8:35 p.m.
Ok so if you want to set the management network (untagged) and VM networks (tagged) on the
same bond,
then the management network has to be non-VM. IE: You won't be able to connect
instances to the management
network.
Assaf Muller, Cloud Networking Engineer
Red Hat
----- Original Message -----
From: "William Kwan" <potatok(a)yahoo.com>
To: "Assaf Muller" <amuller(a)redhat.com>
Cc: users(a)ovirt.org, "Christian Hernandez" <christianh(a)4over.com>
Sent: Thursday, January 16, 2014 7:59:46 PM
Subject: Re: [Users] vlan on mgmt network
Assaf,
Thanks a lot. Will I be able to mix tagged and untagged traffic?
Example:
- bond0 on my two systems are on the management network, untagged
- my VMs all have one connection to this management network
- I want to setup a new VM with two interfaces, one on the management network, one on the
tagged VLAN
This will work it out?
Thanks
Will
On Thursday, January 16, 2014 12:26 PM, Assaf Muller <amuller(a)redhat.com> wrote:
You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place
as many VM, tagged networks as you'd like on the same NIC or bond.
Here's a working upgrade procedure:
1) Edit ovirtmgmt, mark it as non-VM.
2) Go to all hosts using this network, select Setup Host Networks. You'll see that
ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of
course :)
Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4
3) Create VM, VLAN networks
4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on
bond0.
You don't need to do any prep work on your hosts before this procedure. oVirt will
take care
of this stuff for you.
Assaf Muller, Cloud Networking Engineer
Red Hat
----- Original Message -----
From: "Christian Hernandez" <christianh(a)4over.com>
To: "William Kwan" <potatok(a)yahoo.com>
Cc: users(a)ovirt.org
Sent: Thursday, January 16, 2014 6:36:49 PM
Subject: Re: [Users] vlan on mgmt network
Assuming it's on the same VLAN...
I would make the subinterface (i.e. bond0.1)
Thank you,
Christian Hernandez
1225 Los Angeles Street
Glendale, CA 91204
Phone: 877-782-2737 ext. 4566
Fax: 818-265-3152
christianh(a)4over.com <mailto: christianh(a)4over.com >
www.4over.com < http://www.4over.com >
On Thu, Jan 16, 2014 at 8:31 AM, William Kwan < potatok(a)yahoo.com > wrote:
Hi all,
CentOS 6.5 and oVirt 3.3
Let's say I have bond0 (eth0 and eth1) on a management network.
Logical network ovirtmgmt is set and working on top of Interfaces bond0.
Is it possible to have another Logical network, e.g. ovirt777, on the same Interface
bond0?
Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical
network with this virtual interface?
Wil
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users