Re: [Users] Customizing node configuration
Thanks Gianluca! As it turns out, I reinstalled the node with CentOS 6.4 and was then
able to configure it from within ovirt-engine 3.3. The only glitch was having to change
the cluster's emulated machine type from pc-1.0 to pc, since I've got 3.1 (or
3.0?) level nodes, and the ovirt-engine was upgraded from 3.1 to 3.3 the other day.
Up and running VMs on the new node, at least to test!
Allen Belletti
AVP Ed. Tech Engineering Innovation
Georgia Gwinnett College
678-407-5093
www.ggc.edu
________________________________________
From: Gianluca Cecchi <gianluca.cecchi(a)gmail.com>
Sent: Wednesday, October 02, 2013 6:56 PM
To: Allen Belletti
Cc: users(a)ovirt.org
Subject: Re: [Users] Customizing node configuration
On Thu, Oct 3, 2013 at 12:09 AM, Allen Belletti wrote:
By adding this file to /config/files, I've been able to make it
appear in
/etc/modprobe.d at boot time. This has no effect. It appears to take place
after the ixgbe driver has already been started. If I "rmmod ixgbe" and
"modprobe ixgbe" manually, it works fine.
If I remember correctly the file /etc/rc.d/rc.local is
persisted/persistable, so if it's still true in the mean time you can
put as a workaround in it
modprobe -r ixgbe
modprobe ixgbe
HIH,
Gianluca