Re: [Users] Problem install

Hi. Have you tried solving the hostnames resolving issues that are described on your email? Add the hosts to /etc/hosts Alex No dia 06/03/2013 18:02, "Marcelo Barbosa" <mr.marcelo.barbosa(a)gmail.com&gt; escreveu: > Attached my log file. > > Marcelo Barbosa > *mr.marcelo.barbosa(a)gmail.com* > > > On Wed, Mar 6, 2013 at 2:48 PM, Marcelo Barbosa < > mr.marcelo.barbosa(a)gmail.com&gt; wrote: > >> hi guys, >> >> I'am tryed install Ovirt 3.2 all-in-one in my Fedora 18, but this >> version not finish for sucessful install, information my enviroment: >> >> [root@firelap ovirt]# cat /etc/redhat-release >> Fedora release 18 (Spherical Cow) >> >> [root@firelap ovirt]# uname -a >> Linux firelap 3.7.9-205.fc18.x86_64 #1 SMP Sun Feb 24 20:10:02 UTC 2013 >> x86_64 x86_64 x86_64 GNU/Linux >> >> [root@firelap ovirt]# ifconfig >> bond0: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 >> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >> RX packets 0 bytes 0 (0.0 B) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 0 bytes 0 (0.0 B) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> bond1: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 >> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >> RX packets 0 bytes 0 (0.0 B) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 0 bytes 0 (0.0 B) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> bond2: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 >> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >> RX packets 0 bytes 0 (0.0 B) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 0 bytes 0 (0.0 B) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> bond3: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 >> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >> RX packets 0 bytes 0 (0.0 B) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 0 bytes 0 (0.0 B) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> bond4: flags=5123<UP,BROADCAST,MASTER,MULTICAST> mtu 1500 >> ether 00:00:00:00:00:00 txqueuelen 0 (Ethernet) >> RX packets 0 bytes 0 (0.0 B) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 0 bytes 0 (0.0 B) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 >> inet 127.0.0.1 netmask 255.0.0.0 >> inet6 ::1 prefixlen 128 scopeid 0x10<host> >> loop txqueuelen 0 (Local Loopback) >> RX packets 136972 bytes 54834621 (52.2 MiB) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 136972 bytes 54834621 (52.2 MiB) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> >> p5p1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 >> inet 172.16.255.43 netmask 255.255.255.192 broadcast >> 172.16.255.63 >> inet6 fe80::7a45:c4ff:feb0:8995 prefixlen 64 scopeid 0x20<link> >> ether 78:45:c4:b0:89:95 txqueuelen 1000 (Ethernet) >> RX packets 480681 bytes 614801393 (586.3 MiB) >> RX errors 0 dropped 0 overruns 0 frame 0 >> TX packets 323373 bytes 35479386 (33.8 MiB) >> TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 >> device interrupt 17 >> >> [root@firelap ovirt]# rpm -qa | grep ovirt >> ovirt-engine-cli-3.2.0.10-1.fc18.noarch >> ovirt-engine-backend-3.2.0-4.fc18.noarch >> ovirt-engine-config-3.2.0-4.fc18.noarch >> ovirt-host-deploy-1.0.0-1.fc18.noarch >> ovirt-engine-setup-plugin-allinone-3.2.0-4.fc18.noarch >> ovirt-engine-restapi-3.2.0-4.fc18.noarch >> ovirt-engine-dbscripts-3.2.0-4.fc18.noarch >> ovirt-image-uploader-3.2.0-1.fc18.noarch >> ovirt-host-deploy-offline-1.0.0-1.fc18.noarch >> ovirt-engine-setup-3.2.0-4.fc18.noarch >> ovirt-release-fedora-5-3.noarch >> ovirt-engine-tools-common-3.2.0-4.fc18.noarch >> ovirt-engine-3.2.0-4.fc18.noarch >> ovirt-log-collector-3.2.0-1.fc18.noarch >> ovirt-host-deploy-java-1.0.0-1.fc18.noarch >> ovirt-engine-userportal-3.2.0-4.fc18.noarch >> ovirt-engine-notification-service-3.2.0-4.fc18.noarch >> ovirt-iso-uploader-3.2.0-1.fc18.noarch >> ovirt-engine-webadmin-portal-3.2.0-4.fc18.noarch >> ovirt-engine-sdk-3.2.0.9-1.fc18.noarch >> ovirt-engine-genericapi-3.2.0-4.fc18.noarch >> >> [root@firelap ~]# host firelap.usc.unirede.net >> firelap.usc.unirede.net has address 172.16.255.43 >> >> [root@firelap ~]# ping firelap.usc.unirede.net >> PING firelap.usc.unirede.net (172.16.255.43) 56(84) bytes of data. >> 64 bytes from firelap (172.16.255.43): icmp_seq=1 ttl=64 time=0.055 ms >> >> [root@firelap ~]# engine-setup >> Welcome to oVirt Engine setup utility >> oVirt Engine uses httpd to proxy requests to the application server. >> It looks like the httpd installed locally is being actively used. >> The installer can override current configuration . >> Alternatively you can use JBoss directly (on ports higher than 1024) >> Do you wish to override current httpd configuration and restart the >> service? ['yes'| 'no'] [yes] : >> HTTP Port [80] : >> HTTPS Port [443] : >> Host fully qualified domain name. Note: this name should be fully >> resolvable [firelap.no-ip.org] : localhost.localdomain >> The IP (127.0.0.1) which was resolved from the FQDN >> localhost.localdomain is not configured on any interface on this host >> User input failed validation, do you still wish to use it? (yes|no): no >> Host fully qualified domain name. Note: this name should be fully >> resolvable [firelap.no-ip.org] : >> firelap.no-ip.org did not resolve into an IP address >> User input failed validation, do you still wish to use it? (yes|no): no >> Host fully qualified domain name. Note: this name should be fully >> resolvable [firelap.no-ip.org] : firelap.usc.unirede.net >> Enter a password for an internal oVirt Engine administrator user >> (admin@internal) : >> Warning: Weak Password. >> Confirm password : >> Organization Name for the Certificate [no-ip.org] : >> firelap.usc.unirede.net >> The engine can be configured to present the UI in three different >> application modes. virt [Manage virtualization only], gluster [Manage >> gluster storage only], and both [Manage virtualization as well as gluster >> storage] ['virt'| 'gluster'| 'both'] [both] : >> The default storage type you will be using ['NFS'| 'FC'| 'ISCSI'| >> 'POSIXFS'] [NFS] : >> Enter DB type for installation ['remote'| 'local'] [local] : >> Enter a password for a local oVirt Engine DB admin user (engine) : >> Warning: Weak Password. >> Confirm password : >> Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso >> Error: directory /firebackup/ovirt/iso is not empty >> Local ISO domain path [/var/lib/exports/iso] : /firebackup/ovirt/iso >> Firewall ports need to be opened. >> The installer can configure firewall automatically overriding the >> current configuration. The old configuration will be backed up. >> Alternately you can configure the firewall later using an example file. >> Which firewall do you wish to configure? ['None'| 'Firewalld'| >> 'IPTables']: IPTables >> Configure VDSM on this host? ['yes'| 'no'] [yes] : >> Local storage domain path [/var/lib/images] : /firebackup/ovirt/vms >> Confirm root password : >> >> oVirt Engine will be installed using the following configuration: >> ================================================================= >> override-httpd-config: yes >> http-port: 80 >> https-port: 443 >> host-fqdn: firelap.usc.unirede.net >> auth-pass: ******** >> org-name: firelap.usc.unirede.net >> application-mode: both >> default-dc-type: NFS >> db-remote-install: local >> db-local-pass: ******** >> nfs-mp: /firebackup/ovirt/iso >> override-firewall: IPTables >> config-allinone: yes >> storage-path: /firebackup/ovirt/vms >> superuser-pass: ******** >> Proceed with the configuration listed above? (yes|no): yes >> >> Installing: >> AIO: Validating CPU Compatibility... [ DONE >> ] >> AIO: Adding firewall rules... [ DONE >> ] >> Configuring oVirt Engine... [ DONE >> ] >> Configuring JVM... [ DONE >> ] >> Creating CA... [ DONE >> ] >> Updating ovirt-engine service... [ DONE >> ] >> Setting Database Configuration... [ DONE >> ] >> Setting Database Security... [ DONE >> ] >> Creating Database... [ DONE >> ] >> Updating the Default Data Center Storage Type... [ DONE >> ] >> Editing oVirt Engine Configuration... [ DONE >> ] >> Editing Postgresql Configuration... [ DONE >> ] >> Configuring the Default ISO Domain... [ DONE >> ] >> Configuring Firewall... [ DONE >> ] >> Starting ovirt-engine Service... [ DONE >> ] >> Configuring HTTPD... [ DONE >> ] >> AIO: Creating storage directory... [ DONE >> ] >> AIO: Adding Local Datacenter and cluster... [ DONE >> ] >> AIO: Adding Local host (This may take several minutes)... [ ERROR ] >> Error: Host was found in a 'Failed' state. Please check engine and >> bootstrap installation logs. >> Please check log file >> /var/log/ovirt-engine/engine-setup_2013_03_06_14_30_51.log for more >> information >> >> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0 >> 2013-03-06 14:35:34::DEBUG::common_utils::1238::root:: stopping httpd >> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action >> httpd on service stop >> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command >> --> '/sbin/service httpd stop' >> 2013-03-06 14:35:34::DEBUG::common_utils::472::root:: output = >> 2013-03-06 14:35:34::DEBUG::common_utils::473::root:: stderr = >> Redirecting to /bin/systemctl stop httpd.service >> >> 2013-03-06 14:35:34::DEBUG::common_utils::474::root:: retcode = 0 >> 2013-03-06 14:35:34::DEBUG::common_utils::1228::root:: starting httpd >> 2013-03-06 14:35:34::DEBUG::common_utils::1275::root:: executing action >> httpd on service start >> 2013-03-06 14:35:34::DEBUG::common_utils::434::root:: Executing command >> --> '/sbin/service httpd start' >> 2013-03-06 14:35:36::DEBUG::common_utils::472::root:: output = >> 2013-03-06 14:35:36::DEBUG::common_utils::473::root:: stderr = >> Redirecting to /bin/systemctl start httpd.service >> >> 2013-03-06 14:35:36::DEBUG::common_utils::474::root:: retcode = 0 >> 2013-03-06 14:35:36::DEBUG::setup_sequences::59::root:: running >> makeStorageDir >> 2013-03-06 14:35:36::DEBUG::all_in_one_100::368::root:: >> Creating/Verifying local domain path >> 2013-03-06 14:35:36::DEBUG::all_in_one_100::374::root:: Setting selinux >> context >> 2013-03-06 14:35:36::DEBUG::nfsutils::36::root:: setting selinux context >> for /firebackup/ovirt/vms >> 2013-03-06 14:35:36::DEBUG::common_utils::434::root:: Executing command >> --> '/usr/sbin/semanage fcontext -a -t public_content_rw_t >> /firebackup/ovirt/vms(/.*)?' >> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output = >> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr = >> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0 >> 2013-03-06 14:35:39::DEBUG::common_utils::434::root:: Executing command >> --> '/sbin/restorecon -r /firebackup/ovirt/vms' >> 2013-03-06 14:35:39::DEBUG::common_utils::472::root:: output = >> 2013-03-06 14:35:39::DEBUG::common_utils::473::root:: stderr = >> 2013-03-06 14:35:39::DEBUG::common_utils::474::root:: retcode = 0 >> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running >> waitForJbossUp >> 2013-03-06 14:35:39::DEBUG::all_in_one_100::445::root:: Checking JBoss >> status. >> 2013-03-06 14:35:39::INFO::all_in_one_100::448::root:: JBoss is up and >> running. >> 2013-03-06 14:35:39::DEBUG::setup_sequences::59::root:: running initAPI >> 2013-03-06 14:35:39::DEBUG::all_in_one_100::240::root:: Initiating the >> API object >> 2013-03-06 14:35:41::DEBUG::setup_sequences::59::root:: running createDC >> 2013-03-06 14:35:41::DEBUG::all_in_one_100::256::root:: Creating the >> local datacenter >> 2013-03-06 14:35:42::DEBUG::setup_sequences::59::root:: running >> createCluster >> 2013-03-06 14:35:42::DEBUG::all_in_one_100::267::root:: Creating the >> local cluster >> 2013-03-06 14:35:43::DEBUG::setup_sequences::59::root:: running >> createHost >> 2013-03-06 14:35:43::DEBUG::all_in_one_100::280::root:: Adding the local >> host >> 2013-03-06 14:35:44::DEBUG::setup_sequences::59::root:: running >> waitForHostUp >> 2013-03-06 14:35:44::DEBUG::all_in_one_100::297::root:: Waiting for host >> to become operational >> 2013-03-06 14:35:45::DEBUG::all_in_one_100::300::root:: current host >> status is: installing >> 2013-03-06 14:35:45::DEBUG::all_in_one_100::311::root:: Traceback (most >> recent call last): >> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line >> 308, in isHostUp >> raise Exception(INFO_CREATE_HOST_WAITING_UP) >> Exception: Waiting for the host to start >> >> 2013-03-06 14:35:50::DEBUG::all_in_one_100::297::root:: Waiting for host >> to become operational >> 2013-03-06 14:35:50::DEBUG::all_in_one_100::300::root:: current host >> status is: installing >> 2013-03-06 14:35:50::DEBUG::all_in_one_100::311::root:: Traceback (most >> recent call last): >> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line >> 308, in isHostUp >> raise Exception(INFO_CREATE_HOST_WAITING_UP) >> Exception: Waiting for the host to start >> >> 2013-03-06 14:35:55::DEBUG::all_in_one_100::297::root:: Waiting for host >> to become operational >> 2013-03-06 14:35:56::DEBUG::all_in_one_100::300::root:: current host >> status is: install_failed >> 2013-03-06 14:35:56::DEBUG::all_in_one_100::311::root:: Traceback (most >> recent call last): >> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line >> 306, in isHostUp >> raise utils.RetryFailException(ERROR_CREATE_HOST_FAILED) >> RetryFailException: Error: Host was found in a 'Failed' state. Please >> check engine and bootstrap installation logs. >> >> 2013-03-06 14:35:56::DEBUG::setup_sequences::62::root:: Traceback (most >> recent call last): >> File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in >> run >> function() >> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line >> 294, in waitForHostUp >> utils.retry(isHostUp, tries=120, timeout=600, sleep=5) >> File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in >> retry >> raise e >> RetryFailException: Error: Host was found in a 'Failed' state. Please >> check engine and bootstrap installation logs. >> >> 2013-03-06 14:35:56::DEBUG::engine-setup::1948::root:: *** The following >> params were used as user input: >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: >> override-httpd-config: yes >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: http-port: 80 >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: https-port: 443 >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: random-passwords: >> no >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: mac-range: >> 00:1A:4A:10:FF:00-00:1A:4A:10:FF:FF >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: host-fqdn: >> firelap.usc.unirede.net >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: auth-pass: >> ******** >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: org-name: >> firelap.usc.unirede.net >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: application-mode: >> both >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: default-dc-type: >> NFS >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: >> db-remote-install: local >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-host: localhost >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: db-local-pass: >> ******** >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: nfs-mp: >> /firebackup/********/iso >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: iso-domain-name: >> ISO_DOMAIN >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-nfs: yes >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: >> override-firewall: IPTables >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: config-allinone: >> yes >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: storage-path: >> /firebackup/********/vms >> 2013-03-06 14:35:56::DEBUG::engine-setup::1953::root:: superuser-pass: >> ******** >> 2013-03-06 14:35:56::ERROR::engine-setup::2369::root:: Traceback (most >> recent call last): >> File "/bin/engine-setup", line 2363, in <module> >> main(confFile) >> File "/bin/engine-setup", line 2146, in main >> runSequences() >> File "/bin/engine-setup", line 2068, in runSequences >> controller.runAllSequences() >> File "/usr/share/ovirt-engine/scripts/setup_controller.py", line 54, >> in runAllSequences >> sequence.run() >> File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 154, >> in run >> step.run() >> File "/usr/share/ovirt-engine/scripts/setup_sequences.py", line 60, in >> run >> function() >> File "/usr/share/ovirt-engine/scripts/plugins/all_in_one_100.py", line >> 294, in waitForHostUp >> utils.retry(isHostUp, tries=120, timeout=600, sleep=5) >> File "/usr/share/ovirt-engine/scripts/common_utils.py", line 1009, in >> retry >> raise e >> RetryFailException: Error: Host was found in a 'Failed' state. Please >> check engine and bootstrap installation logs. >> >> Thnkz for attention. >> >> Marcelo Barbosa >> *mr.marcelo.barbosa(a)gmail.com* >> > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >