8:51 p.m.
On Tue, 2012-01-17 at 12:39 -0500, Dominic Kaiser wrote:
Thanks all,
I have tried the new ovirt node 2.2.1-3 nightly build today and it
finally recognized my realtek nic card. So I have moved to try to get
node to install. Still a fail I might add. It adds to the ovirt gui
but fails install and says the ovirt hyperviser is not a supported
platform. That is kind of funny since it is fedora 16. And yes I had
edited the vdsm.conf by hand was that wrong to do? Should I have used
vi instead? I would like to get ovirt node running since it is
working now lighter install. This is what I get:
2012-Jan-17, 12:28:59
Failed to install Host
vm3.bostonvineyard.org.
Step: INSTALLER;
Details: Unsupported
platform:
oVirtNodeHypervisor.
If it registers from ovirt node should it not show up in the ovirt
Management gui? Or do you still have to add it as usual? So that is
what I did and that is the error I recieved.
oVirt Node supports 2 ways of registering.
1. Set the hostname and port of the management server
The Node registers itself to the engine and the admin then only has to
approve it.
2. Set a password and use add host from the engine
The node does no registration. The admin for engine manually adds the
node as they would a regular Fedora node.
As for the actual error, I've seen other problems with that build of
ovirt-node that I'm working on so I haven't tried to register it yet.
I'll try it though.
Mike
Let me know what you think,
Dominic
On Tue, Jan 17, 2012 at 11:46 AM, Doron Fediuck <dfediuck(a)redhat.com>
wrote:
On Tuesday 17 January 2012 11:31:43 Dominic Kaiser wrote:
> Ok here are the log files. It installs most packages and
then hangs up on
> libjpeg? libjpeg is installed including dev package. This
is a bare-metal
> node running fedora 16 with vdsm packages installed from
repo. Your node
> .iso 2.2.1 does not initialize realtek nic cards so I can
not use that.
> The 2.2.1 .iso sees the nic card but that is it. So I went
the route of
> installing the full fedora 16 distro and installing vdsm
packages from
> repo. I am bridged correctly and ssl=false in the
vdsm.conf. Now when I
> go to the ovirt management gui and install the node it fails
at this step.
> I can see the node in ovirt management gui just an fyi so
not a problem
> with detection. It seems that the vdsm server will not
start due to
> libjpeg install failure but mabey I am wrong.
>
> Let me know what you think,
>
> Dominic
>
Hi Dominic,
This is where your installation fails:
ParsingError: File contains parsing
errors: /etc/vdsm/vdsm.conf
[line 42]: ' default_bridge = engine\n'
[line 93]: ' ssl = false\n'
[line 191]: ' management_port = 54321\n'
[line 193]: ' management_ip = 10.3.0.245\n'
Sun, 15 Jan 2012 08:01:27 DEBUG <BSTRAP
component='CreateConf' status='FAIL' message='Basic
configuration failed'/>
Now I'm wondering how did you edit /etc/vdsm/vdsm.conf?
Did you really add a string '\n' or is it just the way the
error propmts?
--
/d
"Air conditioned environment - Do NOT open Windows!"
--
Dominic Kaiser
Greater Boston Vineyard
Director of Operations
cell: 617-230-1412
fax: 617-252-0238
email: dominic(a)bostonvineyard.org
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users