Re: [Users] Adding oVirt Node Fails

On 03/05/12 06:40, Itamar Heim wrote: > On 05/03/2012 04:29 AM, Nicholas Kesick wrote: >> Update: Please see my previous email and attachments as that may provide >> more info still. >> >> I manually renamed the bridge from breth0 to ovirtmgmt (edited >> /etc/sysconfig/network-scripts/ifcfg-eth0, copied >> /etc/sysconfig/network-scripts/ifcfg-breth0 to ifcfg-ovirtmgmt) then >> connected the network in the TUI and it came up correctly. Added the >> host, then tried approving it. So the error about not being able to >> rename the bridge disappeared, and it now shows in vdsm-reg.log that it >> got as far as copying engine.ssh.key.txt... but the manager still >> reports that "Failed to install Host Fedora16: Step: instCert", "Host >> Fedora16 was successfully approved" and host status of "Install failed". >> >> I've attached the contents of /var/log/vdsm-reg/* and /tmp/vds_* and a >> screenshot of the event log from the manager. > > this seems the relevant part from log: > Thu, 26 Apr 2012 06:57:04 DEBUG instCert: failed. > Traceback (most recent call last): > File "/usr/share/vdsm-reg/deployUtil.py", line 1133, in instCert > File "/usr/share/vdsm-reg/deployUtil.py", line 1098, in pkiCleanup > OSError: [Errno 16] Device or resource busy: '/etc/pki/vdsm/certs/cacert.pem' > > have you tried rebooting the host between tries to clear potential issues? > doron? > Good observation. Added Mike, as this is a node issue. I suggest you reboot and check if the same issue occurs. If so, you'll need Mike's help on that.

>> >> - Nick >> ------------------------------------------------------------------------ >> From: cybertimber2000(a)hotmail.com >> To: dfediuck(a)redhat.com >> Date: Wed, 2 May 2012 17:59:08 -0400 >> CC: users(a)ovirt.org >> Subject: Re: [Users] Adding oVirt Node Fails >> >> Douglas, >> >> This happens after the approval part. So after I click approve is when >> it says the install cert failed, then reports that the approval suceeded >> (in events), but that the installation failed (in host status). >> Looking into the SSH keys, but I have attached the /var/log/vdsm-reg/* >> files from the node in question. It still seems to imply issues with >> renaming the bridge, so I'm looking into that now. >> >> I also cleared out and reset /root/.ssh/authorized_keys on the node, but >> no dice there. Maybe the first time it wasn't populated, hence the >> failed to read? >> >> - Nick >> >> >> > Date: Wed, 2 May 2012 13:28:26 +0300 >> > From: dfediuck(a)redhat.com >> > To: cybertimber2000(a)hotmail.com >> > CC: dougsland(a)redhat.com; users(a)ovirt.org >> > Subject: Re: [Users] Adding oVirt Node Fails >> > >> > Hi Nick, >> > You managed to add one log which complains about: >> > Tue, 01 May 2012 18:00:18 DEBUG Failed to read /root/.ssh/authorized_keys >> > >> > Can you check this file inside your host? >> > >> > Also, it seems that you're adding it via the UI (New host), while >> such hosts >> > in most cases will register if properly configured, and show up with >> PendingApproval >> > status in the UI. >> > So please add the logs you have in the host under /var/log/vdsm-reg/ >> > >> > >> > On 02/05/12 01:12, Nicholas Kesick wrote: >> > > Douglas, >> > > >> > > VDSM is version 3.9.3.3. I'm not sure which error message you are >> refering to, but I attached the events from oVirt Manager as well as >> /tmp/vds_* from the node. >> > > >> > > Thanks, >> > > - Nick >> > > >> > > >> > > >> ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------!

-! >> > --- >> > > Date: Tue, 1 May 2012 00:53:52 -0400 >> > > From: dougsland(a)redhat.com >> > > To: users(a)ovirt.org >> > > CC: cybertimber2000(a)hotmail.com >> > > Subject: Re: [Users] Adding oVirt Node Fails >> > > >> > > Hi Nicholas, >> > > >> > > On 04/30/2012 10:56 PM, Nicholas Kesick wrote: >> > > >> > > It's called "breth0". I've been tempted to rename it manually, but >> my understanding is that it's not persistant. Worth testing though. >> > > dougsland, jboggs said you may know something about this being a >> bug in the stable version and is fixed in nightlies? >> > > >> > > >> > > Can you please share your vdsm version and the full error message? >> /tmp/vds_* files would be nice too >> > > >> > > Here a patch that might help: >> http://gerrit.ovirt.org/#patch,sidebyside,3615,5,vdsm/configNetwork.py >> <http://gerrit.ovirt.org/#patch%2csidebyside%2c3615%2c5%2cvdsm/configNetwo... >> (already merged into vdsm tree) >> > > >> > > >> > > Thanks! >> > > >> > > -- >> > > Cheers >> > > Douglas >> > > >> > > >> > > >> > > _______________________________________________ >> > > Users mailing list >> > > Users(a)ovirt.org >> > > http://lists.ovirt.org/mailman/listinfo/users >> > >> > >> > -- >> > >> > /d >> > >> > "Willyoupleasehelpmefixmykeyboard?Thespacebarisbroken!" >> >> _______________________________________________ Users mailing list >> Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >