10:42 a.m.
Hi Strahil,
The 0-xlator-message still occurs, but not frequent. Yesterdag a couple of times, but the
4th there were no entries at all.
What I did find out, was that the unsynced entries belonged to VM-images which were on
specific hosts.
Yesterday I migrated them all to other hosts and the unsynced entries were gone except for
3. After a 'stat' of those files/directories, they were gone too.
I think I can migrate the remaining hosts now. An option would be to move the bricks of
the not-yet-upgraded hosts to upgraded hosts. I have spare disks. What do you think?
Regards,
Bertjan
On Tue, Feb 04, 2020 at 06:40:21PM +0000, Strahil Nikolov wrote:
> Did you manage to fix the issue with the 0-xlator ? If yes, most probably
> the issue will be OK. Yet 'probably' doesn't meant that they
'will' be OK.
> If it was my lab - I would go ahead only if the 0-xlator issue is
> over.Yet, a lab is a different thing than prod - so it is your sole
> decision.
> Did you test the upgrade prior moving to Prod ?
> About the hooks - I had such issue before and I had to reinstall the
> gluster rpms to solve it.
> Best Regards,
> Strahil Nikolov
> В вторник, 4 февруари 2020 г., 16:35:27 ч. Гринуич+2, Goorkate, B.J.
> <b.j.goorkate(a)umcutrecht.nl> написа:
> Hi Strahil,
>
> Thanks for your time so far!
>
> The packages seem fine on all of the 3 nodes.
> Only /var/lib/glusterd/glusterd.info is modified and on the not yet
> upgraded nodes these files are missing:
>
> missing /var/lib/glusterd/hooks/1/set/post/S30samba-set.sh
> missing /var/lib/glusterd/hooks/1/start/post/S29CTDBsetup.sh
> missing /var/lib/glusterd/hooks/1/start/post/S30samba-start.sh
> missing /var/lib/glusterd/hooks/1/stop/pre/S29CTDB-teardown.sh
> missing /var/lib/glusterd/hooks/1/stop/pre/S30samba-stop.sh
>
> But that doesn't seem relevant...
>
> I stopped a couple of virtual machines with image files with unsynched
> entries. When they were turned off, I couldn't find them anymore in the
> unsyced entries list. When I turned them on again, some re-appeared, some
> didn't.
>
> I really don't know where to look next.
>
> The big question is: will the problems be resolved when I upgrade the two
> remaining nodes, or will it get worse?
>
> Regards,
>
> Bertjan
>
> On Sun, Feb 02, 2020 at 08:06:58PM +0000, Strahil Nikolov wrote:
> > It seems that something went "off".
> > That '0-xlator: dlsym(xlator_api) missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api' is really worrisome.
> > I think that you might have a bad package and based on the info it
> could
> > be glusterfs-libs which should provide /usr/lib64/libgfrpc.so.0 . I'm
> > currently on gluster v7.0 and I can't check it on my installation.
> > Run a for loop to check the rpms:
> > for i in $(rpm -qa | grep gluster) ; do echo "$i :" ; rpm -V
$i';
> > echo;echo; done
> > Most probably you can safely redo (on the upgraded node) the last yum
> > transaction:
> > yum history
> > yum history info <ID> -> verify the gluster packages were
installed
> here
> > yum history redo <ID>
> > If kernel, glibc, systemd were not in this transaction , you can stop
> > gluster and start it again:
> > Node in maintenance in oVirt
> > systemctl stop ovirt-ha-agent ovirt-ha-broker vdsmd supervdsmd
> > systemctl stop sanlock
> > systemctl stop glusterd
> > /usr/share/glusterfs/scripts/stop-all-gluster-processes.sh
> > And then power up again:
> > systemctl start glusterd
> > gluster volume status -> check all connected
> > systemctl start sanlock supervdsmd vdsmd
> > systemctl start ovirt-ha-broker ovirt-ha-agent
> > Check situation.
> > Yet, you need to make gluster stop complaining , before you can take
> care
> > of the heal. Usually 'rsync' is my best friend - but this is when
> gluster
> > is working normally - and your case is far from normal.
> > If redo doesn't work for you -> try the "yum history
rollback" to
> recover
> > to last good state.
> > I think that 'BOOM Boot Manager' is best in such cases.
> > Note: Never take any of my words for granted. I'm not running oVirt
> in
> > production and some of my methods might not be OK for your
> environment.
> > Best Regards,
> > Strahil Nikolov
> > В неделя, 2 февруари 2020 г., 08:56:01 ч. Гринуич+2, Mark Lamers
> > <mark.r.lamers(a)gmail.com> написа:
> >
> > Hi Strahil,
> >
> > Bertjan is not in the office today, so I will reply if okay with you.
> >
> > First I like to describe the status of our network
> >
> > There are three bricks:
> >
> > and 5 nodes:
> >
> > Every host has a management and migrate vlan iface on a different
> bond
> > iface.
> >
> > The last octet of the ipaddress is similar
> >
> > The output from 'gluster volume heal <volname> info' gives a
long
> list of
> > shards from all three nodes, the file is attached as
> > 'gluster_volume_heal_info.txt'. The node without shards in the
list
> is the
> > updated node to gluster6, oVirt 4.3. That is curious i think.
> >
> > Further more I find the following errors ' E ' in the
glusterd.log
> of the
> > upgrated host:
> >
> > [2020-01-26 17:40:46.147730] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-26 22:47:16.655651] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-27 07:07:51.815490] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-27 18:28:14.953974] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-27 18:58:22.629457] E [MSGID: 106118]
> > [glusterd-op-sm.c:4133:glusterd_op_ac_lock] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-27 18:58:22.629595] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-27 18:58:22.756430] E [MSGID: 106117]
> > [glusterd-op-sm.c:4189:glusterd_op_ac_unlock] 0-management: Unable to
> > release lock for vmstore1
> > [2020-01-27 18:58:22.756581] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 05:31:52.427196] E [MSGID: 106118]
> > [glusterd-op-sm.c:4133:glusterd_op_ac_lock] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 05:31:52.427315] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 05:31:52.537799] E [MSGID: 106115]
> > [glusterd-mgmt.c:117:gd_mgmt_v3_collate_errors] 0-management: Locking
> > failed on 10.13.250.14. Please check log file for details.
> > [2020-01-28 05:31:52.537973] E [MSGID: 106150]
> > [glusterd-syncop.c:1931:gd_sync_task_begin] 0-management: Locking
> Peers
> > Failed.
> > [2020-01-28 05:31:52.539620] E [MSGID: 106117]
> > [glusterd-op-sm.c:4189:glusterd_op_ac_unlock] 0-management: Unable to
> > release lock for vmstore1
> > [2020-01-28 05:31:52.539759] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 05:31:52.539937] E [MSGID: 106115]
> > [glusterd-mgmt.c:117:gd_mgmt_v3_collate_errors] 0-management:
> Unlocking
> > failed on 10.13.250.14. Please check log file for details.
> > [2020-01-28 05:31:52.540446] E [MSGID: 106151]
> > [glusterd-syncop.c:1616:gd_unlock_op_phase] 0-management: Failed to
> unlock
> > on some peer(s)
> > [2020-01-28 08:51:45.638694] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 08:52:45.709950] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 08:54:12.455555] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-28 08:54:16.214779] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 08:57:59.496842] E [MSGID: 106118]
> > [glusterd-op-sm.c:4133:glusterd_op_ac_lock] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 08:57:59.496905] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 08:57:59.505119] E [rpcsvc.c:1577:rpcsvc_submit_generic]
> > 0-rpc-service: failed to submit message (XID: 0x2, Program: GlusterD
> svc
> > cli read-only, ProgVers: 2, Proc: 5) to rpc-transport
> (socket.management)
> > [2020-01-28 08:57:59.505135] E [MSGID: 106430]
> > [glusterd-utils.c:558:glusterd_submit_reply] 0-glusterd: Reply
> submission
> > failed
> > [2020-01-28 08:57:59.647456] E [MSGID: 106117]
> > [glusterd-op-sm.c:4189:glusterd_op_ac_unlock] 0-management: Unable to
> > release lock for vmstore1
> > [2020-01-28 08:57:59.647508] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: 1
> > [2020-01-28 08:57:59.654929] E [rpcsvc.c:1577:rpcsvc_submit_generic]
> > 0-rpc-service: failed to submit message (XID: 0x2, Program: GlusterD
> svc
> > cli, ProgVers: 2, Proc: 27) to rpc-transport (socket.management)
> > [2020-01-28 08:57:59.654943] E [MSGID: 106430]
> > [glusterd-utils.c:558:glusterd_submit_reply] 0-glusterd: Reply
> submission
> > failed
> > [2020-01-28 09:07:34.941350] E [MSGID: 106118]
> > [glusterd-op-sm.c:4133:glusterd_op_ac_lock] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 09:07:34.941391] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 09:07:35.042466] E [MSGID: 106117]
> > [glusterd-op-sm.c:4189:glusterd_op_ac_unlock] 0-management: Unable to
> > release lock for vmstore1
> > [2020-01-28 09:07:35.042510] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 09:13:32.329172] E [MSGID: 106244] [glusterd.c:1785:init]
> > 0-management: creation of 1 listeners failed, continuing with
> succeeded
> > transport
> > [2020-01-28 09:13:44.024431] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-28 09:45:46.347499] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 09:46:45.837466] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 09:47:45.976186] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 09:48:24.976568] E [rpc-clnt.c:346:saved_frames_unwind]
> (-->
> > /lib64/libglusterfs.so.0(_gf_log_callingfn+0x13b)[0x7f61c7c07adb]
> (-->
> > /lib64/libgfrpc.so.0(+0xd7e4)[0x7f61c79ae7e4] (-->
> > /lib64/libgfrpc.so.0(+0xd8fe)[0x7f61c79ae8fe] (-->
> >
> /lib64/libgfrpc.so.0(rpc_clnt_connection_cleanup+0x97)[0x7f61c79af987]
> > (--> /lib64/libgfrpc.so.0(+0xf518)[0x7f61c79b0518] )))))
> 0-management:
> > forced unwinding frame type(glusterd mgmt v3) op(--(1)) called at
> > 2020-01-28 09:44:45.743365 (xid=0x52)
> > [2020-01-28 09:48:24.976640] E [MSGID: 106115]
> > [glusterd-mgmt.c:117:gd_mgmt_v3_collate_errors] 0-management: Locking
> > failed on 10.13.250.11. Please check log file for details.
> > [2020-01-28 09:48:24.976743] E [MSGID: 106150]
> > [glusterd-syncop.c:1931:gd_sync_task_begin] 0-management: Locking
> Peers
> > Failed.
> > [2020-01-28 09:48:24.977361] E [rpc-clnt.c:346:saved_frames_unwind]
> (-->
> > /lib64/libglusterfs.so.0(_gf_log_callingfn+0x13b)[0x7f61c7c07adb]
> (-->
> > /lib64/libgfrpc.so.0(+0xd7e4)[0x7f61c79ae7e4] (-->
> > /lib64/libgfrpc.so.0(+0xd8fe)[0x7f61c79ae8fe] (-->
> >
> /lib64/libgfrpc.so.0(rpc_clnt_connection_cleanup+0x97)[0x7f61c79af987]
> > (--> /lib64/libgfrpc.so.0(+0xf518)[0x7f61c79b0518] )))))
> 0-management:
> > forced unwinding frame type(glusterd mgmt) op(--(3)) called at
> 2020-01-28
> > 09:46:03.586874 (xid=0x53)
> > [2020-01-28 09:48:24.977417] E [MSGID: 106152]
> > [glusterd-syncop.c:104:gd_collate_errors] 0-glusterd: Staging failed
> on
> > 10.13.250.11. Please check log file for details.
> > [2020-01-28 09:48:24.977631] E [rpcsvc.c:1577:rpcsvc_submit_generic]
> > 0-rpc-service: failed to submit message (XID: 0x2, Program: GlusterD
> svc
> > cli, ProgVers: 2, Proc: 22) to rpc-transport (socket.management)
> > [2020-01-28 09:48:24.977664] E [MSGID: 106430]
> > [glusterd-utils.c:558:glusterd_submit_reply] 0-glusterd: Reply
> submission
> > failed
> > [2020-01-28 09:48:24.977744] E [MSGID: 106115]
> > [glusterd-mgmt.c:117:gd_mgmt_v3_collate_errors] 0-management:
> Unlocking
> > failed on 10.13.250.13. Please check log file for details.
> > [2020-01-28 09:48:24.977861] E [MSGID: 106115]
> > [glusterd-mgmt.c:117:gd_mgmt_v3_collate_errors] 0-management:
> Unlocking
> > failed on 10.13.250.15. Please check log file for details.
> > [2020-01-28 09:48:25.012037] E [MSGID: 106115]
> > [glusterd-mgmt.c:117:gd_mgmt_v3_collate_errors] 0-management:
> Unlocking
> > failed on 10.13.250.14. Please check log file for details.
> > [2020-01-28 09:48:25.012148] E [MSGID: 106151]
> > [glusterd-syncop.c:1616:gd_unlock_op_phase] 0-management: Failed to
> unlock
> > on some peer(s)
> > [2020-01-28 09:48:25.012315] E [MSGID: 106117]
> > [glusterd-syncop.c:1640:gd_unlock_op_phase] 0-management: Unable to
> > release lock for vmstore1
> > [2020-01-28 09:48:25.012425] E [rpcsvc.c:1577:rpcsvc_submit_generic]
> > 0-rpc-service: failed to submit message (XID: 0x2, Program: GlusterD
> svc
> > cli, ProgVers: 2, Proc: 27) to rpc-transport (socket.management)
> > [2020-01-28 09:48:25.012452] E [MSGID: 106430]
> > [glusterd-utils.c:558:glusterd_submit_reply] 0-glusterd: Reply
> submission
> > failed
> > [2020-01-28 09:50:46.105492] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-28 10:13:16.199982] E [MSGID: 106118]
> > [glusterd-op-sm.c:4133:glusterd_op_ac_lock] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 10:13:16.200078] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 10:13:16.345918] E [MSGID: 106117]
> > [glusterd-op-sm.c:4189:glusterd_op_ac_unlock] 0-management: Unable to
> > release lock for vmstore1
> > [2020-01-28 10:13:16.346012] E [MSGID: 106376]
> > [glusterd-op-sm.c:8150:glusterd_op_sm] 0-management: handler
> returned: -1
> > [2020-01-28 12:42:46.212783] E [MSGID: 106118]
> > [glusterd-syncop.c:1896:gd_sync_task_begin] 0-management: Unable to
> > acquire lock for vmstore1
> > [2020-01-28 13:25:49.857368] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-29 13:26:03.031179] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-30 12:33:18.590063] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-30 13:34:57.027468] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-30 15:08:10.814931] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> > [2020-01-31 09:40:22.725825] E [MSGID: 101097]
> > [xlator.c:218:xlator_volopt_dynload] 0-xlator: dlsym(xlator_api)
> missing:
> > /usr/lib64/glusterfs/6.6/rpc-transport/socket.so: undefined symbol:
> > xlator_api
> >
> > I 'm curious for your opinion of the data sofar.
> >
> > Love to here from you (or ather members of the list)
> >
> > Regards Mark Lamers
> >
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org
> > To unsubscribe send an email to users-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> > oVirt Code of Conduct:
> > https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
> >
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/VUBWMDUN3GM...
>
> > _______________________________________________
> > Users mailing list -- users(a)ovirt.org
> > To unsubscribe send an email to users-leave(a)ovirt.org
> > Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> > oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> > List Archives:
>
https://lists.ovirt.org/archives/list/users@ovirt.org/message/PF2ONI7EHIX...
>
> ------------------------------------------------------------------------------
>
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is
> uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht
> ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender
> direct
> te informeren door het bericht te retourneren. Het Universitair Medisch
> Centrum Utrecht is een publiekrechtelijke rechtspersoon in de zin van de
> W.H.W.
> (Wet Hoger Onderwijs en Wetenschappelijk Onderzoek) en staat geregistreerd
> bij
> de Kamer van Koophandel voor Midden-Nederland onder nr. 30244197.
>
> Denk s.v.p aan het milieu voor u deze e-mail afdrukt.
>
> ------------------------------------------------------------------------------
>
> This message may contain confidential information and is intended
> exclusively
> for the addressee. If you receive this message unintentionally, please do
> not
> use the contents but notify the sender immediately by return e-mail.
> University
> Medical Center Utrecht is a legal person by public law and is registered
> at
> the Chamber of Commerce for Midden-Nederland under no. 30244197.
>
> Please consider the environment before printing this e-mail.