12:19 p.m.
Hi Eli,
Please use any details.
Thanks for your support.
Regards
Renchu Mathew
-----Original Message-----
From: Eli Mesika [mailto:emesika@redhat.com]
Sent: Sunday, January 25, 2015 12:58 PM
To: Renchu Mathew
Cc: Martin Perina; users(a)ovirt.org
Subject: Re: [ovirt-users] Power Management config on Ovirt
Hi Renchu
I am looking currently on he case and will respond later on today after investigating the
logs.
If I will not find anything, can I use the details for the host PM only for status command
to try to debug and find the source of the problem ?
Thanks
Eli
----- Original Message -----
From: "Renchu Mathew" <renchu(a)cracknell.com>
To: "Martin Perina" <mperina(a)redhat.com>
Cc: users(a)ovirt.org, "Eli Mesika" <emesika(a)redhat.com>
Sent: Sunday, January 25, 2015 6:50:00 AM
Subject: RE: [ovirt-users] Power Management config on Ovirt
Hi Martin,
I got the below output when I run the command and it works from both
the nodes.
fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P
Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I
lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power
status'...
Chassis power = On
Done
Thanks
Renchu Mathew | Sr. IT Administrator
CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T
+971 4
3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI |
LONDON | MUSCAT | DOHA | JEDDAH EMAIL renchu(a)cracknell.com | WEB
www.cracknell.com
This email, its content and any files transmitted with it are intended
solely for the addressee(s) and may be legally privileged and/or
confidential. If you are not the intended recipient please let us know
by email reply and delete it from the system. Please note that any
views or opinions presented in this email do not necessarily represent
those of the company. Email transmissions cannot be guaranteed to be
secure or error-free as information could be intercepted, corrupted,
lost, destroyed, arrive late or incomplete, or contain viruses. The
company therefore does not accept liability for any errors or
omissions in the contents of this message which arise as a result of email
transmission.
-----Original Message-----
From: Martin Perina [mailto:mperina@redhat.com]
Sent: Thursday, January 22, 2015 6:12 PM
To: Renchu Mathew
Cc: users(a)ovirt.org; Eli Mesika
Subject: Re: [ovirt-users] Power Management config on Ovirt
----- Original Message -----
> From: "Renchu Mathew" <renchu(a)cracknell.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: users(a)ovirt.org
> Sent: Thursday, January 22, 2015 2:39:43 PM
> Subject: RE: [ovirt-users] Power Management config on Ovirt
>
> Hi Martin,
>
>
>
> Yes. The vdsm host.log is from node-02.
That's strange, I cannot find any call to fenceNode which should
appear, if PM status is gathered.
Eli, any idea?
> I have checked the link and it says
> we need to install the sever view management agent & net-snmp on the hosts.
> Do we need to try this? How to install this on node? I used the
> below irmc admin user.
Not, AFAIK this is needed only from Clustersuite, but not for oVirt.
But could you please execute this command on node-20 just to confirm
that Fujitsu Primergy is communicating through IPMI:
fence_ipmilan -a IP -l USER -p PASS -o status -v -P
where IP is IPMI address (from the log it should be 192.168.1.114)
USER and PASS please set according to you setup.
Thanks
Martin
>
>
>
> [cid:image001.png@01D03669.DD48B4E0]
>
>
>
> Regards
>
>
>
> Renchu Mathew | Sr. IT Administrator
>
>
>
>
>
>
>
> CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4
> 3445417 | F +971 4 3493675 | M +971 50 7386484
>
> ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH
>
> EMAIL renchu(a)cracknell.com | WEB www.cracknell.com
>
>
>
> This email, its content and any files transmitted with it are
> intended solely for the addressee(s) and may be legally privileged
> and/or confidential. If you are not the intended recipient please
> let us know by email reply and delete it from the system. Please
> note that any views or opinions presented in this email do not
> necessarily represent those of the company. Email transmissions
> cannot be guaranteed to be secure or error-free as information could
> be intercepted, corrupted, lost, destroyed, arrive late or
> incomplete, or contain viruses. The company therefore does not
> accept liability for any errors or omissions in the contents of this
> message which arise as a result of email transmission.
>
>
>
>
>
> -----Original Message-----
> From: Martin Perina [mailto:mperina@redhat.com]
> Sent: Thursday, January 22, 2015 4:49 PM
> To: Renchu Mathew
> Cc: users(a)ovirt.org
> Subject: Re: [ovirt-users] Power Management config on Ovirt
>
>
>
> Hi,
>
>
>
> according to [1] Fujitsu iRMC should be accessible using IPMI.
>
> Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log.
> According to engine.log, host Node-02.cracknell.com was used as
> fence proxy.
> Are you sure that vdsm.log is from this host?
>
>
>
> Thanks
>
>
>
> Martin
>
>
>
> [1]
> https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.
> ht
> ml
>
>
>
>
>
> ----- Original Message -----
>
> > From: "Renchu Mathew" <renchu(a)cracknell.com>
>
> > To: "Martin Perina" <mperina(a)redhat.com>
>
> > Cc: users(a)ovirt.org
>
> > Sent: Thursday, January 22, 2015 12:37:51 PM
>
> > Subject: RE: [ovirt-users] Power Management config on Ovirt
>
> >
>
> > Hi Martin,
>
> >
>
> > Please find attached log files from engine and proxy host. Not
> > sure
>
> > whether IPMI or which one can be used. It is Fujitsu iRMC port. I
> > also
>
> > tried the rsb but same error.
>
> >
>
> > Can we configure Power management using Fujitsu iRMC?
>
> >
>
> > Thanks & Regards
>
> >
>
> > Renchu Mathew
>
> >
>
> > -----Original Message-----
>
> > From: Martin Perina [mailto:mperina@redhat.com]
>
> > Sent: Thursday, January 22, 2015 1:58 PM
>
> > To: Renchu Mathew
>
> > Cc: users(a)ovirt.org
>
> > Subject: Re: [ovirt-users] Power Management config on Ovirt
>
> >
>
> > Hi,
>
> >
>
> > first of all are you sure that Fujitsu PRIMERGY is accessible
> > using
>
> > IPMI protocol? If so, could you provide engine.log and also
> > vdsm.log
>
> > from host that was used as fencing proxy? You can find out which
> > host
>
> > is used as a proxy either in Events tab after you execute the test
> > or in engine.log.
>
> >
>
> > Thanks
>
> >
>
> > Martin Perina
>
> >
>
> > ----- Original Message -----
>
> > > From: "Renchu Mathew" <renchu(a)cracknell.com>
>
> > > To: users(a)ovirt.org
>
> > > Sent: Thursday, January 22, 2015 7:41:43 AM
>
> > > Subject: [ovirt-users] Power Management config on Ovirt
>
> > >
>
> > >
>
> > >
>
> > > Dear all,
>
> > >
>
> > >
>
> > >
>
> > > I am trying to configure power management on ovirt v3.5
>
> > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two
> > > Fujitsu
>
> > > PRIMERGY
>
> > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power
>
> > > management configuration. The test gives a message “Test failed,
>
> > > argument of type ‘NoneType’ is not iterable” as below . Also
> > > tried
>
> > > rsb type as per redhat document.
>
> > >
>
> > >
>
> > >
>
> > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do
> > > we
>
> > > need to specify anything in Options?
>
> > >
>
> > >
>
> > >
>
> > > Please help me.
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > > Best Regards
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > > Renchu Mathew
>
> > >
>
> > >
>
> > >
>
> > >
>
> > >
>
> > > _______________________________________________
>
> > > Users mailing list
>
> > > Users@ovirt.org<mailto:Users@ovirt.org>
>
> > > http://lists.ovirt.org/mailman/listinfo/users
>
> > >
>
> >
>