Re: [ovirt-users] Multiple ips to a single nic

16 Sep 2014

      On 09/16/2014 11:46 AM, Shanil S wrote:
...
Hi All,
I would like to add multiple ips to a single nic using the ovirt api
function. Is it possible to assign multiple ips to a single nic using
the ovirt api ?
Remember that you can't set any IP configuration of a network interface
from outside the guest, so you need to use cloud-init or similar. With
cloud-init you can use the "nic" element several times, using names like
eth0:0, eth0:1, etc:

<action>
  <vm>
    <initialization>
      <cloud_init>
        <network_configuration>
          <nics>
            <nic>
              <name>eth0</name>
              <boot_protocol>static</boot_protocol>
              <network>
                <ip address="192.168.122.31" netmask="255.255.255"
gateway="192.168.122.1"/>
              </network>
              <on_boot>true</on_boot>
            </nic>
            <nic>
              <name>eth0:0</name>
              <boot_protocol>static</boot_protocol>
              <network>
                <ip address="192.168.122.32" netmask="255.255.255.0"
gateway="192.168.122.1"/>
              </network>
              <on_boot>true</on_boot>
            </nic>
            <nic>
              <name>eth0:1</name>
              <boot_protocol>static</boot_protocol>
              <network>
                <ip address="192.168.122.33" netmask="255.255.255.0"
gateway="192.168.122.1"/>
              </network>
              <on_boot>true</on_boot>
            </nic>
          </nics>
        </network_configuration>
      </cloud_init>
    </initialization>
  </vm>
</action>

This will produce a network configuration file like this:

iface eth0 inet static
  address 192.168.122.31
  netmask 255.255.255
  gateway 192.168.122.1
iface eth0:0 inet static
  address 192.168.122.32
  netmask 255.255.255.0
  gateway 192.168.122.1
iface eth0:1 inet static
  address 192.168.122.33
  netmask 255.255.255.0
  gateway 192.168.122.1
auto eth0 eth0:0 eth0:1

Cloud-init should then translate that into the correct configuration
within the host. It should work correctly in RHEL/Fedora, but I guess
this isn't a contract of cloud-init, so it may fail in other distros or
in future versions.

Anyhow, you may consider adding multiple network interfaces to the VM,
instead of multiple IPs in the same interface. They don't cost anything
and give you more flexibility if you want to physically separate networks.

-- 
Dirección Comercial: C/Jose Bardasano Baos, 9, Edif. Gorbea 3, planta
3ºD, 28016 Madrid, Spain
Inscrita en el Reg. Mercantil de Madrid – C.I.F. B82657941 - Red Hat S.L.

Re: [ovirt-users] Multiple ips to a single nic

Juan Hernandez