Re: [ovirt-users] [Gluster-users] Gluster command [<UNKNOWN>] failed on server...

Hi, Can Any body help me on this ?? On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypunit(a)gmail.com&gt; wrote: > > Hi Kaushal, > > Thanks for the detailed reply....let me explain my setup first :- > > 1. Ovirt Engine > 2. 4* host as well as storage machine (Host and gluster combined) > 3. Every host has 24 bricks... > > Now whenever the host machine reboot...it can come up but can not join the > cluster again and through the following error "Gluster command [<UNKNOWN>] > failed on server.." > > Please check my comment in line :- > > 1. Use the same string for doing the peer probe and for the brick address > during volume create/add-brick. Ideally, we suggest you use properly > resolvable FQDNs everywhere. If that is not possible, then use only IP > addresses. Try to avoid short names. > --------------- > [root@cpu05 ~]# gluster peer status > Number of Peers: 3 > > Hostname: cpu03.stack.com > Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb > State: Peer in Cluster (Connected) > > Hostname: cpu04.stack.com > Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0 > State: Peer in Cluster (Connected) > Other names: > 10.10.0.8 > > Hostname: cpu02.stack.com > Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25 > State: Peer in Cluster (Connected) > [root@cpu05 ~]# > ---------------- > 2. During boot up, make sure to launch glusterd only after the network is > up. This will allow the new peer identification mechanism to do its > job correctly. > >> I think the service itself doing the same job.... > > [root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service > [Unit] > Description=GlusterFS, a clustered file-system server > After=network.target rpcbind.service > Before=network-online.target > > [Service] > Type=forking > PIDFile=/var/run/glusterd.pid > LimitNOFILE=65536 > ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid > KillMode=process > > [Install] > WantedBy=multi-user.target > [root@cpu05 ~]# > -------------------- > > gluster logs :- > > [2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main] > 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1 > (args: /usr/sbin/glusterd -p /var/run/glusterd.pid) > [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management: > Maximum allowed open file descriptors set to 65536 > [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management: Using > /var/lib/glusterd as working directory > [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create] > 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) > [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management: > Failed to initialize IB Device > [2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load] > 0-rpc-transport: 'rdma' initialization failed > [2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create] > 0-rpc-service: cannot create listener, initing the transport failed > [2014-11-24 09:22:22.156290] I > [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: geo-replication > module not installed in the system > [2014-11-24 09:22:22.161318] I > [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: retrieved > op-version: 30600 > [2014-11-24 09:22:22.821800] I > [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: > connect returned 0 > [2014-11-24 09:22:22.825810] I > [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: > connect returned 0 > [2014-11-24 09:22:22.828705] I > [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: > connect returned 0 > [2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init] > 0-management: setting frame-timeout to 600 > [2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init] > 0-management: setting frame-timeout to 600 > [2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init] > 0-management: setting frame-timeout to 600 > [2014-11-24 09:22:22.840209] E > [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve > brick failed in restore > [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management: > Initialization of volume 'management' failed, review your volfile again > [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init] > 0-management: initializing translator failed > [2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate] > 0-graph: init failed > [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (--> > 0-: received signum (0), shutting down > > Thanks, > Punit > > > > > On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlmster(a)gmail.com&gt; wrote: >> >> Based on the logs I can guess that glusterd is being started before >> the network has come up and that the addresses given to bricks do not >> directly match the addresses used in during peer probe. >> >> The gluster_after_reboot log has the line "[2014-11-25 >> 06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks] >> 0-glusterd: resolve brick failed in restore". >> >> Brick resolution fails when glusterd cannot match the address for the >> brick, with one of the peers. Brick resolution happens in two phases, >> 1. We first try to identify the peer by performing string comparisions >> with the brick address and the peer addresses (The peer names will be >> the names/addresses that were given when the peer was probed). >> 2. If we don't find a match from step 1, we will then resolve all the >> brick address and the peer addresses into addrinfo structs, and then >> compare these structs to find a match. This process should generally >> find a match if available. This will fail only if the network is not >> up yet as we cannot resolve addresses. >> >> The above steps are applicable only to glusterfs versions >=3.6. They >> were introduced to reduce problems with peer identification, like the >> one you encountered >> >> Since both of the steps failed to find a match in one run, but >> succeeded later, we can come to the conclusion that, >> a) the bricks don't have the exact same string used in peer probe for >> their addresses as step 1 failed, and >> b) the network was not up in the initial run, as step 2 failed during >> the initial run, but passed in the second run. >> >> Please let me know if my conclusion is correct. >> >> If it is, you can solve your problem in two ways. >> 1. Use the same string for doing the peer probe and for the brick >> address during volume create/add-brick. Ideally, we suggest you use >> properly resolvable FQDNs everywhere. If that is not possible, then >> use only IP addresses. Try to avoid short names. >> 2. During boot up, make sure to launch glusterd only after the network >> is up. This will allow the new peer identification mechanism to do its >> job correctly. >> >> >> If you have already followed these steps and yet still hit the >> problem, then please provide more information (setup, logs, etc.). It >> could be much different problem that you are facing. >> >> ~kaushal >> >> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypunit(a)gmail.com&gt; >> wrote: >> > Is there any one can help on this ?? >> > >> > Thanks, >> > punit >> > >> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <hypunit(a)gmail.com&gt; >> > wrote: >> >> >> >> Hi, >> >> >> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7 >> >> >> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy >> >> <kmayilsa(a)redhat.com&gt; >> >> wrote: >> >>> >> >>> [+Gluster-users(a)gluster.org] >> >>> >> >>> "Initialization of volume 'management' failed, review your volfile >> >>> again", glusterd throws this error when the service is started >> >>> automatically >> >>> after the reboot. But the service is successfully started later >> >>> manually by >> >>> the user. >> >>> >> >>> can somebody from gluster-users please help on this? >> >>> >> >>> glusterfs version: 3.5.1 >> >>> >> >>> Thanks, >> >>> Kanagaraj >> >>> >> >>> ----- Original Message ----- >> >>> > From: "Punit Dambiwal" <hypunit(a)gmail.com&gt; >> >>> > To: "Kanagaraj" <kmayilsa(a)redhat.com&gt; >> >>> > Cc: users(a)ovirt.org >> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM >> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on >> >>> > server... >> >>> > >> >>> > Hi Kanagraj, >> >>> > >> >>> > Please check the attached log files....i didn't find any thing >> >>> > special.... >> >>> > >> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <kmayilsa(a)redhat.com&gt; >> >>> > wrote: >> >>> > >> >>> > > Do you see any errors in >> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log >> >>> > > when >> >>> > > the >> >>> > > service is trying to start automatically after the reboot? >> >>> > > >> >>> > > Thanks, >> >>> > > Kanagaraj >> >>> > > >> >>> > > >> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote: >> >>> > > >> >>> > > Hi Kanagaraj, >> >>> > > >> >>> > > Yes...once i will start the gluster service and then vdsmd >> >>> > > ...the >> >>> > > host >> >>> > > can connect to cluster...but the question is why it's not started >> >>> > > even it >> >>> > > has chkconfig enabled... >> >>> > > >> >>> > > I have tested it in two host cluster environment...(Centos 6.6 >> >>> > > and >> >>> > > centos 7.0) on both hypervisior cluster..it's failed to reconnect >> >>> > > in >> >>> > > to >> >>> > > cluster after reboot.... >> >>> > > >> >>> > > In both the environment glusterd enabled for next boot....but >> >>> > > it's >> >>> > > failed with the same error....seems it's bug in either gluster or >> >>> > > Ovirt ?? >> >>> > > >> >>> > > Please help me to find the workaround here if can not resolve >> >>> > > it...as >> >>> > > without this the Host machine can not connect after >> >>> > > reboot....that >> >>> > > means >> >>> > > engine will consider it as down and every time need to manually >> >>> > > start >> >>> > > the >> >>> > > gluster service and vdsmd... ?? >> >>> > > >> >>> > > Thanks, >> >>> > > Punit >> >>> > > >> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <kmayilsa(a)redhat.com&gt; >> >>> > > wrote: >> >>> > > >> >>> > >> From vdsm.log "error: Connection failed. Please check if >> >>> > >> gluster >> >>> > >> daemon >> >>> > >> is operational." >> >>> > >> >> >>> > >> Starting glusterd service should fix this issue. 'service >> >>> > >> glusterd >> >>> > >> start' >> >>> > >> But i am wondering why the glusterd was not started >> >>> > >> automatically >> >>> > >> after >> >>> > >> the reboot. >> >>> > >> >> >>> > >> Thanks, >> >>> > >> Kanagaraj >> >>> > >> >> >>> > >> >> >>> > >> >> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote: >> >>> > >> >> >>> > >> Hi Kanagaraj, >> >>> > >> >> >>> > >> Please find the attached VDSM logs :- >> >>> > >> >> >>> > >> ---------------- >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> >> >>> > >> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >> >>> > >> Owner.cancelAll requests {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref) >> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting >> >>> > >> False >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState) >> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state >> >>> > >> init >> >>> > >> -> >> >>> > >> state preparing >> >>> > >> Thread-13::INFO::2014-11-24 >> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and >> >>> > >> protect: >> >>> > >> repoStats(options=None) >> >>> > >> Thread-13::INFO::2014-11-24 >> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and >> >>> > >> protect: >> >>> > >> repoStats, Return response: {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare) >> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState) >> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state >> >>> > >> preparing >> >>> > >> -> >> >>> > >> state finished >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> >> >>> > >> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) >> >>> > >> Owner.releaseAll requests {} resources {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> >> >>> > >> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >> >>> > >> Owner.cancelAll requests {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref) >> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting >> >>> > >> False >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client >> >>> > >> [10.10.10.2]::call >> >>> > >> getCapabilities with () {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,553::utils::738::root::(execCmd) >> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None) >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,560::utils::758::root::(execCmd) >> >>> > >> SUCCESS: <err> = ''; <rc> = 0 >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift-object',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift-plugin',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift-account',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift-proxy',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift-doc',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('gluster-swift-container',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package >> >>> > >> ('glusterfs-geo-replication',) not found >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,600::caps::646::root::(get) >> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required >> >>> > >> >= >> >>> > >> 0.10.2-31 >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return >> >>> > >> getCapabilities >> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info': >> >>> > >> {'HBAInventory': >> >>> > >> {'iSCSI': [{'InitiatorName': >> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}], >> >>> > >> 'FC': >> >>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64', >> >>> > >> 'buildtime': >> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma': >> >>> > >> {'release': >> >>> > >> '1.el6', >> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'glusterfs-fuse': >> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': >> >>> > >> '3.5.1'}, >> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime': >> >>> > >> 1402324637L, >> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release': '1.gitdb83943.el6', >> >>> > >> 'buildtime': >> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release': >> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version': >> >>> > >> '0.12.1.2'}, >> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime': >> >>> > >> 1402435700L, >> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': '29.el6_5.9', >> >>> > >> 'buildtime': >> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': {'release': >> >>> > >> '1.el6', >> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom': >> >>> > >> {'release': >> >>> > >> '2.el6', >> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'}, >> >>> > >> 'glusterfs-server': >> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': >> >>> > >> '3.5.1'}}, >> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]}, 'cpuModel': >> >>> > >> 'Intel(R) >> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': 'false', >> >>> > >> 'hooks': >> >>> > >> {}, >> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': {'mode': '1'}, >> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'], >> >>> > >> 'networks': >> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': '43.252.176.16', >> >>> > >> 'bridged': >> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': >> >>> > >> '1500', >> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', 'ipv4addrs': >> >>> > >> [' >> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>], 'interface': >> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': '43.25.17.1'}, >> >>> > >> 'Internal': >> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': 'no', >> >>> > >> 'HOTPLUG': >> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no', >> >>> > >> 'BOOTPROTO': >> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': 'Bridge', >> >>> > >> 'ONBOOT': >> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs': >> >>> > >> ['fe80::210:18ff:fecd:daac/64'], >> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp': >> >>> > >> 'off', >> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', 'ports': >> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr': >> >>> > >> '10.10.10.6', >> >>> > >> 'bridged': False, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], >> >>> > >> 'mtu': >> >>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0', >> >>> > >> 'ipv4addrs': [' >> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], 'interface': >> >>> > >> u'bond1', >> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': {'iface': >> >>> > >> 'VMNetwork', >> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU': >> >>> > >> '1500', >> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP': >> >>> > >> 'off', >> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, >> >>> > >> 'bridged': >> >>> > >> True, >> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '', >> >>> > >> 'bootproto4': >> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'mtu': >> >>> > >> '1500', >> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges': >> >>> > >> {'Internal': >> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU': >> >>> > >> '9000', >> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP': >> >>> > >> 'off', >> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, >> >>> > >> 'ipv6addrs': >> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', 'netmask': '', >> >>> > >> 'stp': >> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway': '', >> >>> > >> 'opts': >> >>> > >> {'topology_change_detected': '0', 'multicast_last_member_count': >> >>> > >> '2', >> >>> > >> 'hash_elasticity': '4', 'multicast_query_response_interval': >> >>> > >> '999', >> >>> > >> 'multicast_snooping': '1', 'multicast_startup_query_interval': >> >>> > >> '3124', >> >>> > >> 'hello_timer': '31', 'multicast_querier_interval': '25496', >> >>> > >> 'max_age': >> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id': >> >>> > >> '8000.001018cddaac', 'priority': '32768', >> >>> > >> 'multicast_membership_interval': >> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0', >> >>> > >> 'multicast_querier': >> >>> > >> '0', >> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199', >> >>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac', >> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', >> >>> > >> 'gc_timer': >> >>> > >> '31', >> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', >> >>> > >> 'multicast_query_interval': '12498', >> >>> > >> 'multicast_last_member_interval': >> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports': >> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': {'DEFROUTE': >> >>> > >> 'no', >> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', 'NM_CONTROLLED': >> >>> > >> 'no', >> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork', >> >>> > >> 'TYPE': >> >>> > >> 'Bridge', >> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], >> >>> > >> 'mtu': >> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], >> >>> > >> 'ipv6gateway': >> >>> > >> '::', >> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0', >> >>> > >> 'multicast_last_member_count': '2', 'hash_elasticity': '4', >> >>> > >> 'multicast_query_response_interval': '999', >> >>> > >> 'multicast_snooping': >> >>> > >> '1', >> >>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer': >> >>> > >> '131', >> >>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999', >> >>> > >> 'hash_max': >> >>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c', >> >>> > >> 'priority': >> >>> > >> '32768', 'multicast_membership_interval': '25996', >> >>> > >> 'root_path_cost': >> >>> > >> '0', >> >>> > >> 'root_port': '0', 'multicast_querier': '0', >> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199', >> >>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c', >> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', >> >>> > >> 'gc_timer': >> >>> > >> '31', >> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', >> >>> > >> 'multicast_query_interval': '12498', >> >>> > >> 'multicast_last_member_interval': >> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports': >> >>> > >> ['bond0.36']}}, 'uuid': '44454C4C-4C00-1057-8053-B7C04F504E31', >> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': {'permhwaddr': >> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes', >> >>> > >> 'NM_CONTROLLED': >> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', 'MASTER': >> >>> > >> 'bond1', >> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu': >> >>> > >> '9000', >> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '00:10:18:cd:da:ac', >> >>> > >> 'speed': >> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', 'addr': '', >> >>> > >> 'cfg': >> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000', 'HWADDR': >> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2', >> >>> > >> 'ONBOOT': >> >>> > >> 'no'}, >> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', 'ipv4addrs': [], >> >>> > >> 'hwaddr': >> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': {'permhwaddr': >> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes', >> >>> > >> 'NM_CONTROLLED': >> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', 'MASTER': >> >>> > >> 'bond0', >> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu': >> >>> > >> '1500', >> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', >> >>> > >> 'speed': >> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', 'addr': '', >> >>> > >> 'cfg': >> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500', 'HWADDR': >> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0', >> >>> > >> 'ONBOOT': >> >>> > >> 'yes'}, >> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', 'ipv4addrs': [], >> >>> > >> 'hwaddr': >> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, 'software_revision': '1', >> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', '3.5'], >> >>> > >> 'cpuFlags': >> >>> > >> >> >>> > >> >> >>> > >> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270', >> >>> > >> 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:32151ce183c8', >> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0', '3.1', >> >>> > >> '3.2', >> >>> > >> '3.3', >> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': '321', >> >>> > >> 'bondings': >> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', >> >>> > >> 'slaves': >> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg': >> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no', >> >>> > >> 'BONDING_OPTS': >> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'}, >> >>> > >> 'ipv6addrs': >> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', 'netmask': '', >> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves': >> >>> > >> ['eth0', >> >>> > >> 'eth1'], >> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr': >> >>> > >> '10.10.10.6', >> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', 'HOTPLUG': >> >>> > >> 'no', >> >>> > >> 'MTU': >> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', >> >>> > >> 'BOOTPROTO': >> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE': 'bond1', >> >>> > >> 'ONBOOT': >> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'mtu': >> >>> > >> '9000', >> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['10.10.10.6/24' >> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr': '00:10:18:cd:da:ac', >> >>> > >> 'slaves': >> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}}, >> >>> > >> 'bond2': >> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': >> >>> > >> [], >> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, >> >>> > >> 'mtu': >> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr': >> >>> > >> '00:00:00:00:00:00'}}, >> >>> > >> 'software_version': '4.16', 'memSize': '24019', 'cpuSpeed': >> >>> > >> '2667.000', >> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6, 7, 8, >> >>> > >> 9, >> >>> > >> 10, 11, >> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278', 'cpus': >> >>> > >> [0, >> >>> > >> 1, 2, >> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow Man', >> >>> > >> 'vlans': >> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16', 'cfg': >> >>> > >> {'DEFROUTE': >> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG': 'no', >> >>> > >> 'GATEWAY': >> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', >> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500', >> >>> > >> 'ONBOOT': >> >>> > >> 'yes'}, >> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10, >> >>> > >> 'mtu': >> >>> > >> '1500', >> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['43.25.17.16/24'] >> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface': 'bond0', >> >>> > >> 'addr': >> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', 'HOTPLUG': >> >>> > >> 'no', >> >>> > >> 'MTU': >> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', 'ONBOOT': >> >>> > >> 'no'}, >> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36, >> >>> > >> 'mtu': >> >>> > >> '1500', >> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface': 'bond1', >> >>> > >> 'addr': >> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', 'HOTPLUG': >> >>> > >> 'no', >> >>> > >> 'MTU': >> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100', 'ONBOOT': >> >>> > >> 'no'}, >> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100, >> >>> > >> 'mtu': >> >>> > >> '9000', >> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12', >> >>> > >> 'kvmEnabled': >> >>> > >> 'true', >> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24', 'emulatedMachines': >> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0', u'rhel6.2.0', >> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4', >> >>> > >> u'rhel5.4.0'], >> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', 'version': >> >>> > >> '6', >> >>> > >> 'name': >> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client >> >>> > >> [10.10.10.2]::call >> >>> > >> getHardwareInfo with () {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return >> >>> > >> getHardwareInfo >> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info': >> >>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber': >> >>> > >> '7LWSPN1', >> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00', 'systemUUID': >> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer': >> >>> > >> 'Dell'}} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client >> >>> > >> [10.10.10.2]::call >> >>> > >> hostsList with () {} flowID [222e8036] >> >>> > >> Thread-13::ERROR::2014-11-24 >> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm exception >> >>> > >> occured >> >>> > >> Traceback (most recent call last): >> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in >> >>> > >> wrapper >> >>> > >> res = f(*args, **kwargs) >> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in wrapper >> >>> > >> rv = func(*args, **kwargs) >> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in hostsList >> >>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()} >> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ >> >>> > >> return callMethod() >> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> >> >>> > >> **kwargs) >> >>> > >> File "<string>", line 2, in glusterPeerStatus >> >>> > >> File "/usr/lib64/python2.6/multiprocessing/managers.py", line >> >>> > >> 740, >> >>> > >> in >> >>> > >> _callmethod >> >>> > >> raise convert_to_error(kind, result) >> >>> > >> GlusterCmdExecFailedException: Command execution failed >> >>> > >> error: Connection failed. Please check if gluster daemon is >> >>> > >> operational. >> >>> > >> return code: 1 >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState) >> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state >> >>> > >> init >> >>> > >> -> >> >>> > >> state preparing >> >>> > >> Thread-13::INFO::2014-11-24 >> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and >> >>> > >> protect: >> >>> > >> repoStats(options=None) >> >>> > >> Thread-13::INFO::2014-11-24 >> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and >> >>> > >> protect: >> >>> > >> repoStats, Return response: {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare) >> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState) >> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state >> >>> > >> preparing >> >>> > >> -> >> >>> > >> state finished >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> >> >>> > >> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) >> >>> > >> Owner.releaseAll requests {} resources {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> >> >>> > >> >> >>> > >> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >> >>> > >> Owner.cancelAll requests {} >> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref) >> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting >> >>> > >> False >> >>> > >> ------------------------------- >> >>> > >> >> >>> > >> [root@compute4 ~]# service glusterd status >> >>> > >> glusterd is stopped >> >>> > >> [root@compute4 ~]# chkconfig --list | grep glusterd >> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on >> >>> > >> 6:off >> >>> > >> [root@compute4 ~]# >> >>> > >> >> >>> > >> Thanks, >> >>> > >> Punit >> >>> > >> >> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj <kmayilsa(a)redhat.com&gt; >> >>> > >> wrote: >> >>> > >> >> >>> > >>> Can you send the corresponding error in vdsm.log from the >> >>> > >>> host? >> >>> > >>> >> >>> > >>> Also check if glusterd service is running. >> >>> > >>> >> >>> > >>> Thanks, >> >>> > >>> Kanagaraj >> >>> > >>> >> >>> > >>> >> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote: >> >>> > >>> >> >>> > >>> Hi, >> >>> > >>> >> >>> > >>> After reboot my Hypervisior host can not activate again in the >> >>> > >>> cluster >> >>> > >>> and failed with the following error :- >> >>> > >>> >> >>> > >>> Gluster command [<UNKNOWN>] failed on server... >> >>> > >>> >> >>> > >>> Engine logs :- >> >>> > >>> >> >>> > >>> 2014-11-24 18:05:28,397 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-64) START, >> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = >> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90 >> >>> > >>> 2014-11-24 18:05:30,609 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH, >> >>> > >>> GlusterVolumesListVDSCommand, >> >>> > >>> return: >> >>> > >>> >> >>> > >>> >> >>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0}, >> >>> > >>> log id: 5f251c90 >> >>> > >>> 2014-11-24 18:05:33,768 INFO >> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>> > >>> (ajp--127.0.0.1-8702-8) >> >>> > >>> [287d570d] Lock Acquired to object EngineLock [exclusiveLocks= >> >>> > >>> key: >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS >> >>> > >>> , sharedLocks= ] >> >>> > >>> 2014-11-24 18:05:33,795 INFO >> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running command: >> >>> > >>> ActivateVdsCommand internal: false. Entities affected : ID: >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction group >> >>> > >>> MANIPULATE_HOST >> >>> > >>> with role type ADMIN >> >>> > >>> 2014-11-24 18:05:33,796 INFO >> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before acquiring >> >>> > >>> lock in >> >>> > >>> order to prevent monitoring for host Compute5 from data-center >> >>> > >>> SV_WTC >> >>> > >>> 2014-11-24 18:05:33,797 INFO >> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock acquired, >> >>> > >>> from >> >>> > >>> now a >> >>> > >>> monitoring of host will be skipped for host Compute5 from >> >>> > >>> data-center >> >>> > >>> SV_WTC >> >>> > >>> 2014-11-24 18:05:33,817 INFO >> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START, >> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned, >> >>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false), log id: >> >>> > >>> 1cbc7311 >> >>> > >>> 2014-11-24 18:05:33,820 INFO >> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH, >> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311 >> >>> > >>> 2014-11-24 18:05:34,086 INFO >> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished. Lock >> >>> > >>> released. >> >>> > >>> Monitoring can run now for host Compute5 from data-center >> >>> > >>> SV_WTC >> >>> > >>> 2014-11-24 18:05:34,088 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: 287d570d, >> >>> > >>> Job >> >>> > >>> ID: >> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null, Custom >> >>> > >>> Event ID: >> >>> > >>> -1, Message: Host Compute5 was activated by admin. >> >>> > >>> 2014-11-24 18:05:34,090 INFO >> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object >> >>> > >>> EngineLock >> >>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a >> >>> > >>> value: >> >>> > >>> VDS >> >>> > >>> , sharedLocks= ] >> >>> > >>> 2014-11-24 18:05:35,792 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START, >> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = >> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832 >> >>> > >>> 2014-11-24 18:05:37,064 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) START, >> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId = >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, >> >>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log >> >>> > >>> id: >> >>> > >>> 6d560cc2 >> >>> > >>> 2014-11-24 18:05:37,074 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH, >> >>> > >>> GetHardwareInfoVDSCommand, log >> >>> > >>> id: 6d560cc2 >> >>> > >>> 2014-11-24 18:05:37,093 WARN >> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is running >> >>> > >>> with >> >>> > >>> disabled >> >>> > >>> SELinux. >> >>> > >>> 2014-11-24 18:05:37,127 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running command: >> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true. >> >>> > >>> Entities >> >>> > >>> affected >> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >> >>> > >>> 2014-11-24 18:05:37,147 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START, >> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId = >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87 >> >>> > >>> 2014-11-24 18:05:37,164 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH, >> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87 >> >>> > >>> 2014-11-24 18:05:37,189 INFO >> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running command: >> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities affected : >> >>> > >>> ID: >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >> >>> > >>> 2014-11-24 18:05:37,206 INFO >> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START, >> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=NonOperational, >> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED, >> >>> > >>> stopSpmFailureLogged=false), >> >>> > >>> log id: fed5617 >> >>> > >>> 2014-11-24 18:05:37,209 INFO >> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH, >> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617 >> >>> > >>> 2014-11-24 18:05:37,223 ERROR >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: >> >>> > >>> 4a84c4e5, >> >>> > >>> Job >> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack: null, >> >>> > >>> Custom >> >>> > >>> Event >> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on server >> >>> > >>> Compute5. >> >>> > >>> 2014-11-24 18:05:37,243 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: >> >>> > >>> null, >> >>> > >>> Call >> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host >> >>> > >>> Compute5 >> >>> > >>> was >> >>> > >>> set >> >>> > >>> to NonOperational. >> >>> > >>> 2014-11-24 18:05:37,272 INFO >> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running command: >> >>> > >>> HandleVdsVersionCommand internal: true. Entities affected : >> >>> > >>> ID: >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >> >>> > >>> 2014-11-24 18:05:37,274 INFO >> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host >> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already in >> >>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED. >> >>> > >>> SetNonOperationalVds command is skipped. >> >>> > >>> 2014-11-24 18:05:38,065 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH, >> >>> > >>> GlusterVolumesListVDSCommand, return: >> >>> > >>> >> >>> > >>> >> >>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1}, >> >>> > >>> log id: 48a0c832 >> >>> > >>> 2014-11-24 18:05:43,243 INFO >> >>> > >>> >> >>> > >>> >> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>> > >>> (DefaultQuartzScheduler_Worker-35) START, >> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = >> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc >> >>> > >>> ^C >> >>> > >>> [root@ccr01 ~]# >> >>> > >>> >> >>> > >>> Thanks, >> >>> > >>> Punit >> >>> > >>> >> >>> > >>> >> >>> > >>> _______________________________________________ >> >>> > >>> Users mailing >> >>> > >>> >> >>> > >>> listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users >> >>> > >>> >> >>> > >>> >> >>> > >>> >> >>> > >> >> >>> > >> >> >>> > > >> >>> > > >> >>> > >> >> >> >> >> > >> > >> > _______________________________________________ >> > Gluster-users mailing list >> > Gluster-users(a)gluster.org >> > http://supercolony.gluster.org/mailman/listinfo/gluster-users > >