[ovirt-users] Recommendation for iSCSI configuration

Hi, I'm currently running the platform with following version and facing the issue with iSCSI timeout issue during the network switch maintenance. oVirt Version 4.5 oVirt manager : Redhat 9.0 oVirt node : Rocky 9.4 Here's a drawing of the topology: +---------------+ | Storage | +---------------+ 192.168.11.2 | | 192.168.11.1 | | 10GbE Links | | +---------------+ +---------------+ | Nexus 5k #1 | | Nexus 5k #2 | +---------------+ +---------------+ 192.168.11.3 | | 192.168.11.4 | | 10GbE Links | | +---------------+ | oVirt 4.5 | +---------------+ VLANx: 192.168.11.3/28 VLANx: 192.168.11.4/28 I've configured the oVirt nodes without bonding,it works like one NIC assigned with vLANX with IP .3 and another NIC assigned with vLANX with IP .4. I could see actively only NIC is utilizing the iSCSI traffic(without ISCSI Bond). I would like to utilize both NIC traffic Active-Active mode what is the topology to follow? [iSCSI in LACP is not recommended for iscsi traffic which read from blog].Correct me if I'm wrong. When actively used NIC connected switch reboot,the iscsi traffic which over to another nic takes almost 30 seconds.Can I reduce the failover of NIC timing from 30 seconds to 3 seconds something like that? I don't see the lapsed timeout behaviour in CentOS 8 but rocky9 behaviors differently. Any suggestions or recommendation?