8:32 a.m.
Hi,
On Fri, Feb 15, 2019 at 04:24:15PM +0200, Leo David wrote:
Hi Everyone,
Any thoughts on this ?
It seems that audio streaming is affected as well, and
bandwidth is not an issue in this case.
What audio issues do you see?
'm thinking that maybe if I just just disable compression on
spice, things would get a bit better...maybe.
Thank you !
On Wed, Feb 13, 2019 at 8:05 AM Leo David <leoalex(a)gmail.com> wrote:
> Thank you so much Victor !
> Anyone, any ideea how could I disable video compression for
> spice console on particular vms ?
I'm not familiar with oVirt interface but it shouldn't be hard if
you have access to the host.
# virsh edit $vm-name
switch what you have in graphics to:
<graphics type='spice' autoport='yes'>
<image compression='off'/>
<streaming mode='off'/>
</graphics>
> I am trying to implement an "almost" full desktop
experience
> with an oVirt based vdi environment.
> And besides the Windows10 spice issues ( which are the main
> cause of this thread ), it seems that Windows 7 is affected
> too by the multimedia playing perspective. Which makes a
> total blocker on project implementation....
Do you have spice-guest-tools installed?
> Any suggestions/ similar experiences ?
> Thank you very much and have a nice day !
>
> Leo
Cheers,
Victor
>
> On Mon, Feb 11, 2019, 12:01 Victor Toso <victortoso(a)redhat.com wrote:
>
>> Hi,
>>
>> On Mon, Feb 11, 2019 at 11:50:49AM +0200, Leo David wrote:
>> > Hi,
>> > "This enable host-side streaming, are you sure you want it?"
>> > Not sure yet, but i would at least disable compression, video
>> > playing seems to be pretty poor, and crackling ( youtube, etc )
>>
>> For playing video use-cases (youtube) it might be okay but not
>> for playing games as it has some hard coded delay in the
>> streaming code path.
>>
>> The streaming is mjpeg so you don't save much bandwidth either.
>>
>> > "AFAIK, if virsh edit exits without issue, you need to shutdown
>> > the vm and then start it again"
>> > I did that, and when the vm comes back on, my changes are not there
>> > anymore ....
>>
>> Might be something specific to ovirt, not sure :(
>>
>> I hope someone else can help you.
>>
>> > On Mon, Feb 11, 2019 at 10:45 AM Victor Toso <victortoso(a)redhat.com>
>> wrote:
>> >
>> > > Hi,
>> > >
>> > > On Sun, Feb 10, 2019 at 02:08:48PM +0200, Leo David wrote:
>> > > > Hi,
>> > > >
>> > > > I am trying to disable video compression as per this thread:
>> > > > https://lists.ovirt.org/pipermail/users/2017-January/078753.html
>> > > >
>> > > > The thing is that I just can't figure out where to place the
>> following:
>> > > >
>> > > > <graphics type='spice' autoport='yes'>
>> > > > <listen type='address'/>
>> > > > <image compression='off'/>
>> > > > <streaming mode='filter'/>
>> > >
>> > > This enable host-side streaming, are you sure you want it?
>> > >
>> > > > </graphics>
>> > > >
>> > > > If I attempt to edit vm properties by using virsh and add these
>> > > > custom settings, the configuration file gets overwritten once
>> > > > the vm reboots.
>> > >
>> > > AFAIK, if virsh edit exits without issue, you need to shutdown
>> > > the vm and then start it again. Reboot is not enough.
>> > >
>> > > > Any suggestions?
>> > > >
>> > > > Thank you,
>> > > >
>> > > > Leo
>> > > >
>> > > >
>> > > >
>> > > >
>> > > > On Wed, Feb 6, 2019 at 7:17 PM Leo David
<leoalex(a)gmail.com> wrote:
>> > > >
>> > > > > Hello everyone,
>> > > > > Any chance that this issue to be already fixed in the new
4.3
>> version ?
>> > > > > Thank you !
>> > > > >
>> > > > > On Tue, Jan 8, 2019, 12:25 Victor Toso
<victortoso(a)redhat.com
>> wrote:
>> > > > >
>> > > > >> Hi,
>> > > > >>
>> > > > >> On Tue, Jan 08, 2019 at 12:08:31PM +0200, Leo David
wrote:
>> > > > >> > Thank you very mucjh, and sorry for being so lazy
to search
>> > > > >> > for that rpm by myself. Somehow, fedora rpms missed
from my
>> > > > >> > mind. Oh boy, it requires a lot of packages. Do
you think
>> > > > >> > would it be a good idea to temporarily install
fedora repos, do
>> > > > >> > the yum installation to get the dependencoes too
and then
>> > > > >> > disable the repo ? I am thinking to not break the
ovirt node
>> > > > >> > installation.
>> > > > >>
>> > > > >> The easiest path is to get the source from your current
rpm,
>> > > > >> apply the patch mentioned in previous email, build,
install,
>> > > > >> test.
>> > > > >>
>> > > > >> If that does not work you can rollback. If works, you
can rethink
>> > > > >> what is best.
>> > > > >>
>> > > > >> Cheers,
>> > > > >>
>> > > > >> > yum localinstall
spice-server-0.14.1-1.fc30.x86_64.rpm
>> > > > >> > Loaded plugins: enabled_repos_upload,
fastestmirror,
>> > > imgbased-persist,
>> > > > >> > package_upload, product-id, search-disabled-repos,
>> > > subscription-manager,
>> > > > >> > vdsmupgrade
>> > > > >> > This system is not registered with an entitlement
server. You
>> can
>> > > use
>> > > > >> > subscription-manager to register.
>> > > > >> > Examining spice-server-0.14.1-1.fc30.x86_64.rpm:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > Marking spice-server-0.14.1-1.fc30.x86_64.rpm as an
update to
>> > > > >> > spice-server-0.14.0-2.el7_5.3.x86_64
>> > > > >> > Resolving Dependencies
>> > > > >> > --> Running transaction check
>> > > > >> > ---> Package spice-server.x86_64
0:0.14.0-2.el7_5.3 will be
>> updated
>> > > > >> > ---> Package spice-server.x86_64 0:0.14.1-1.fc30
will be an
>> update
>> > > > >> > --> Processing Dependency:
>> libcrypto.so.1.1(OPENSSL_1_1_0)(64bit)
>> > > for
>> > > > >> > package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > Loading mirror speeds from cached hostfile
>> > > > >> > * epel: ftp.nluug.nl
>> > > > >> > * ovirt-4.2-epel: ftp.nluug.nl
>> > > > >> > --> Processing Dependency:
libssl.so.1.1(OPENSSL_1_1_0)(64bit)
>> for
>> > > > >> package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
libcrypto.so.1.1()(64bit) for
>> package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
libgstapp-1.0.so.0()(64bit) for
>> package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
libgstbase-1.0.so.0()(64bit) for
>> package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
libgstreamer-1.0.so.0()(64bit) for
>> > > package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
libgstvideo-1.0.so.0()(64bit) for
>> > > package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
liborc-0.4.so.0()(64bit) for
>> package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Processing Dependency:
libssl.so.1.1()(64bit) for package:
>> > > > >> > spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > --> Finished Dependency Resolution
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires: libgstvideo-1.0.so.0()(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires: libgstbase-1.0.so.0()(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires:
libgstreamer-1.0.so.0()(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires:
libcrypto.so.1.1(OPENSSL_1_1_0)(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires: liborc-0.4.so.0()(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires: libcrypto.so.1.1()(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires:
libssl.so.1.1(OPENSSL_1_1_0)(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires: libgstapp-1.0.so.0()(64bit)
>> > > > >> > Error: Package: spice-server-0.14.1-1.fc30.x86_64
>> > > > >> > (/spice-server-0.14.1-1.fc30.x86_64)
>> > > > >> > Requires: libssl.so.1.1()(64bit)
>> > > > >> > You could try using --skip-broken to work around
the problem
>> > > > >> > You could try running: rpm -Va --nofiles
--nodigest
>> > > > >> > Uploading Enabled Repositories Report
>> > > > >> > Loaded plugins: fastestmirror, product-id,
subscription-manager
>> > > > >> > This system is not registered with an entitlement
server. You
>> can
>> > > use
>> > > > >> > subscription-manager to register.
>> > > > >> > Cannot upload enabled repos report, is this client
registered?
>> > > > >> >
>> > > > >> > Thank you !
>> > > > >> >
>> > > > >> > Leo
>> > > > >> >
>> > > > >> > On Tue, Jan 8, 2019 at 10:19 AM Victor Toso <
>> victortoso(a)redhat.com>
>> > > > >> wrote:
>> > > > >> >
>> > > > >> > > Hi,
>> > > > >> > >
>> > > > >> > > On Mon, Jan 07, 2019 at 07:29:13PM +0200, Leo
David wrote:
>> > > > >> > > > Thank you very much Victor,
>> > > > >> > > > Is there a rpm that I can easily install
on all the nodes,
>> or
>> > > will
>> > > > >> I need
>> > > > >> > > > to build that version from sources ?
>> > > > >> > >
>> > > > >> > > You can fetch the release of 0.14.1 version
at
>> > > > >> > >
https://gitlab.freedesktop.org/spice/spice/tags
>> > > > >> > >
>> > > > >> > > You can fetch an rpm from Fedora here
>> > > > >> > >
>> https://koji.fedoraproject.org/koji/buildinfo?buildID=1138474
>> > > > >> > >
>> > > > >> > > Cheers,
>> > > > >> > >
>> > > > >> > > > On Mon, Jan 7, 2019, 19:14 Victor Toso
<
>> victortoso(a)redhat.com
>> > > > >> wrote:
>> > > > >> > > >
>> > > > >> > > > > Hi,
>> > > > >> > > > >
>> > > > >> > > > > On Mon, Jan 07, 2019 at 07:00:04PM
+0200, Leo David
>> wrote:
>> > > > >> > > > > > Thank you very much !
>> > > > >> > > > > >
>> > > > >> > > > > > I have modified
>> > > > >> > >
/etc/ovirt-engine/osinfo.conf.d/00-defaults.properties
>> > > > >> > > > > file
>> > > > >> > > > > > and added the last line
>> > > > >> > > > > >
>> > > > >> > > > > > # Windows10x64
>> > > > >> > > > > > os.windows_10x64.id.value = 27
>> > > > >> > > > > > os.windows_10x64.name.value =
Windows 10 x64
>> > > > >> > > > > >
os.windows_10x64.derivedFrom.value = windows_8x64
>> > > > >> > > > > >
os.windows_10x64.productKey.value =
>> > > > >> > > > > >
os.windows_10x64.resources.maximum.ram.value = 2097152
>> > > > >> > > > > >
os.windows_10x64.cpu.unsupported.value = conroe,
>> opteron_g1
>> > > > >> > > > > >
os.windows_10x64.sysprepPath.value =
>> > > > >> > > > > >
${ENGINE_USR}/conf/sysprep/sysprep.w10x64
>> > > > >> > > > > >
*os.windows_10x64.devices.display.vramMultiplier.value
>> = 2*
>> > > > >> > > > > >
>> > > > >> > > > > > The vm has the
"Windows10x64" profile configured
>> > > > >> > > > > >
>> > > > >> > > > > > Restarted the ovirt-engine vm,
powered on the Windows
>> 10 vm.
>> > > > >> Not any
>> > > > >> > > > > > difference...The console is
very slow, almost unusable.
>> > > > >> > > > > >
>> > > > >> > > > > > Also, tried to upgrade
spice-server on the node, but it
>> > > seems
>> > > > >> that
>> > > > >> > > there
>> > > > >> > > > > > aeno updates available. At the
moment, it is installed:
>> > > > >> > > > > > spice-server.x86_64
>> > > 0.14.0-2.el7_5.3
>> > > > >> > > > >
>> > > > >> > > > > Just for reference, the patch in
spice-server that should
>> > > help is
>> > > > >> > > > > from the mail thread
>> > > > >> > > > >
>> > > > >> > > > >
>> > > > >> > > > >
>> > > > >> > >
>> > > > >>
>> > >
>> https://lists.freedesktop.org/archives/spice-devel/2018-June/044237.html
>> > > > >> > > > >
>> > > > >> > > > > Merged as
>> > > > >> > > > >
>> > > > >> > > > >
>> > > > >> > > > >
>> > > > >> > >
>> > > > >>
>> > >
>>
https://gitlab.freedesktop.org/spice/spice/commit/ca4984570f425e87e92abe5...
>> > > > >> > > > >
>> > > > >> > > > > Looking at the repo with git tag
--contains
>> > > ca4984570f425e87e92
>> > > > >> > > > > it shows v0.14.1.
>> > > > >> > > > >
>> > > > >> > > > > 0.14.0-2 probably does not contain
that. Either update to
>> > > 0.14.1
>> > > > >> > > > > or backport the patch. It does need
to shutdown and
>> start the
>> > > VM
>> > > > >> > > > > again.
>> > > > >> > > > >
>> > > > >> > > > > > Any thoughts ?
>> > > > >> > > > > >
>> > > > >> > > > > > Thank you !
>> > > > >> > > > >
>> > > > >> > > > > I hope it helps ;)
>> > > > >> > > > >
>> > > > >> > > > > Cheers,
>> > > > >> > > > >
>> > > > >> > >
>> > > > >> >
>> > > > >> >
>> > > > >> > --
>> > > > >> > Best regards, Leo David
>> > > > >>
>> > > > >
>> > > >
>> > > > --
>> > > > Best regards, Leo David
>> > >
>> >
>> >
>> > --
>> > Best regards, Leo David
>>
>
--
Best regards, Leo David