On March 25, 2020 5:22:53 PM GMT+02:00, "Maton, Brett"
<matonb(a)ltresources.co.uk> wrote:
There's an extra tab 'OS Pass through'...
https://www.dell.com/community/Systems-Management-General/R630-Idrac-ethe...
I just disabled the pass through on one of my servers.
On the command line 'idrac' disappeared immediately from the output of
'ip
a', but remained in ovirt.
Putting the server in to maintenance mode and rebooting did remove the
iDRAC interface from the oVirt UI once the host was reactivated.
Hope this helps
Regards,
Brett
On Wed, 25 Mar 2020 at 13:22, Nathanaël Blanchet <blanchet(a)abes.fr>
wrote:
> Thanks for replying,
>
> I know this setting, but I do want to use the dedicated nic.
>
> The curious thing is that the MAC adress of the dedicated NIC into
IDRAC
> setting differs from the MAC reported into ovirt:
>
> So it lest me suppose that there is a kind of virtual card derived
from
> the physical one, can anybody confirm this?
> Le 25/03/2020 à 13:02, Maton, Brett a écrit :
>
> Can't say that I've tried it, but it looks like it's a setting within
iDRAC
>
> This link is for iDRAC 8, but it's probably similar for 7 and 9...
>
>
https://www.dell.com/community/PowerEdge-Hardware-General/iDRAC-8-NIC-Por...
>
>
> On Wed, 25 Mar 2020 at 09:33, Nathanaël Blanchet <blanchet(a)abes.fr>
wrote:
>
>> Hello,
>>
>> I noticed an idrac interface was available in the host network since
an
>> undefined ovirt version.
>>
>> Mine are already plugged as dedicated vlan to administrate host at
the
>> lowest level.
>>
>> I tested to use it as a vm network on the same vlan, but it doesn't
work.
>>
>> What am I supposed to do with this available interface?
>>
>> PS: on HP hosts, no Ilo interface appears in host network tab
>>
>> --
>> Nathanaël Blanchet
>>
>> Supervision réseau
>> SIRE
>> 227 avenue Professeur-Jean-Louis-Viala
>> 34193 MONTPELLIER CEDEX 5
>> Tél. 33 (0)4 67 54 84 55
>> Fax 33 (0)4 67 54 84 14
>> blanchet(a)abes.fr
>> _______________________________________________
>> Users mailing list -- users(a)ovirt.org
>> To unsubscribe send an email to users-leave(a)ovirt.org
>> Privacy Statement:
https://www.ovirt.org/privacy-policy.html
>> oVirt Code of Conduct:
>>
https://www.ovirt.org/community/about/community-guidelines/
>> List Archives:
>>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/UP6WTZIH7YT...
>>
> --
> Nathanaël Blanchet
>
> Supervision réseau
> SIRE
> 227 avenue Professeur-Jean-Louis-Viala
> 34193 MONTPELLIER CEDEX 5
> Tél. 33 (0)4 67 54 84 55
> Fax 33 (0)4 67 54 84 14blanchet(a)abes.fr
>
>
You need to go to the Hosts tab and run a 'Refresh Capabilities' from the Manage
drop-down.
I use it when I plug USB devices for pass-through.
Best Regards,
Strahil Nikolov