Could you ssh to the host and do:
cat /sys/class/net/bonding_masters
There is a limitation on ovirt-3.2 that only the default bridges
can be used. If you don't have enough of them, you can always
create the needed bridge doing
echo "+bondN" > /sys/class/net/bonding_masters
where N is the bridge you want to create.
It would also be helpful to see the contents of doing
vdsClient -s 0 getVdsCaps
Best,
Toni
----- Original Message -----
From: "Yuriy Demchenko" <demchenko.ya(a)gmail.com>
To: "users" <users(a)ovirt.org>
Sent: Wednesday, March 6, 2013 12:17:28 PM
Subject: Re: [Users] ovirt 3.2 networking setup problems
Hi,
I'm still cant solve this issue - "There are no available Bonds"
I've done clean install of ovirt-3.2 (from dreyou repo), added
freshly-kickstarted host. In my kickstart I set up 2 interfaces
em1/em2
as slaves to bond0 (mode=6), which is slave to bridge "ovirtmgmt"
(just
so i dont need to click more buttons in webadmin setting up bond for
mgmt network).
After that, on page "setup host networks" I can see correct scheme
for
ovirtmgmt network and 4 other unused NICs.
I want to set up another 2 bonds from that unused NICs, but here's
the
problem strikes: when trying to bond 2 NICs together i have to chose
bond name - and there's only 1 choise - "bond4", I pick that and
trying
to bond the rest 2 NICs - I get error message "There are no available
Bonds".
And nothing in engine.log or vdsm.log
Why is that and how to solve it?
Yuriy Demchenko
On 02/26/2013 12:37 PM, Yuriy Demchenko wrote:
> 2.
> when i'm trying to team NIC's in bonds, i've got choice from only 3
> bonds: "bond0", "bond1", "bond4" - why is that list is
fixed?
> If I've allready defined bond0+bond1 prior adding host to ovirt
> (via
> kickstart), even if they aren't used - choice list in ovirt host
> networks is short to "bond4" and trying to bond more interfaces
> ends
> up with "there no bonds available"
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users