11:16 a.m.
Blacklisting the disks in multipath.conf did the trick, all good now.
When adding a new host, the process should run that blacklist all disks shell script like
the cockpit deploy does… if I may be so bold to suggest 😊
From: Jayme [mailto:jaymef@gmail.com]
Sent: Tuesday, July 31, 2018 9:48 AM
To: Gobinda Das <godas(a)redhat.com>
Cc: William Dossett <william.dossett(a)gmail.com>; Bill Dossett
<bill.dossett(a)pb.com>; users <users(a)ovirt.org>
Subject: Re: [ovirt-users] Re: adding hosts problems with GlusterFS
Try doing a multipath -ll and if that displays anything try flushing with multipath -F
On Tue, Jul 31, 2018 at 10:55 AM, Gobinda Das <godas(a)redhat.com
<mailto:godas@redhat.com> > wrote:
Is the brick creation failing from UI? Can you run "gluster volume status" and
check brick created or not?
If bricks creation failing then Looks like multipath is causing issue.I think you need to
clear multipath entries and try.
On Tue, Jul 31, 2018 at 7:01 PM, William Dossett <william.dossett(a)gmail.com
<mailto:william.dossett@gmail.com> > wrote:
Yeah, for sure, I think I made it over my last one yesterday…. Going to start building out
my storage today. I had to get down into the OS and work with the logical volume manager
commands a bit to clean up some of my mess and also figured out how to blacklist the disks
on my 4th and 5th host from multipath…. So that’s encouraging… if you need a hand feel
free to ping me.
From: Jayme [mailto:jaymef@gmail.com <mailto:jaymef@gmail.com> ]
Sent: Tuesday, July 31, 2018 5:11 AM
To: Bill Dossett <bill.dossett(a)pb.com <mailto:bill.dossett@pb.com> >
Cc: users <users(a)ovirt.org <mailto:users@ovirt.org> >
Subject: [ovirt-users] Re: adding hosts problems with GlusterFS
I think we are in a race to see who can get a new HCI setup built faster. There have been
a few hurtles along the way :)
On Tue, Jul 31, 2018, 6:53 AM Bill Dossett, <bill.dossett(a)pb.com
<mailto:bill.dossett@pb.com> > wrote:
Hmm, resounding silence…. Have attached a screen shot of the host storage devices on the
host I added after the initial deployment. So at the bottom you can see that sdb – sdg
are all locked and FS type is multipath_member those all equate to the UID type NAME at
the top. The very top row, I created a brick, so it is also now locked, however when I go
to brick view there is no brick. I also can’t seem to delete any brick one it is created
either. On the first 3 hosts, sdb – sdg are all unlocked and I can create bricks… going
to remove a host and re-add it to see if there is anything I am missing, but I don’t have
any other ideas at this point.
Regards, Bill
Bill Dossett
DevOps Ninja
<https://aws.amazon.com/certification/certified-devops-engineer-profession...
AWS-DevOps-Pro,
<https://aws.amazon.com/certification/certified-solutions-architect-associ...
AWS-SA-A <http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30483&ui=www_cert>
VCAP-DCA, <http://mylearn.vmware.com/mgrReg/plan.cfm?plan=30484&ui=www_cert>
VCAP-DCD, MCSA Win Server
IT – Software Innovation Solutions
M +1 303-725 8163
bill.dossett(a)pb.com <mailto:bill.dossett@pb.com>
<http://pitneybowes.com> pitneybowes.com
Pitney Bowes
4750 Walnut Street
<https://maps.google.com/?q=4750+Walnut+Street+Boulder+CO,+80301&entry...
Boulder CO, 80301
<https://maps.google.com/?q=4750+Walnut+Street+Boulder+CO,+80301&entry...
<http://teamsite.inside.pb.com/sites/TCPPM/GES/SitePages/Home.aspx> Learn more
about Software Innovation Solutions
In Engineering, Software Support or Professional Services?
Raise a ticket via Remedy Anywhere [
<http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident/new...
HERE] takes less than a minute
CloudForms User Guide available [
<https://teamsite.inside.pb.com/sites/TCPPM/GES/SiteAssets/TC%20Knowledge%...
HERE]
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/AR3D4HLVTAQ...
_______________________________________________
Users mailing list -- users(a)ovirt.org <mailto:users@ovirt.org>
To unsubscribe send an email to users-leave(a)ovirt.org <mailto:users-leave@ovirt.org>
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/WOGYCVC5YLE...
--
Thanks,
Gobinda