So I've tried some bits Itamar asked me to - however, still get the same
mount options shown.
I tried "service vdsmd reconfigure; service vdsmd restart" - the mount for
HV03:/vmfs/data should now have the new mount options, but no luck.
Anyone time to help ?
Alex
On 24 January 2013 10:54, Alex Leonhardt <alex.tuxx(a)gmail.com> wrote:
I've got now :
nfs_mount_options = soft,nosharecache,rsize=32768,wsize=32768,noatime
However, when I check the mounts on the host, it does not show these
addtitional options used ? (only soft,nosharecache), here the mount output:
HV02:/vmfs/data.old2 on /rhev/data-center/mnt/HV02:_vmfs_data.old2 type
nfs (rw,soft,nosharecache,timeo=600,retrans=6,nfsvers=3,addr=x.x.x8)
HV02:/vmfs/data on /rhev/data-center/mnt/HV02:_vmfs_data type nfs
(rw,soft,nosharecache,timeo=600,retrans=6,vers=3,addr=x.x.x8)
HV03:/vmfs/data on /rhev/data-center/mnt/HV03:_vmfs_data type nfs
(rw,soft,nosharecache,timeo=600,retrans=6,nfsvers=3,addr=127.0.0.1)
Above is after I restarted HV03 so it really should have mounted
HV03:/vmfs/data with the new options
another question would be if "nolock" would be a good idea as it seems
that nfs ops are sometimes being blocked by a lock ? at least, it behaves
as if .. i havent further investigated yet.
Alex
On 23 January 2013 13:27, Itamar Heim <iheim(a)redhat.com> wrote:
> On 22/01/2013 11:43, Haim Ateya wrote:
>
>> you can set it manually on each hypervisor by using vdsm.conf.
>>
>> add the following into /etc/vdsm/vdsm.conf
>>
>> [irs]
>> nfs_mount_options = soft,nosharecache
>>
>> restart vdsmd service on the end.
>>
>
> you can also set them via a posixfs storage domain, but for nfs, an nfs
> storage domain is recommended over a posixfs one.
> question is what is the use case for them, and should they be added for
> nfs domains as well.
>
>
>
>> ----- Original Message -----
>>
>>> From: "Alex Leonhardt" <alex.tuxx(a)gmail.com>
>>> To: "oVirt Mailing List" <users(a)ovirt.org>
>>> Sent: Tuesday, January 22, 2013 1:46:56 AM
>>> Subject: [Users] custom nfs mount options
>>>
>>>
>>>
>>>
>>>
>>> Hi,
>>>
>>> Is it possible set custom nfs mount options, specifically : noatime,
>>> wsize and rsize ? I couldnt see anything when "adding a NFS
domain"
>>> - only timeout & retry.
>>>
>>>
>>> Thanks!
>>> Alex
>>>
>>>
>>>
>>>
>>>
>>> --
>>>
>>>
>>>
>>> | RHCE | Senior Systems Engineer |
www.vcore.co |
>>> |
www.vsearchcloud.com |
>>>
>>> ______________________________**_________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>>>
>>> ______________________________**_________________
>> Users mailing list
>> Users(a)ovirt.org
>>
http://lists.ovirt.org/**mailman/listinfo/users<http://lists.ovirt.org...
>>
>>
>
--
| RHCE | Senior Systems Engineer |
www.vcore.co |
www.vsearchcloud.com |