Hi Leo,
I have a similar problem with Centos7 and "Modern" ARECA Scsi cards.
I end up manually installing the new drivers for the card each update
(before the reboot).
If there is a driver for your card but not in the current kernel you can
also manually install it. By warned, you have to do the driver update by
hand every kernel update. And do not forget depmod....
Cheers,
Robert O'Kane
Am 07.09.2019 um 23:12 schrieb Leo David:
Hi everyone,
I have this bloody card installed on a node, and it seems that no
driver can be loaded for it, "ip link sh" does not show it.
Any recommendation about installing this network card on oVirt 4.2.8 ?
lspci -v
....
05:00.0 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE
Server Adapter
Flags: fast devsel, IRQ 31
Memory at d9c00000 (64-bit, non-prefetchable) [size=2M]
Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Expansion ROM at d8000000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable- Count=64 Masked-
Capabilities: [80] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75
Kernel modules: netxen_nic
05:00.1 Ethernet controller: NetXen Incorporated NX3031 Multifunction
1/10-Gigabit Server Adapter (rev 42)
Subsystem: Hewlett-Packard Company NC522SFP Dual Port 10GbE
Server Adapter
Flags: fast devsel, IRQ 33
Memory at d9e00000 (64-bit, non-prefetchable) [size=2M]
Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [40] MSI-X: Enable- Count=64 Masked-
Capabilities: [80] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Device Serial Number 59-69-46-61-6e-48-73-75
Kernel modules: netxen_nic
dmesg | grep netxen
[ 2.188078] netxen_nic 0000:05:00.0: 2MB memory map
[ 2.188371] netxen_nic 0000:05:00.0: Timeout reached waiting for rom
done
[ 2.188442] netxen_nic 0000:05:00.0: Error getting board config info.
[ 2.189488] netxen_nic: probe of 0000:05:00.0 failed with error -5
[ 2.190438] netxen_nic 0000:05:00.1: 2MB memory map
[ 2.190741] netxen_nic 0000:05:00.1: Timeout reached waiting for rom
done
[ 2.190808] netxen_nic 0000:05:00.1: Error getting board config info.
[ 2.190964] netxen_nic: probe of 0000:05:00.1 failed with error -5
...
Thank you very much !
Leo
--
Best regards, Leo David
--
Systems Administrator
Kunsthochschule für Medien Köln
Peter-Welter-Platz 2
50676 Köln