:b4:6c', 'slaves':
> >>> >>> > >> ['eth0',
> >>> >>> > >> 'eth1'],
> >>> >>> > >> 'opts': {'miimon':
'100', 'mode': '4'}}, 'bond1': {'addr':
> >>> >>> > >> '10.10.10.6',
> >>> >>> > >> 'cfg': {'DEFROUTE':
'no', 'IPADDR': '10.10.10.6', 'HOTPLUG':
> >>> >>> > >> 'no',
> >>> >>> > >> 'MTU':
> >>> >>> > >> '9000', 'NM_CONTROLLED':
'no', 'NETMASK': '255.255.255.0',
> >>> >>> > >> 'BOOTPROTO':
> >>> >>> > >> 'none', 'BONDING_OPTS':
'mode=4 miimon=100', 'DEVICE':
> 'bond1',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'no'}, 'ipv6addrs':
['fe80::210:18ff:fecd:daac/64'], 'mtu':
> >>> >>> > >> '9000',
> >>> >>> > >> 'netmask': '255.255.255.0',
'ipv4addrs': ['10.10.10.6/24'
> >>> >>> > >> <
http://10.10.10.6/24%27>],
'hwaddr': '00:10:18:cd:da:ac',
> >>> >>> > >> 'slaves':
> >>> >>> > >> ['eth2', 'eth3'],
'opts': {'miimon': '100', 'mode': '4'}},
> >>> >>> > >> 'bond2':
> >>> >>> > >> {'addr': '', 'cfg':
{}, 'mtu': '1500', 'netmask': '',
> 'slaves':
> >>> >>> > >> [],
> >>> >>> > >> 'hwaddr':
'00:00:00:00:00:00'}, 'bond3': {'addr': '',
'cfg':
> {},
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500', 'netmask':
'', 'slaves': [], 'hwaddr':
> >>> >>> > >> '00:00:00:00:00:00'}},
> >>> >>> > >> 'software_version': '4.16',
'memSize': '24019', 'cpuSpeed':
> >>> >>> > >> '2667.000',
> >>> >>> > >> 'numaNodes': {u'1':
{'totalMemory': '12288', 'cpus': [6, 7,
> 8,
> >>> >>> > >> 9,
> >>> >>> > >> 10, 11,
> >>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0':
{'totalMemory': '12278',
> 'cpus':
> >>> >>> > >> [0,
> >>> >>> > >> 1, 2,
> >>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}},
'version_name': 'Snow
> Man',
> >>> >>> > >> 'vlans':
> >>> >>> > >> {'bond0.10': {'iface':
'bond0', 'addr': '43.25.17.16', 'cfg':
> >>> >>> > >> {'DEFROUTE':
> >>> >>> > >> 'yes', 'VLAN': 'yes',
'IPADDR': '43.25.17.16', 'HOTPLUG':
> 'no',
> >>> >>> > >> 'GATEWAY':
> >>> >>> > >> '43.25.17.1',
'NM_CONTROLLED': 'no', 'NETMASK':
> '255.255.255.0',
> >>> >>> > >> 'BOOTPROTO': 'none',
'DEVICE': 'bond0.10', 'MTU': '1500',
> >>> >>> > >> 'ONBOOT':
> >>> >>> > >> 'yes'},
> >>> >>> > >> 'ipv6addrs':
['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10,
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'netmask': '255.255.255.0',
'ipv4addrs': ['43.25.17.16/24']
> >>> >>> > >> <
http://43.25.17.16/24%27%5D>},
'bond0.36': {'iface':
> 'bond0',
> >>> >>> > >> 'addr':
> >>> >>> > >> '', 'cfg': {'BRIDGE':
'VMNetwork', 'VLAN': 'yes', 'HOTPLUG':
> >>> >>> > >> 'no',
> >>> >>> > >> 'MTU':
> >>> >>> > >> '1500', 'NM_CONTROLLED':
'no', 'DEVICE': 'bond0.36',
> 'ONBOOT':
> >>> >>> > >> 'no'},
> >>> >>> > >> 'ipv6addrs':
['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36,
> >>> >>> > >> 'mtu':
> >>> >>> > >> '1500',
> >>> >>> > >> 'netmask': '',
'ipv4addrs': []}, 'bond1.100': {'iface':
> 'bond1',
> >>> >>> > >> 'addr':
> >>> >>> > >> '', 'cfg': {'BRIDGE':
'Internal', 'VLAN': 'yes', 'HOTPLUG':
> >>> >>> > >> 'no',
> >>> >>> > >> 'MTU':
> >>> >>> > >> '9000', 'NM_CONTROLLED':
'no', 'DEVICE': 'bond1.100',
> 'ONBOOT':
> >>> >>> > >> 'no'},
> >>> >>> > >> 'ipv6addrs':
['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100,
> >>> >>> > >> 'mtu':
> >>> >>> > >> '9000',
> >>> >>> > >> 'netmask': '',
'ipv4addrs': []}}, 'cpuCores': '12',
> >>> >>> > >> 'kvmEnabled':
> >>> >>> > >> 'true',
> >>> >>> > >> 'guestOverhead': '65',
'cpuThreads': '24',
> 'emulatedMachines':
> >>> >>> > >> [u'rhel6.5.0', u'pc',
u'rhel6.4.0', u'rhel6.3.0',
> u'rhel6.2.0',
> >>> >>> > >> u'rhel6.1.0', u'rhel6.0.0',
u'rhel5.5.0', u'rhel5.4.4',
> >>> >>> > >> u'rhel5.4.0'],
> >>> >>> > >> 'operatingSystem':
{'release': '5.el6.centos.11.1',
> 'version':
> >>> >>> > >> '6',
> >>> >>> > >> 'name':
> >>> >>> > >> 'RHEL'}, 'lastClient':
'10.10.10.2'}}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client
> >>> >>> > >> [10.10.10.2]::call
> >>> >>> > >> getHardwareInfo with () {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return
> >>> >>> > >> getHardwareInfo
> >>> >>> > >> with {'status': {'message':
'Done', 'code': 0}, 'info':
> >>> >>> > >> {'systemProductName':
'CS24-TY', 'systemSerialNumber':
> >>> >>> > >> '7LWSPN1',
> >>> >>> > >> 'systemFamily': 'Server',
'systemVersion': 'A00',
> 'systemUUID':
> >>> >>> > >>
'44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer':
> >>> >>> > >> 'Dell'}}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client
> >>> >>> > >> [10.10.10.2]::call
> >>> >>> > >> hostsList with () {} flowID [222e8036]
> >>> >>> > >> Thread-13::ERROR::2014-11-24
> >>> >>> > >>
21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm
> exception
> >>> >>> > >> occured
> >>> >>> > >> Traceback (most recent call last):
> >>> >>> > >> File
"/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in
> >>> >>> > >> wrapper
> >>> >>> > >> res = f(*args, **kwargs)
> >>> >>> > >> File
"/usr/share/vdsm/gluster/api.py", line 54, in wrapper
> >>> >>> > >> rv = func(*args, **kwargs)
> >>> >>> > >> File
"/usr/share/vdsm/gluster/api.py", line 251, in
> hostsList
> >>> >>> > >> return {'hosts':
self.svdsmProxy.glusterPeerStatus()}
> >>> >>> > >> File
"/usr/share/vdsm/supervdsm.py", line 50, in __call__
> >>> >>> > >> return callMethod()
> >>> >>> > >> File
"/usr/share/vdsm/supervdsm.py", line 48, in <lambda>
> >>> >>> > >> **kwargs)
> >>> >>> > >> File "<string>", line 2, in
glusterPeerStatus
> >>> >>> > >> File
"/usr/lib64/python2.6/multiprocessing/managers.py",
> line
> >>> >>> > >> 740,
> >>> >>> > >> in
> >>> >>> > >> _callmethod
> >>> >>> > >> raise convert_to_error(kind, result)
> >>> >>> > >> GlusterCmdExecFailedException: Command
execution failed
> >>> >>> > >> error: Connection failed. Please check if
gluster daemon is
> >>> >>> > >> operational.
> >>> >>> > >> return code: 1
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >>
Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from
> state
> >>> >>> > >> init
> >>> >>> > >> ->
> >>> >>> > >> state preparing
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >>
21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats(options=None)
> >>> >>> > >> Thread-13::INFO::2014-11-24
> >>> >>> > >>
21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and
> >>> >>> > >> protect:
> >>> >>> > >> repoStats, Return response: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare)
> >>> >>> > >>
Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState)
> >>> >>> > >>
Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from
> state
> >>> >>> > >> preparing
> >>> >>> > >> ->
> >>> >>> > >> state finished
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll)
> >>> >>> > >> Owner.releaseAll requests {} resources {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >>
> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll)
> >>> >>> > >> Owner.cancelAll requests {}
> >>> >>> > >> Thread-13::DEBUG::2014-11-24
> >>> >>> > >>
21:41:50,951::task::993::Storage.TaskManager.Task::(_decref)
> >>> >>> > >>
Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting
> >>> >>> > >> False
> >>> >>> > >> -------------------------------
> >>> >>> > >>
> >>> >>> > >> [root@compute4 ~]# service glusterd status
> >>> >>> > >> glusterd is stopped
> >>> >>> > >> [root@compute4 ~]# chkconfig --list | grep
glusterd
> >>> >>> > >> glusterd 0:off 1:off 2:on 3:on
4:on 5:on
> >>> >>> > >> 6:off
> >>> >>> > >> [root@compute4 ~]#
> >>> >>> > >>
> >>> >>> > >> Thanks,
> >>> >>> > >> Punit
> >>> >>> > >>
> >>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj
<
> kmayilsa(a)redhat.com>
> >>> >>> > >> wrote:
> >>> >>> > >>
> >>> >>> > >>> Can you send the corresponding error in
vdsm.log from the
> >>> >>> > >>> host?
> >>> >>> > >>>
> >>> >>> > >>> Also check if glusterd service is
running.
> >>> >>> > >>>
> >>> >>> > >>> Thanks,
> >>> >>> > >>> Kanagaraj
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal
wrote:
> >>> >>> > >>>
> >>> >>> > >>> Hi,
> >>> >>> > >>>
> >>> >>> > >>> After reboot my Hypervisior host can not
activate again in
> the
> >>> >>> > >>> cluster
> >>> >>> > >>> and failed with the following error :-
> >>> >>> > >>>
> >>> >>> > >>> Gluster command [<UNKNOWN>] failed
on server...
> >>> >>> > >>>
> >>> >>> > >>> Engine logs :-
> >>> >>> > >>>
> >>> >>> > >>> 2014-11-24 18:05:28,397 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64)
START,
> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName =
Compute4, HostId =
> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a),
log id: 5f251c90
> >>> >>> > >>> 2014-11-24 18:05:30,609 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64)
FINISH,
> >>> >>> > >>> GlusterVolumesListVDSCommand,
> >>> >>> > >>> return:
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
>
{26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0
> },
> >>> >>> > >>> log id: 5f251c90
> >>> >>> > >>> 2014-11-24 18:05:33,768 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (ajp--127.0.0.1-8702-8)
> >>> >>> > >>> [287d570d] Lock Acquired to object
EngineLock
> [exclusiveLocks=
> >>> >>> > >>> key:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a
value: VDS
> >>> >>> > >>> , sharedLocks= ]
> >>> >>> > >>> 2014-11-24 18:05:33,795 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
[287d570d] Running
> command:
> >>> >>> > >>> ActivateVdsCommand internal: false.
Entities affected : ID:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a
Type: VDSAction group
> >>> >>> > >>> MANIPULATE_HOST
> >>> >>> > >>> with role type ADMIN
> >>> >>> > >>> 2014-11-24 18:05:33,796 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
[287d570d] Before
> acquiring
> >>> >>> > >>> lock in
> >>> >>> > >>> order to prevent monitoring for host
Compute5 from
> data-center
> >>> >>> > >>> SV_WTC
> >>> >>> > >>> 2014-11-24 18:05:33,797 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
[287d570d] Lock
> acquired,
> >>> >>> > >>> from
> >>> >>> > >>> now a
> >>> >>> > >>> monitoring of host will be skipped for
host Compute5 from
> >>> >>> > >>> data-center
> >>> >>> > >>> SV_WTC
> >>> >>> > >>> 2014-11-24 18:05:33,817 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
[287d570d] START,
> >>> >>> > >>> SetVdsStatusVDSCommand(HostName =
Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
status=Unassigned,
> >>> >>> > >>> nonOperationalReason=NONE,
stopSpmFailureLogged=false), log
> id:
> >>> >>> > >>> 1cbc7311
> >>> >>> > >>> 2014-11-24 18:05:33,820 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
[287d570d] FINISH,
> >>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311
> >>> >>> > >>> 2014-11-24 18:05:34,086 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
Activate finished. Lock
> >>> >>> > >>> released.
> >>> >>> > >>> Monitoring can run now for host Compute5
from data-center
> >>> >>> > >>> SV_WTC
> >>> >>> > >>> 2014-11-24 18:05:34,088 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45)
Correlation ID:
> 287d570d,
> >>> >>> > >>> Job
> >>> >>> > >>> ID:
> >>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a,
Call Stack: null,
> Custom
> >>> >>> > >>> Event ID:
> >>> >>> > >>> -1, Message: Host Compute5 was activated
by admin.
> >>> >>> > >>> 2014-11-24 18:05:34,090 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.ActivateVdsCommand]
> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock
freed to object
> >>> >>> > >>> EngineLock
> >>> >>> > >>> [exclusiveLocks= key:
0bf6b00f-7947-4411-b55a-cc5eea2b381a
> >>> >>> > >>> value:
> >>> >>> > >>> VDS
> >>> >>> > >>> , sharedLocks= ]
> >>> >>> > >>> 2014-11-24 18:05:35,792 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55)
[3706e836] START,
> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName =
Compute4, HostId =
> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a),
log id: 48a0c832
> >>> >>> > >>> 2014-11-24 18:05:37,064 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
START,
> >>> >>> > >>> GetHardwareInfoVDSCommand(HostName =
Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
> >>> >>> > >>>
vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]),
> log
> >>> >>> > >>> id:
> >>> >>> > >>> 6d560cc2
> >>> >>> > >>> 2014-11-24 18:05:37,074 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
FINISH,
> >>> >>> > >>> GetHardwareInfoVDSCommand, log
> >>> >>> > >>> id: 6d560cc2
> >>> >>> > >>> 2014-11-24 18:05:37,093 WARN
> >>> >>> > >>>
[org.ovirt.engine.core.vdsbroker.VdsManager]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host
Compute5 is running
> >>> >>> > >>> with
> >>> >>> > >>> disabled
> >>> >>> > >>> SELinux.
> >>> >>> > >>> 2014-11-24 18:05:37,127 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[2b4a51cf] Running
> command:
> >>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand
internal: true.
> >>> >>> > >>> Entities
> >>> >>> > >>> affected
> >>> >>> > >>> : ID:
0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS
> >>> >>> > >>> 2014-11-24 18:05:37,147 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[2b4a51cf] START,
> >>> >>> > >>> GlusterServersListVDSCommand(HostName =
Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a),
log id: 4faed87
> >>> >>> > >>> 2014-11-24 18:05:37,164 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[2b4a51cf] FINISH,
> >>> >>> > >>> GlusterServersListVDSCommand, log id:
4faed87
> >>> >>> > >>> 2014-11-24 18:05:37,189 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.SetNonOperationalVdsCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[4a84c4e5] Running
> command:
> >>> >>> > >>> SetNonOperationalVdsCommand internal:
true. Entities
> affected :
> >>> >>> > >>> ID:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a
Type: VDS
> >>> >>> > >>> 2014-11-24 18:05:37,206 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[4a84c4e5] START,
> >>> >>> > >>> SetVdsStatusVDSCommand(HostName =
Compute5, HostId =
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a,
status=NonOperational,
> >>> >>> > >>>
nonOperationalReason=GLUSTER_COMMAND_FAILED,
> >>> >>> > >>> stopSpmFailureLogged=false),
> >>> >>> > >>> log id: fed5617
> >>> >>> > >>> 2014-11-24 18:05:37,209 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[4a84c4e5] FINISH,
> >>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617
> >>> >>> > >>> 2014-11-24 18:05:37,223 ERROR
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[4a84c4e5] Correlation
> ID:
> >>> >>> > >>> 4a84c4e5,
> >>> >>> > >>> Job
> >>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b,
Call Stack: null,
> >>> >>> > >>> Custom
> >>> >>> > >>> Event
> >>> >>> > >>> ID: -1, Message: Gluster command
[<UNKNOWN>] failed on
> server
> >>> >>> > >>> Compute5.
> >>> >>> > >>> 2014-11-24 18:05:37,243 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[4a84c4e5] Correlation
> ID:
> >>> >>> > >>> null,
> >>> >>> > >>> Call
> >>> >>> > >>> Stack: null, Custom Event ID: -1,
Message: Status of host
> >>> >>> > >>> Compute5
> >>> >>> > >>> was
> >>> >>> > >>> set
> >>> >>> > >>> to NonOperational.
> >>> >>> > >>> 2014-11-24 18:05:37,272 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.bll.HandleVdsVersionCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[a0c8a7f] Running
> command:
> >>> >>> > >>> HandleVdsVersionCommand internal: true.
Entities affected :
> >>> >>> > >>> ID:
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a
Type: VDS
> >>> >>> > >>> 2014-11-24 18:05:37,274 INFO
> >>> >>> > >>>
[org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69)
[a0c8a7f] Host
> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a :
Compute5 is already
> in
> >>> >>> > >>> NonOperational status for reason
GLUSTER_COMMAND_FAILED.
> >>> >>> > >>> SetNonOperationalVds command is skipped.
> >>> >>> > >>> 2014-11-24 18:05:38,065 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55)
[3706e836] FINISH,
> >>> >>> > >>> GlusterVolumesListVDSCommand, return:
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
>
{26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1
> },
> >>> >>> > >>> log id: 48a0c832
> >>> >>> > >>> 2014-11-24 18:05:43,243 INFO
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand]
> >>> >>> > >>> (DefaultQuartzScheduler_Worker-35)
START,
> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName =
Compute4, HostId =
> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a),
log id: 3ce13ebc
> >>> >>> > >>> ^C
> >>> >>> > >>> [root@ccr01 ~]#
> >>> >>> > >>>
> >>> >>> > >>> Thanks,
> >>> >>> > >>> Punit
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
_______________________________________________
> >>> >>> > >>> Users mailing
> >>> >>> > >>>
> >>> >>> > >>> listUsers@ovirt.orghttp://
>
lists.ovirt.org/mailman/listinfo/users
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>>
> >>> >>> > >>
> >>> >>> > >>
> >>> >>> > >
> >>> >>> > >
> >>> >>> >
> >>> >>
> >>> >>
> >>> >
> >>> >
> >>> > _______________________________________________
> >>> > Gluster-users mailing list
> >>> > Gluster-users(a)gluster.org
> >>> >
http://supercolony.gluster.org/mailman/listinfo/gluster-users
> >>
> >>
> >
>