[ovirt-users] Re: Does cluster upgrade wait for heal before proceeding to next host?

I keep reading this chain and I still don't get what/who should wait for the cluster to heal... Is there some kind of built-in autopatching feature? Here is my approach: 1. Set global maintenance 2. Power off the engine 3. Create a gluster snapshot of the engine's volume 4. Power on engine manually 5. Check engine status 6. Upgrade engine 7. Upgrade engine's OS 8. Reboot engine and check health 9. Remove global maintenance 10. Set a host into local maintenance (evacuate all VMs) 11. Use UI to patch the host (enable autoreboot) 12. When host is up - login and check gluster volumes' heal status 13. Remove maintenance for the host and repeate for the rest of the cluster. I realize that for large clusters this approach is tedious and an automatic approach can be scripted. Best Regards, Strahil Nikolov On Sep 16, 2019 11:02, Kaustav Majumder <kmajumde(a)redhat.com&gt; wrote: Hi Jayme, It would be great if you could raise a bug regarding the same. On Wed, Sep 11, 2019 at 5:05 PM Jayme <jaymef(a)gmail.com&gt; wrote: This sounds similar to the issue I hit with the cluster upgrade process in my environment. I have large 2tb ssds and most of my vms are several hundred Gbs in size. The heal process after host reboot can take 5-10 minutes to complete. I may be able to address this with better gluster tuning. Either way the upgrade process should be aware of the heal status and wait for it to complete before attempting to move on to the next host. On Wed, Sep 11, 2019 at 3:53 AM Sahina Bose <sabose(a)redhat.com&gt; wrote: On Fri, Aug 9, 2019 at 3:41 PM Martin Perina <mperina(a)redhat.com&gt; wrote: On Thu, Aug 8, 2019 at 10:25 AM Sandro Bonazzola <sbonazzo(a)redhat.com&gt; wrote: Il giorno mar 6 ago 2019 alle ore 23:17 Jayme <jaymef(a)gmail.com&gt; ha scritto: I’m aware of the heal process but it’s unclear to me if the update continues to run while the volumes are healing and resumes when they are done. There doesn’t seem to be any indication in the ui (unless I’m mistaken) Adding @Martin Perina <mperina(a)redhat.com&gt; , @Sahina Bose <sabose(a)redhat.com&gt; and @Laura Wright <lwright(a)redhat.com&gt; on this, hyperconverged deployments using cluster upgrade command would probably need some improvement. The cluster upgrade process continues to the 2nd host after the 1st host becomes Up. If 2nd host then fails to switch to maintenance, we stop the upgrade process to prevent breakage. Sahina, is gluster healing process status exposed in RESTAPI? If so, does it makes sense to wait for healing to be finished before trying to move next host to maintenance? Or any other ideas how to improve? I need to cross-check this, if we expose the heal count in the gluster bricks. Moving a host to maintenance does check if there are pending heal entries or possibility of quorum loss. And this would prevent the additional hosts to upgrade. +Gobinda Das <godas(a)redhat.com&gt; +Sachidananda URS <surs(a)redhat.com&gt; On Tue, Aug 6, 2019 at 6:06 PM Robert O'Kane <okane(a)khm.de&gt; wrote: Hello, Often(?), updates to a hypervisor that also has (provides) a Gluster brick takes the hypervisor offline (updates often require a reboot). This reboot then makes the brick "out of sync" and it has to be resync'd. I find it a "feature" than another host that is also part of a gluster domain can not be updated (rebooted) before all the bricks are updated in order to guarantee there is not data loss. It is called Quorum, or? Always let the heal process end. Then the next update can start. For me there is ALWAYS a healing time before Gluster is happy again. Cheers, Robert O'Kane Am 06.08.2019 um 16:38 schrieb Shani Leviim: > Hi Jayme, > I can't recall such a healing time. > Can you please retry and attach the engine & vdsm logs so we'll be smarter? > > *Regards, > * > *Shani Leviim > * > > > On Tue, Aug 6, 2019 at 5:24 PM Jayme <jaymef(a)gmail.com > <mailto:jaymef@gmail.com>> wrote: > > I've yet to have cluster upgrade finish updating my three host HCI > cluster. The most recent try was today moving from oVirt 4.3.3 to > 4.3.5.5. The first host updates normally, but when it moves on to > the second host it fails to put it in maintenance and the cluster > upgrade stops. > > I suspect this is due to that fact that after my hosts are updated > it takes 10 minutes or more for all volumes to sync/heal. I have > 2Tb SSDs. > > Does the cluster upgrade process take heal time in to account before > attempting to place the next host in maintenance to upgrade it? Or > is there something else that may be at fault here, or perhaps a > reason why the heal process takes 10 minutes after reboot to complete? > _______________________________________________ > Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org > <mailto:users-leave@ovirt.org> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/5XM3QB3364Z... > > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > To unsubscribe send an email to users-leave(a)ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GBX3L23MWGM... > -- Systems Administrator Kunsthochschule für Medien Köln Peter-Welter-Platz 2 50676 Köln _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/OBAHFFFTDOI... _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/T27ROHWZPJL... -- Sandro Bonazzola MANAGER, SOFTWARE ENGINEERING, EMEA R&D RHV Red Hat EMEA <https://www.redhat.com/> sbonazzo(a)redhat.com <https://www.redhat.com/>*Red Hat respects your work life balance. Therefore there is no need to answer this email out of your office hours. <https://mojo.redhat.com/docs/DOC-1199578>* -- Martin Perina Manager, Software Engineering Red Hat Czech s.r.o. _______________________________________________ Users mailing list -- users(a)ovirt.org To unsubscribe send an email to users-leave(a)ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/I4KLDBPYBCQ... -- Thanks, Kaustav Majumder