11:06 p.m.
----- Original Message -----
From: "Wout Peeters" <wout(a)unix-solutions.be>
To: emesika(a)redhat.com
Cc: users(a)ovirt.org
Sent: Monday, December 8, 2014 12:01:10 PM
Subject: Fwd: [ovirt-users] oVirt power management issue
Hi Eli,
Thanks for the response. Attached are engine.log and vdsm.log from the host
serving as a proxy. Our CPUs are Intel Nehalem-based. We encounter the same
problem using apc_snmp. This is the output of the rpm-commands:
rpm -qa | grep vdsm
vdsm-yajsonrpc-4.16.7-1.gitdb83943.el7.noarch
vdsm-4.16.7-1.gitdb83943.el7.x86_64
vdsm-xmlrpc-4.16.7-1.gitdb83943.el7.noarch
vdsm-python-zombiereaper-4.16.7-1.gitdb83943.el7.noarch
vdsm-jsonrpc-4.16.7-1.gitdb83943.el7.noarch
vdsm-cli-4.16.7-1.gitdb83943.el7.noarch
vdsm-python-4.16.7-1.gitdb83943.el7.noarch
rpm -qa | grep fence-agents
fence-agents-hpblade-4.0.2-21.el7.x86_64
fence-agents-cisco-ucs-4.0.2-21.el7.x86_64
fence-agents-eaton-snmp-4.0.2-21.el7.x86_64
fence-agents-apc-4.0.2-21.el7.x86_64
fence-agents-rsb-4.0.2-21.el7.x86_64
fence-agents-ilo-mp-4.0.2-21.el7.x86_64
fence-agents-ifmib-4.0.2-21.el7.x86_64
fence-agents-cisco-mds-4.0.2-21.el7.x86_64
fence-agents-all-4.0.2-21.el7.x86_64
fence-agents-common-4.0.2-21.el7.x86_64
fence-agents-rhevm-4.0.2-21.el7.x86_64
fence-agents-eps-4.0.2-21.el7.x86_64
fence-agents-bladecenter-4.0.2-21.el7.x86_64
fence-agents-intelmodular-4.0.2-21.el7.x86_64
fence-agents-apc-snmp-4.0.2-21.el7.x86_64
fence-agents-ilo2-4.0.2-21.el7.x86_64
fence-agents-ipmilan-4.0.2-21.el7.x86_64
fence-agents-scsi-4.0.2-21.el7.x86_64
fence-agents-brocade-4.0.2-21.el7.x86_64
fence-agents-wti-4.0.2-21.el7.x86_64
fence-agents-kdump-4.0.2-21.el7.x86_64
fence-agents-ibmblade-4.0.2-21.el7.x86_64
fence-agents-ipdu-4.0.2-21.el7.x86_64
fence-agents-vmware-soap-4.0.2-21.el7.x86_64
fence-agents-drac5-4.0.2-21.el7.x86_64
Kind regards,
Wout
Have seen few resolved bugs on that , can you please let us know what is the cluster level
version in which the proxy host resides ?
----- Oorspronkelijk bericht -----
Van: "Eli Mesika" <emesika(a)redhat.com>
Aan: "Wout Peeters" <wout(a)unix-solutions.be>
Cc: users(a)ovirt.org
Verzonden: Maandag 8 december 2014 00:17:13
Onderwerp: Re: [ovirt-users] oVirt power management issue
----- Original Message -----
> From: "Eli Mesika" <emesika(a)redhat.com>
> To: "Wout Peeters" <wout(a)unix-solutions.be>
> Cc: users(a)ovirt.org
> Sent: Monday, December 8, 2014 1:14:54 AM
> Subject: Re: [ovirt-users] oVirt power management issue
>
>
>
> ----- Original Message -----
> > From: "Wout Peeters" <wout(a)unix-solutions.be>
> > To: users(a)ovirt.org
> > Sent: Friday, December 5, 2014 12:50:24 PM
> > Subject: [ovirt-users] oVirt power management issue
> >
> > Hi,
> >
> > We're trying to set up an oVirt configuration with an oVirt-controller
> > (CentOS 6), iSCSI-storage (Dell MD3200i) and 3 vm-hosts (CentOS 7)
> > powered
> > by 2 APC PDUs. Testing the Power Management settings in the web GUI, we
> > get
> > the following message: "Test Succeeded, unknown." The oVirt engine
log
> > outputs the following:
> >
> > 2014-12-05 11:23:00,872 INFO
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom
> > Event
> > ID: -1, Message: Host vm-02 from data center XXXX was chosen as a proxy
> > to
> > execute Status command on Host vm-03.
> > 2014-12-05 11:23:00,879 INFO [org.ovirt.engine.core.bll.FenceExecutor]
> > (ajp--127.0.0.1-8702-7) Using Host vm-02 from data center XXXX as proxy
> > to
> > execute Status command on Host
> > 2014-12-05 11:23:00,904 INFO [org.ovirt.engine.core.bll.FenceExecutor]
> > (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command,
> > Proxy
> > Host:vm-02, Agent:apc, Target Host:, Management IP:***.***.***.***,
> > User:apc, Options:, Fencing policy:null
> > 2014-12-05 11:23:00,930 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-02,
> > HostId
> > =
> > 071554fc-eed2-4e8f-b6bc-041248d0eaa5, targetVdsId =
> > 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip =
> > ***.***.***.***,
> > port = , type = apc, user = apc, password = ******, options = '',
policy
> > =
> > 'null'), log id: 2803522
> > 2014-12-05 11:23:01,137 WARN
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom
> > Event
> > ID: -1, Message: Power Management test failed for Host vm-03.Done
> > 2014-12-05 11:23:01,138 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test
> > Succeeded,
> > unknown, log id: 2803522
> > 2014-12-05 11:23:01,139 WARN [org.ovirt.engine.core.bll.FenceExecutor]
> > (ajp--127.0.0.1-8702-7) Fencing operation failed with proxy host
> > 071554fc-eed2-4e8f-b6bc-041248d0eaa5, trying another proxy...
> > 2014-12-05 11:23:01,241 INFO
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom
> > Event
> > ID: -1, Message: Host vm-01 from data center XXXX was chosen as a proxy
> > to
> > execute Status command on Host vm-03.
> > 2014-12-05 11:23:01,244 INFO [org.ovirt.engine.core.bll.FenceExecutor]
> > (ajp--127.0.0.1-8702-7) Using Host vm-01 from data center XXXX as proxy
> > to
> > execute Status command on Host
> > 2014-12-05 11:23:01,246 INFO [org.ovirt.engine.core.bll.FenceExecutor]
> > (ajp--127.0.0.1-8702-7) Executing <Status> Power Management command,
> > Proxy
> > Host:vm-01, Agent:apc, Target Host:, Management IP:***.***.***.***,
> > User:apc, Options:, Fencing policy:null
> > 2014-12-05 11:23:01,273 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > (ajp--127.0.0.1-8702-7) START, FenceVdsVDSCommand(HostName = vm-01,
> > HostId
> > =
> > c50eb9bf-5294-4d46-813d-7adfcb41d71d, targetVdsId =
> > 67c642ed-0a7a-4e3b-8dd6-32a36df4aea9, action = Status, ip =
> > ***.***.***.***,
> > port = , type = apc, user = apc, password = ******, options = '',
policy
> > =
> > 'null'), log id: 2b00de15
> > 2014-12-05 11:23:01,449 WARN
> > [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> > (ajp--127.0.0.1-8702-7) Correlation ID: null, Call Stack: null, Custom
> > Event
> > ID: -1, Message: Power Management test failed for Host vm-03.Done
> > 2014-12-05 11:23:01,451 INFO
> > [org.ovirt.engine.core.vdsbroker.vdsbroker.FenceVdsVDSCommand]
> > (ajp--127.0.0.1-8702-7) FINISH, FenceVdsVDSCommand, return: Test
> > Succeeded,
> > unknown, log id: 2b00de15
> >
> > This is the vdsm.log output:
> >
> > JsonRpc (StompReactor)::DEBUG::2014-12-05
> > 11:34:05,065::stompReactor::98::Broker.StompAdapter::(handle_frame)
> > Handling
> > message <StompFrame command='SEND'>
> > JsonRpcServer::DEBUG::2014-12-05
> > 11:34:05,067::__init__::504::jsonrpc.JsonRpcServer::(serve_requests)
> > Waiting
> > for request
> > Thread-24996::DEBUG::2014-12-05 11:34:05,069::API::1188::vds::(fenceNode)
> >
fenceNode(addr=***.***.***.***,port=,agent=apc,user=apc,passwd=XXXX,action=status,secure=False,options=,policy=None)
> > Thread-24996::DEBUG::2014-12-05 11:34:05,069::utils::738::root::(execCmd)
> > /usr/sbin/fence_apc (cwd None)
> > Thread-24996::DEBUG::2014-12-05 11:34:05,131::utils::758::root::(execCmd)
> > FAILED: <err> = "Failed: You have to enter plug number or machine
> > identification\nPlease use '-h' for usage\n"; <rc> = 1
> > Thread-24996::DEBUG::2014-12-05 11:34:05,131::API::1143::vds::(fence) rc
> > 1
> > inp agent=fence_apc
> > ipaddr=***.***.***.***
> > login=apc
> > action=status
> > passwd=XXXX
> > out [] err ['Failed: You have to enter plug number or machine
> > identification', "Please use '-h' for usage"]
> >
> > The 'port' and 'options' fields show up as empty, even if we
enter '22'
> > or
> > 'port=22'. We did enter the slot number as well.
> >
> > Entering the fence_apc command manually, we get:
> >
> > fence_apc -a ***.***.***.*** -l apc -p ****** -o status -n 1 -x
> > Status: ON
> >
> > Anyone have an idea what could be the problem?
>
> Hi, first please attach a full engine log and vdsm.log on the machine that
> served as a proxy for this operation
> Please also attach the result of the following on the machine that served
> as
> a proxy for this operation
>
> rpm -qa | grep vdsm
> rpm -qa | grep fence-agents
>
> Is that a PowerPC machine ???
also, please try to use the apc_snmp instead of apc and see if that resolved
the problem
>
> Thanks
> Eli Mesika
>
>
>
>
> >
> >
> > Thanks for your time and kind regards,
> >
> > Wout
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>