Re: [Users] ovirtmgmt not installed

----- Original Message ----- > From: "Assaf Muller" <amuller(a)redhat.com&gt; > To: "Pascal Jakobi" <pjakobi(a)yahoo.fr&gt; > Cc: users(a)ovirt.org > Sent: Wednesday, December 4, 2013 9:09:18 AM > Subject: Re: [Users] ovirtmgmt not installed > > I personally have a F19 host working against 3.3 engine. Could you detail > what doesn't work, and possibly attach engine and VDSM logs when an > operation fails? It seems to be an instance of https://bugzilla.redhat.com/show_bug.cgi?id=973179 Anaconda created a wrongly named and wrongly configured ifcfg file. biosdevname said the device is em1 but the ifcfg file created by anaconda is ifcfg-eno1 (and the content refers to that name). The best way to solve this is to create an ifcfg file from scratch like the following: DEVICE=em1 BOOTPROTO=dhcp ONBOOT=yes NM_CONTROLLED=no HWADDR=XX:XX:XX:XX:XX:XX # replace X with em1's HWADDR Then for extra safety, stop and mask Network Manager. And then deploy. > > Assaf Muller, Cloud Networking Engineer > Red Hat > > ----- Original Message ----- > From: "Pascal Jakobi" <pjakobi(a)yahoo.fr&gt; > To: users(a)ovirt.org > Sent: Wednesday, December 4, 2013 8:22:05 AM > Subject: Re: [Users] ovirtmgmt not installed > > At the end, I could not make an F19 Fedora host work against a 3.3 engine. I > suggest someone from the eng team has a look at it. some stuff just does not > work there. > > Therefore, I downgraded the fedora host to F18. On the engine side, I got the > following error message : > Host lab2 is compatible with versions (3.0,3.1,3.2) and cannot join Cluster > Default which is set to version 3.3. > Don't know what is to be set.... > > Anyway, I created a 3.2 cluster and installed the host into it. Seems to work > (the host is up). > > Thanks again for support. > > > Pascal Jakobi > 116 rue de Stalingrad > 93100 Montreuil, France > Tel : + 33 6 87 47 58 19 > @ : pjakobi(a)yahoo.fr > > > Le Mardi 3 décembre 2013 14h04, Pascal Jakobi <pjakobi(a)yahoo.fr&gt; a écrit : > Will do within a couple of hours. > Many, many thanks > Pascal Jakobi > 116 rue de Stalingrad > 93100 Montreuil, France > Tel : + 33 6 87 47 58 19 > @ : pjakobi(a)yahoo.fr > > > Le Mardi 3 décembre 2013 13h43, Antoni Segura Puimedon < asegurap(a)redhat.com&gt; > a écrit : > Hi Pacal, > > Would you mind joining #ovirt at irc.oftc.net and pinging apuimedo? > I have some questions that could be faster solved online. > > Best, > > Antoni > > ----- Original Message ----- > > From: "Pascal Jakobi" < pjakobi(a)yahoo.fr > > > To: "Pascal Jakobi" < pascal.jakobi(a)gmail.com >, "Moti Asayag" < > > masayag(a)redhat.com > > > Cc: users(a)ovirt.org > > Sent: Tuesday, December 3, 2013 1:11:36 PM > > Subject: Re: [Users] ovirtmgmt not installed > > > > Still the same, even with networking working like a charm... > > Any idea ? > > > > [ root@lab2 vdsm]# vdsClient -s 0 getVdsCaps > > HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName': > > 'iqn.1994-05.com.redhat:a0bc8a5f9a5d'}]} > > ISCSIInitiatorName = 'iqn.1994-05.com.redhat:a0bc8a5f9a5d' > > bondings = {'bond0': {'addr': '', > > 'cfg': {}, > > 'hwaddr': '96:9d:8f:27:e1:8f', > > 'ipv6addrs': [], > > 'mtu': '1500', > > 'netmask': '', > > 'slaves': []}} > > bridges = {} > > clusterLevels = ['3.0', '3.1', '3.2', '3.3'] > > cpuCores = '4' > > cpuFlags = > > 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge' > > cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz' > > cpuSockets = '1' > > cpuSpeed = '3708.000' > > cpuThreads = '8' > > emulatedMachines = ['pc', > > 'q35', > > 'isapc', > > 'pc-0.10', > > 'pc-0.11', > > 'pc-0.12', > > 'pc-0.13', > > 'pc-0.14', > > 'pc-0.15', > > 'pc-1.0', > > 'pc-1.1', > > 'pc-1.2', > > 'pc-1.3', > > 'none'] > > guestOverhead = '65' > > hooks = {} > > kvmEnabled = 'true' > > lastClient = '192.168.1.41' > > lastClientIface = 'em1' > > management_ip = '0.0.0.0' > > memSize = '16001' > > netConfigDirty = 'True' > > networks = {} > > nics = {'em1': {'addr': '192.168.1.42', > > 'cfg': {}, > > 'hwaddr': '00:1a:6b:51:de:b4', > > 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'], > > 'mtu': '1500', > > 'netmask': '255.255.255.0', > > 'speed': 100}} > > operatingSystem = {'name': 'Fedora', 'release': '4', 'version': '19'} > > packages2 = {'kernel': {'buildtime': 1384978944.0, > > 'release': '200.fc19.x86_64', > > 'version': '3.11.9'}, > > 'libvirt': {'buildtime': 1384730741, > > 'release': '2.fc19', > > 'version': '1.0.5.7'}, > > 'mom': {'buildtime': 1375215820, 'release': '3.fc19', 'version': '0.3.2'}, > > 'qemu-img': {'buildtime': 1383700301, > > 'release': '13.fc19', > > 'version': '1.4.2'}, > > 'qemu-kvm': {'buildtime': 1383700301, > > 'release': '13.fc19', > > 'version': '1.4.2'}, > > 'spice-server': {'buildtime': 1383130020, > > 'release': '3.fc19', > > 'version': '0.12.4'}, > > 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', 'version': > > '4.13.0'}} > > reservedMem = '321' > > software_revision = '11' > > software_version = '4.13' > > supportedENGINEs = ['3.0', '3.1', '3.2', '3.3'] > > supportedProtocols = ['2.2', '2.3'] > > uuid = '0A583269-811F-E211-AA06-001A6B51DEB4' > > version_name = 'Snow Man' > > vlans = {} > > vmTypes = ['kvm'] > > [ root@lab2 vdsm]# > > > > > > Pascal Jakobi > > 116 rue de Stalingrad > > 93100 Montreuil, France > > Tel : + 33 6 87 47 58 19 > > @ : pjakobi(a)yahoo.fr > > > > > > Le Lundi 2 décembre 2013 10h31, Pascal Jakobi < pascal.jakobi(a)gmail.com > a > > écrit : > > As a matter of fact, when I installed F19, it created an eno1 device, > > aliased > > to em1. Don't know why, yet. > > Even adding a "GATEWAY" clause in /etc/sysconfig/network does not seem to > > change the problem.... > > > > Will check how to change the device name. > > > > > > 2013/12/1 Moti Asayag < masayag(a)redhat.com > > > > > > > Hi Pascal, > > > > ----- Original Message ----- > > > From: "Pascal Jakobi" < pascal.jakobi(a)gmail.com > > > > To: "Mike Kolesnik" < mkolesni(a)redhat.com > > > > Cc: users(a)ovirt.org , masayag(a)redhat.com > > > Sent: Sunday, December 1, 2013 10:58:40 AM > > > Subject: Re: ovirtmgmt not installed > > > > > > Mike > > > > > > Here you go. However, please note that I must investigate the connection > > > issue that Alon saw. will do it tomorrow. > > > Many thanks to you folks. > > > P > > > > According to the output of 'nics' element, the 'em1' device is missing his > > default gateway entry under the 'cfg' element. > > > > One reason for that can be there is no > > '/etc/sysconfig/network-scripts/ifcfg-em1' > > file and vdsm fails to obtain the default gateway for it. > > > > Could you create this file by your own and retry installing the host ? > > After creating the file (make sure it contains NM_CONTROLLED=no), restart > > the > > network service > > and run 'vdsClient -s 0 getVdsCaps' to make sure 'em1' output contains the > > data its 'cfg' sub- > > element. > > > > > > > > [ root@lab2 ~]# vdsClient -s 0 getVdsCaps > > > HBAInventory = {'FC': [], 'iSCSI': [{'InitiatorName': > > > 'iqn.1994-05.com.redhat:eea1322229a8'}]} > > > ISCSIInitiatorName = 'iqn.1994-05.com.redhat:eea1322229a8' > > > bondings = {'bond0': {'addr': '', > > > 'cfg': {}, > > > 'hwaddr': 'fa:7e:79:56:5a:c2', > > > 'ipv6addrs': [], > > > 'mtu': '1500', > > > 'netmask': '', > > > 'slaves': []}} > > > bridges = {} > > > clusterLevels = ['3.0', '3.1', '3.2', '3.3'] > > > cpuCores = '4' > > > cpuFlags = > > > 'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,eagerfpu,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270,model_SandyBridge' > > > cpuModel = 'Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz' > > > cpuSockets = '1' > > > cpuSpeed = '3744.000' > > > cpuThreads = '8' > > > emulatedMachines = ['pc', > > > 'q35', > > > 'isapc', > > > 'pc-0.10', > > > 'pc-0.11', > > > 'pc-0.12', > > > 'pc-0.13', > > > 'pc-0.14', > > > 'pc-0.15', > > > 'pc-1.0', > > > 'pc-1.1', > > > 'pc-1.2', > > > 'pc-1.3', > > > 'none'] > > > guestOverhead = '65' > > > hooks = {} > > > kvmEnabled = 'false' > > > lastClient = '192.168.1.41' > > > lastClientIface = 'em1' > > > management_ip = '0.0.0.0' > > > memSize = '16001' > > > netConfigDirty = 'False' > > > networks = {} > > > nics = {'em1': {'addr': '192.168.1.42', > > > 'cfg': {}, > > > 'hwaddr': '00:1a:6b:51:de:b4', > > > 'ipv6addrs': ['fe80::21a:6bff:fe51:deb4/64'], > > > 'mtu': '1500', > > > 'netmask': '255.255.255.0', > > > 'speed': 100}} > > > operatingSystem = {'name': 'Fedora', 'release': '2', 'version': '19'} > > > packages2 = {'kernel': {'buildtime': 1384978944.0, > > > 'release': '200.fc19.x86_64', > > > 'version': '3.11.9'}, > > > 'libvirt': {'buildtime': 1384730741, > > > 'release': '2.fc19', > > > 'version': '1.0.5.7'}, > > > 'mom': {'buildtime': 1375215820, 'release': '3.fc19', > > > 'version': '0.3.2'}, > > > 'qemu-img': {'buildtime': 1383700301, > > > 'release': '13.fc19', > > > 'version': '1.4.2'}, > > > 'qemu-kvm': {'buildtime': 1383700301, > > > 'release': '13.fc19', > > > 'version': '1.4.2'}, > > > 'spice-server': {'buildtime': 1383130020, > > > 'release': '3.fc19', > > > 'version': '0.12.4'}, > > > 'vdsm': {'buildtime': 1384274283, 'release': '11.fc19', > > > 'version': '4.13.0'}} > > > reservedMem = '321' > > > software_revision = '11' > > > software_version = '4.13' > > > supportedENGINEs = ['3.0', '3.1', '3.2', '3.3'] > > > supportedProtocols = ['2.2', '2.3'] > > > uuid = '0A583269-811F-E211-AA06-001A6B51DEB4' > > > version_name = 'Snow Man' > > > vlans = {} > > > vmTypes = ['kvm'] > > > > > > > > > > > > 2013/12/1 Mike Kolesnik < mkolesni(a)redhat.com > > > > > > > > ------------------------------ > > > > > > > > *Hi there * > > > > > > > > > > > > Hi Pascal, > > > > > > > > > > > > > > > > > > > > *I installed a console on F19, then a F19 host (time 11:09 today).* > > > > > > > > *Everything works fine, apart from the installation of the mgmt network > > > > at > > > > the end. * > > > > *Can someone tell me what's going wrong ?* > > > > > > > > > > > > Can you please send the output of vdsCaps from the host (vdsClient -s 0 > > > > getVdsCaps)? > > > > > > > > > > > > *Thxs in advance* > > > > > > > > *Pascal* > > > > > > > > > > > > > > > > > > > > > -- > > > *Pascal Jakobi* > > > 116 rue de Stalingrad > > > 93100 Montreuil, France > > > > > > * +33 6 87 47 58 19 * Pascal.Jakobi(a)gmail.com > > > > > > > > > > > -- > > Pascal Jakobi > > 116 rue de Stalingrad > > 93100 Montreuil, France > > +33 6 87 47 58 19 > > Pascal.Jakobi(a)gmail.com > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > _______________________________________________ > > Users mailing list > > Users(a)ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users