Re: [ovirt-users] iscsi failover MD3820i

"*Important:* If more than one path access is required, ensure to discover and log in to the target through all the required paths. Modifying a storage domain to add additional paths is currently not supported." This is from the oVirt admin guide, did you discover and login to all the MD3xxxi controllers/portals when you were setting the storage domain up? On Tue, Mar 7, 2017 at 4:43 PM, Marcin Kruk <askifyouneed(a)gmail.com&gt; wrote: > Hello I have got Dell MD3820i and four interfaces which was connected to > the hostst via switches. > > But there is only one IP which I can set during the configuration of > iSCSI RHV storage. > Everything has been fine until I pluged off cable from the storage NIC > interface with IP configured in the RHV iSCSI section. > > Now VDSMD got problem because it tries to connect via iscsiadm with exact > IP and does not use the configuration from the /var/lib/iscsi/, where are > tree extra paths to achive the LUN. In multipath -ll I see an active path, > of course with the second storage interface IP > > systemctl status vdsmd: > CGroup: /system.slice/vdsmd.service > ├─4975 /usr/bin/python /usr/share/vdsm/vdsm > ├─5558 /usr/bin/sudo -n /usr/sbin/iscsiadm -m node -T > iqn.1984-05.com.dell:powervault.md3800i.600a098000ae589c000000005893ade2 > -I default -p 192... > └─5559 /usr/sbin/iscsiadm -m node -T > iqn.1984-05.com.dell:powervault.md3800i.600a098000ae589c000000005893ade2 > -I default -p 192.168.130.101 32... > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >