Re: [ovirt-users] Hosted-engine-Issue

Below are the details, unable to ping the gateway from the ovirt engine ,able to ping the ovirt engine from host as both are there in the same network. [root@oe ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0 inet6 fe80::216:3eff:fe33:38e5/64 scope link valid_lft forever preferred_lft forever [root@oe ~]# [root@oe ~]# [root@oe ~]# [root@oe ~]# ip route 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9 169.254.0.0/16 dev eth0 scope link metric 1002 default via 10.206.67.254 dev eth0 [root@oe ~]# [root@oe ~]# [root@oe ~]# [root@oe ~]# brctl show bridge name bridge id STP enabled interfaces [root@oe ~]# On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi(a)redhat.com&gt; wrote: > On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor(a)gmail.com&gt; > wrote: > > HI > > > > Installed hosted engine and after configuring IP to ovirt engine > unable to > > ping the gateway and found that there is no issue with the Network . > > You mean that from inside the engine machine, you cannot ping the gateway? > > Can you ping it from the host? > > Please share output of these commands, from both the host and the engine > vm: > > ip addr > ip route > brctl show > > Thanks, > > > > > Is there any thing am missing while installing Hosted engine ? below is > > output details, > > > > > > --== CONFIGURATION PREVIEW ==-- > > > > Engine FQDN : oe.bnglab.psecure.net > > Bridge name : ovirtmgmt > > SSH daemon port : 22 > > Gateway address : 10.206.67.254 > > Host name for web application : hosted_engine_1 > > Host ID : 1 > > Image alias : hosted_engine > > Image size GB : 25 > > Storage connection : 10.204.207.152: > /home/heoe > > Console type : vnc > > Memory size MB : 4096 > > MAC address : 00:16:3e:2f:5c:40 > > Boot type : cdrom > > Number of CPUs : 2 > > ISO image (for cdrom boot) : > > /ovirt/CentOS-6.7-x86_64-minimal.iso > > CPU Type : model_SandyBridge > > > > Please confirm installation settings (Yes, No)[Yes]: yes > > [ INFO ] Stage: Transaction setup > > [ INFO ] Stage: Misc configuration > > [ INFO ] Stage: Package installation > > [ INFO ] Stage: Misc configuration > > [ INFO ] Configuring libvirt > > [ INFO ] Configuring VDSM > > [ INFO ] Starting vdsmd > > [ INFO ] Waiting for VDSM hardware info > > [ INFO ] Waiting for VDSM hardware info > > [ INFO ] Creating Storage Domain > > [ INFO ] Creating Storage Pool > > [ INFO ] Connecting Storage Pool > > [ INFO ] Verifying sanlock lockspace initialization > > [ INFO ] Creating VM Image > > [ INFO ] Disconnecting Storage Pool > > [ INFO ] Start monitoring domain > > [ INFO ] Configuring VM > > [ INFO ] Updating hosted-engine configuration > > [ INFO ] Stage: Transaction commit > > [ INFO ] Stage: Closing up > > The following network ports should be opened: > > tcp:5900 > > tcp:5901 > > udp:5900 > > udp:5901 > > An example of the required configuration for iptables can be > found > > at: > > /etc/ovirt-hosted-engine/iptables.example > > In order to configure firewalld, copy the files from > > /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services > > and execute the following commands: > > firewall-cmd -service hosted-console > > [ INFO ] Creating VM > > You can now connect to the VM with the following command: > > /usr/bin/remote-viewer vnc://localhost:5900 > > Use temporary password "2049ZfXr" to connect to vnc console. > > Please note that in order to use remote-viewer you need to be > able > > to run graphical applications. > > This means that if you are using ssh you have to supply the -Y > > flag (enables trusted X11 forwarding). > > Otherwise you can run the command from a terminal in your > > preferred desktop environment. > > If you cannot run graphical applications you can connect to > the > > graphic console from another host or connect to the console using the > > following command: > > virsh -c qemu+tls://Test/system console HostedEngine > > If you need to reboot the VM you will need to start it > manually > > using the command: > > hosted-engine --vm-start > > You can then set a temporary password using the command: > > hosted-engine --add-console-password > > The VM has been started. Install the OS and shut down or > reboot > > it. To continue please make a selection: > > > > (1) Continue setup - VM installation is complete > > (2) Reboot the VM and restart installation > > (3) Abort setup > > (4) Destroy VM and abort setup > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > -- > Didi >