1:41 p.m.
Hi Grzegorz,
- did you configure ovirt-websocket-proxy using engine-setup tool (i.e. is the proxy
deployed on same machine as engine is?)? Or do you have some customized setup?
- is the proxy running and is the host:port of the proxy accessible?
- did you import Certificate Authority (not only engine certificate) into your browser?
- also one _very_ important thing and common mistake: does the Common Name (CN) in
websocket proxy certificate match to the websocket proxy actual location? (this is quite
common error - people have certificate issued for 'my-engine.com' but they are
accessing engine/websocket-proxy via ip address which results in certificate
mismatch...).
Cheers,
Franta.
PS:
There is quite straightforward guide about noVNC on ovirt wiki [1], I suggest taking a
look at it.
[1]: http://www.ovirt.org/Features/noVNC_console
----- Original Message -----
From: "Grzegorz Szypa" <grzegorz.szypa(a)gmail.com>
To: "Michal Skrivanek" <michal.skrivanek(a)redhat.com>, users(a)ovirt.org
Sent: Monday, September 1, 2014 12:45:51 PM
Subject: Re: [ovirt-users] [oVirt 3.5] Problem with connection in noVNC to VM (Connect
timeout)
i trying to do in ovirt 3.5, but now i don't have time and comeback to ovirt 3.4
2014-09-01 12:07 GMT+02:00 Michal Skrivanek < michal.skrivanek(a)redhat.com > :
On Aug 29, 2014, at 03:38 , Punit Dambiwal < hypunit(a)gmail.com > wrote:
Hi,
I haven't try it on 3.5....3.4 it's work...
Thanks,
Punit
On Fri, Aug 29, 2014 at 4:13 AM, Grzegorz Szypa < grzegorz.szypa(a)gmail.com > wrote:
Hi.
I tried to start the connection novnc the new machine, but still the same. Even if I
imported the CA certificate and added it to the trusted
2014-08-27 14:50 GMT+02:00 Grzegorz Szypa < grzegorz.szypa(a)gmail.com >:
Hi.
I try do someting and I change to line in: /usr/share/novnc/include/rfb.js
def_con_timeout = Websock_native ? 2 : 5, --> def_con_timeout = Websock_native ? 5 :
15,
['disconnectTimeout', 'rw', 'int', 3, 'Time (s) to wait for
disconnection'], --> ['disconnectTimeout', 'rw', 'int', 5,
'Time (s) to wait for disconnection'],
And,
Before change i get error: Connect timeout
After change i get error: Server disconnected (code: 1006)
are you running the websocket-proxy service on the engine host?
firewall maybe?
did you change any configuration from the default (default is on engine:6100)?
Thanks,
michal
2014-08-27 14:15 GMT+02:00 Grzegorz Szypa < grzegorz.szypa(a)gmail.com >:
Why port 6100. It's not working or maybe it's nothing show.
2014-08-27 14:04 GMT+02:00 Punit Dambiwal < hypunit(a)gmail.com >:
Hi,
Are you using the valid SSL or Self signed ??
If self-signed then you need to trust this ssl in to your browser first...so please open
the following in to another tab of your browser and run the following https://engine:6100
and accept the certificate and close this tab...
Now click on the console...it should work...
Thanks,
Punit
On Wed, Aug 27, 2014 at 7:56 PM, Grzegorz Szypa < grzegorz.szypa(a)gmail.com > wrote:
Hi.
Maybe you could help me with noVNC to VM. I get a error: "Connect timeout"
Do I need to install separately VNC server ?? or noVNC
--
G.Sz.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
G.Sz.
--
G.Sz.
--
G.Sz.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
G.Sz.
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users