[ovirt-users] Re: oVirt + gluster with JBOD

You could always go expand the volume after deployment by adding more disks to the logical volume it creates. On Wed, Sep 12, 2018, 11:38 PM Jayme <jaymef(a)gmail.com <mailto:jaymef@gmail.com>> wrote: Eduardo, there is one thing you should be aware of.  The jbod disks aren't all pooled together to create one large storage domain. I had to spread my data domains over the devices such as a data domain on /dev/SDA and data2 on sdb etc not a big problem with only two disks per server but with ten it could get ugly  On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral, <emayoral(a)arsys.es <mailto:emayoral@arsys.es>> wrote: Thanks for your answers! Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4 or 5 nodes with 10 disks each -> 40 to 50 bricks. Again, thanks for your help. -- Eduardo Mayoral. On 12/09/18 20:54, Jayme wrote: > Should also note that I am using replica 3 configuration with > no arbiter for extra redundancy. > > On Wed, Sep 12, 2018 at 3:53 PM Jayme <jaymef(a)gmail.com > <mailto:jaymef@gmail.com>> wrote: > > I am running a three server oVirt hyperconverged setup > with JBOD disks.  Two 2TB SSDs in JBOD per server.  The > configuration is working very well for me so far. > > > > On Wed, Sep 12, 2018 at 2:36 PM Donny Davis > <donny(a)fortnebula.com <mailto:donny@fortnebula.com>> wrote: > > JBOD is on the drop down when you do the setup for > the volumes > > On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral > <emayoral(a)arsys.es <mailto:emayoral@arsys.es>> wrote: > > Hi! > >   I am thinking about using some spare servers I > have for a > hyperconverged oVirt + gluster. Only problem with > these servers is that > the RAID card is not specially good, so I am > considering using gluster > in a JBOD configuration. JBOD is supported for > recent versions of > gluster, but I am not sure if this configuration > is supported by oVirt, > or if there are any special considerations I > should take into account. > >     Anyone running oVirt + gluster with JBOD who > can comment on this? > >     Thanks! > > -- > > Eduardo Mayoral. > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > <mailto:users@ovirt.org> > To unsubscribe send an email to > users-leave(a)ovirt.org <mailto:users-leave@ovirt.org> > Privacy Statement: > https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG... > > _______________________________________________ > Users mailing list -- users(a)ovirt.org > <mailto:users@ovirt.org> > To unsubscribe send an email to users-leave(a)ovirt.org > <mailto:users-leave@ovirt.org> > Privacy Statement: > https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S3... >