1:59 p.m.
This is a multi-part message in MIME format.
--------------E7D352D155AD6C0A5C0DC171
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Ah, spoke to soon. 30 seconds later the network went down with IPv6
disabled. So it does appear to be a host forwarding problem, not a VM
problem. I have an oVirt 4.0 cluster on the same network that doesn't
have these issues, so it must be a configuration issue somewhere. Here
is a dump of my ip config on the host:
[07:57:26]root@ovirt730-01 ~ # ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmNet
state UP qlen 1000
link/ether 18:66:da:eb:8f:c0 brd ff:ff:ff:ff:ff:ff
3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 18:66:da:eb:8f:c1 brd ff:ff:ff:ff:ff:ff
4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 18:66:da:eb:8f:c2 brd ff:ff:ff:ff:ff:ff
5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 18:66:da:eb:8f:c3 brd ff:ff:ff:ff:ff:ff
6: p5p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
ovirtmgmt state UP qlen 1000
link/ether f4:e9:d4:a9:7a:f0 brd ff:ff:ff:ff:ff:ff
7: p5p2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether f4:e9:d4:a9:7a:f2 brd ff:ff:ff:ff:ff:ff
8: vmNet: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state
UP qlen 1000
link/ether 18:66:da:eb:8f:c0 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.180/24 brd 192.168.1.255 scope global vmNet
valid_lft forever preferred_lft forever
10: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether f4:e9:d4:a9:7a:f0 brd ff:ff:ff:ff:ff:ff
inet 192.168.130.180/24 brd 192.168.130.255 scope global ovirtmgmt
valid_lft forever preferred_lft forever
11: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000
link/ether fa:f3:48:35:76:8d brd ff:ff:ff:ff:ff:ff
14: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:16:3e:3f:fb:ec brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc16:3eff:fe3f:fbec/64 scope link
valid_lft forever preferred_lft forever
15: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master vmNet state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:51 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:151/64 scope link
valid_lft forever preferred_lft forever
16: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master vmNet state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:52 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:152/64 scope link
valid_lft forever preferred_lft forever
[07:57:50]root@ovirt730-01 ~ # ip route show
default via 192.168.1.254 dev vmNet
192.168.1.0/24 dev vmNet proto kernel scope link src 192.168.1.180
169.254.0.0/16 dev vmNet scope link metric 1008
169.254.0.0/16 dev ovirtmgmt scope link metric 1010
192.168.130.0/24 dev ovirtmgmt proto kernel scope link src
192.168.130.180
[07:57:53]root@ovirt730-01 ~ # ip rule show
0: from all lookup local
32760: from all to 192.168.130.0/24 iif ovirtmgmt lookup 3232268980
32761: from 192.168.130.0/24 lookup 3232268980
32762: from all to 192.168.1.0/24 iif vmNet lookup 2308294836
32763: from 192.168.1.0/24 lookup 2308294836
32766: from all lookup main
32767: from all lookup default
[07:57:58]root@ovirt730-01 ~ #
On 2017-04-10 07:54 AM, Charles Tassell wrote:
Hi Everyone,
Just an update, I installed a new Ubuntu guest VM and it was doing
the same thing regarding the network going down, then I disabled IPv6
and it's been fine for the past 10-15 minutes. So the issue seems to
be IPv6 related, and I don't need IPv6 so I can just turn it off. The
eth1 NIC disappearing is still worrisome though.
On 2017-04-10 07:13 AM, Charles Tassell wrote:
> Hi Everyone,
>
> Thanks for the help, answers below.
>
> On 2017-04-10 05:27 AM, Sandro Bonazzola wrote:
>> Adding Simone and Martin, replying inline.
>>
>> On Mon, Apr 10, 2017 at 10:16 AM, Ondrej Svoboda
>> <osvoboda(a)redhat.com <mailto:osvoboda@redhat.com>> wrote:
>>
>> Hello Charles,
>>
>> First, can you give us more information regarding the duplicated
>> IPv6 addresses? Since you are going to reinstall the hosted
>> engine, could you make sure that NetworkManager is disabled
>> before adding the second vNIC (and perhaps even disable IPv6 and
>> reboot as well, so we have a solid base and see what makes the
>> difference)?
>>
> I disabled NetworkManager on the hosts (systemctl disable
> NetworkManager ; service NetworkManager stop) before doing the oVirt
> setup and rebooted to make sure that it didn't come back up. Or are
> you referring to on the hosted engine VM? I just removed and
> re-added the eth1 NIC in the hosted engine, and this is what showed
> up in dmesg:
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: [1af4:1000] type 00
> class 0x020000
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x10: [io 0x0000-0x001f]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x14: [mem
> 0x00000000-0x00000fff]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x20: [mem
> 0x00000000-0x00003fff 64bit pref]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x30: [mem
> 0x00000000-0x0003ffff pref]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 6: assigned [mem
> 0xc0000000-0xc003ffff pref]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 4: assigned [mem
> 0xc0040000-0xc0043fff 64bit pref]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 1: assigned [mem
> 0xc0044000-0xc0044fff]
> [Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 0: assigned [io
> 0x1000-0x101f]
> [Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: enabling device
> (0000 -> 0003)
> [Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: irq 35 for MSI/MSI-X
> [Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: irq 36 for MSI/MSI-X
> [Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: irq 37 for MSI/MSI-X
> [Mon Apr 10 06:46:43 2017] IPv6: ADDRCONF(NETDEV_UP): eth1: link is
> not ready
> [Mon Apr 10 06:46:43 2017] IPv6: eth1: IPv6 duplicate address
> fe80::21a:4aff:fe16:151 detected!
>
> Then when the network dropped I started getting these:
>
> [Mon Apr 10 06:48:00 2017] IPv6: eth1: IPv6 duplicate address
> 2001:410:e000:902:21a:4aff:fe16:151 detected!
> [Mon Apr 10 06:48:00 2017] IPv6: eth1: IPv6 duplicate address
> 2001:410:e000:902:21a:4aff:fe16:151 detected!
> [Mon Apr 10 06:49:51 2017] IPv6: eth1: IPv6 duplicate address
> 2001:410:e000:902:21a:4aff:fe16:151 detected!
> [Mon Apr 10 06:51:40 2017] IPv6: eth1: IPv6 duplicate address
> 2001:410:e000:902:21a:4aff:fe16:151 detected!
>
> The network on eth1 would go down for a few seconds then come back
> up, but networking stays solid on eth0. I disabled NetworkManager on
> the HE VM as well to see if that makes a difference. I also disabled
> IPv6 with sysctl to see if that helps. I'll install a Ubuntu VM on
> the cluster later today and see if it has a similar issue.
>
>
>>
>> What kind of documentation did you follow to install the hosted
>> engine? Was it this page?
>> https://www.ovirt.org/documentation/how-to/hosted-engine/
>> <https://www.ovirt.org/documentation/how-to/hosted-engine/> If
>> so, could you file a bug against VDSM networking and attach
>> /var/log/vdsm/vdsm.log and supervdsm.log, and make sure they
>> include the time period from adding the second vNIC to rebooting?
>>
>> Second, even the vNIC going missing after reboot looks like a
>> bug to me. Even though eth1 does not exist in the VM, can you
>> see it defined for the VM in the engine web GUI?
>>
>>
>> If the HE vm configuration wasn't flushed to the OVF_STORE yet, it
>> make sense it disappeared on restart.
>>
> The docs I used were
>
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/...
> which someone on the list pointed me to last week as being more
> up-to-date than what was on the website (the docs on the website
> don't seem to mention that you need to put the HE on it's own
> datastore and look to be more geared towards bare-metal engine rather
> than the VM self hosted option.)
>
> When I went back into the GUI and looked at the hosted engine config
> the second NIC was listed there, but it wasn't showing up in lspci on
> the VM. I removed the NIC in the GUI and re-added it, and the device
> appeared again on the VM. What is the proper way to "save" the state
> of the VM so that the OVF_STORE gets updated? When I do anything on
> the HE VM that I want to test I just type "reboot", but that powers
> down the VM. I then login to my host and run "hosted-engine
> --vm-start" which restarts it, but of course the last time I did that
> it restarted without the second NIC.
>
>>
>> The steps you took to install the hosted engine with regards to
>> networking look good to me, but I believe Sandro (CC'ed) would
>> be able to give more advice.
>>
>> Sandro, since we want to configure bonding, would you recommend
>> to install the engine physically first, move it to a VM,
>> according to the following method, and only then reconfigure
>> networking?
>>
https://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_...
>>
<https://www.ovirt.org/documentation/self-hosted/chap-Migrating_from_Bare_...
>>
>>
>>
>> I don't see why a diret HE deployment couldn't be done. Simone,
>> Martin can you help here?
>>
>>
>>
>> Thank you,
>> Ondra
>>
>> On Mon, Apr 10, 2017 at 8:51 AM, Charles Tassell
>> <ctassell(a)gmail.com <mailto:ctassell@gmail.com>> wrote:
>>
>> Hi Everyone,
>>
>> Okay, I'm again having problems with getting basic
>> networking setup with oVirt 4.1 Here is my situation. I
>> have two servers I want to use to create an oVirt cluster,
>> with two different networks. My "public" network is a 1G
>> link on device em1 connected to my Internet feed, and my
>> "storage" network is a 10G link connected on device p5p1 to
>> my file server. Since I need to connect to my storage
>> network in order to do the install, I selected p5p1 has the
>> ovirtmgmt interface when installing the hosted engine. That
>> worked fine, I got everything installed, so I used some
>> ssh-proxy magic to connect to the web console and completed
>> the install (setup a Storage domain and create a new network
>> vmNet for VM networking and added em1 to it.)
>>
>> The problem was that when I added a second network device
>> to the HostedEngine VM (so that I can connect to it from my
>> public network) it would intermittently go down. I did some
>> digging and found some IPV6 errors in the dmesg (IPv6: eth1:
>> IPv6 duplicate address 2001:410:e000:902:21a:4aff:fe16:151
>> detected!) so I disabled IPv6 on both eth0 and eth1 in the
>> HostedEngine and rebooted it. The problem is that when I
>> restarted the VM, the eth1 device was missing.
>>
>> So, my question is: Can I add a second NIC to the
>> HostedEngine VM and make it stick, or will it be deleted
>> whenever the engine VM is restarted?
>>
>>
>> When you change something in the HE Vm using the web ui, it has to
>> be saved also on the OVF_STORE to make it permanent for further reboot.
>> Martin can you please elaborate here?
>>
>>
>> Is there a better way to do what I'm trying to do, ie,
>> should I setup ovirtmgmt on the public em1 interface, and
>> then create the "storage" network after the fact for
>> connecting to the datastores and such. Is that even
>> possible, or required? I was thinking that it would be
>> better for migrations and other management functions to
>> happen on the faster 10G network, but if the HostedEngine
>> doesn't need to be able to connect to the storage network
>> maybe it's not worth the effort?
>>
>> Eventually I want to setup LACP on the storage network,
>> but I had to wipe the servers and reinstall from scratch the
>> last time I tried to set that up. I was thinking that it
>> was because I setup the bonding before installing oVirt, so
>> I didn't do that this time.
>>
>> Here are my /etc/sysconfig/network-scripts/ifcfg-* files
>> in case I did something wrong there (I'm more familiar with
>> Debian/Ubuntu network setup than CentOS)
>>
>> ifcfg-eth0: (ovirtmgmt aka storage)
>> ----------------
>> BROADCAST=192.168.130.255
>> NETMASK=255.255.255.0
>> BOOTPROTO=static
>> DEVICE=eth0
>> IPADDR=192.168.130.179
>> ONBOOT=yes
>> DOMAIN=public.net <http://public.net>
>> ZONE=public
>> IPV6INIT=no
>>
>>
>> ifcfg-eth1: (vmNet aka Internet)
>> ----------------
>> BROADCAST=192.168.1.255
>> NETMASK=255.255.255.0
>> BOOTPROTO=static
>> DEVICE=eth1
>> IPADDR=192.168.1.179
>> GATEWAY=192.168.1.254
>> ONBOOT=yes
>> DNS1=192.168.1.1
>> DNS2=192.168.1.2
>> DOMAIN=public.net <http://public.net>
>> ZONE=public
>> IPV6INIT=no
>>
>> _______________________________________________
>> Users mailing list
>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>> http://lists.ovirt.org/mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
>>
>>
>> --
>>
>> SANDRO BONAZZOLA
>>
>> ASSOCIATE MANAGER, SOFTWARE ENGINEERING, EMEA ENG VIRTUALIZATION R&D
>>
>> Red Hat EMEA <https://www.redhat.com/>
>>
>> <https://red.ht/sig>
>> TRIED. TESTED. TRUSTED. <https://redhat.com/trusted>
>>
>
--------------E7D352D155AD6C0A5C0DC171
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Ah, spoke to soon. 30 seconds later the network went down with
IPv6 disabled. So it does appear to be a host forwarding problem,
not a VM problem. I have an oVirt 4.0 cluster on the same network
that doesn't have these issues, so it must be a configuration
issue somewhere. Here is a dump of my ip config on the host:</p>
<p>[07:57:26]root@ovirt730-01 ~ # ip addr show<br>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state
UNKNOWN qlen 1<br>
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br>
inet 127.0.0.1/8 scope host lo<br>
valid_lft forever preferred_lft forever<br>
inet6 ::1/128 scope host <br>
valid_lft forever preferred_lft forever<br>
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq
master vmNet state UP qlen 1000<br>
link/ether 18:66:da:eb:8f:c0 brd ff:ff:ff:ff:ff:ff<br>
3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000<br>
link/ether 18:66:da:eb:8f:c1 brd ff:ff:ff:ff:ff:ff<br>
4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000<br>
link/ether 18:66:da:eb:8f:c2 brd ff:ff:ff:ff:ff:ff<br>
5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000<br>
link/ether 18:66:da:eb:8f:c3 brd ff:ff:ff:ff:ff:ff<br>
6: p5p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq
master ovirtmgmt state UP qlen 1000<br>
link/ether f4:e9:d4:a9:7a:f0 brd ff:ff:ff:ff:ff:ff<br>
7: p5p2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state
DOWN qlen 1000<br>
link/ether f4:e9:d4:a9:7a:f2 brd ff:ff:ff:ff:ff:ff<br>
8: vmNet: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP qlen 1000<br>
link/ether 18:66:da:eb:8f:c0 brd ff:ff:ff:ff:ff:ff<br>
inet 192.168.1.180/24 brd 192.168.1.255 scope global vmNet<br>
valid_lft forever preferred_lft forever<br>
10: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UP qlen 1000<br>
link/ether f4:e9:d4:a9:7a:f0 brd ff:ff:ff:ff:ff:ff<br>
inet 192.168.130.180/24 brd 192.168.130.255 scope global
ovirtmgmt<br>
valid_lft forever preferred_lft forever<br>
11: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
state DOWN qlen 1000<br>
link/ether fa:f3:48:35:76:8d brd ff:ff:ff:ff:ff:ff<br>
14: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UNKNOWN qlen 1000<br>
link/ether fe:16:3e:3f:fb:ec brd ff:ff:ff:ff:ff:ff<br>
inet6 fe80::fc16:3eff:fe3f:fbec/64 scope link <br>
valid_lft forever preferred_lft forever<br>
15: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master vmNet state UNKNOWN qlen 1000<br>
link/ether fe:1a:4a:16:01:51 brd ff:ff:ff:ff:ff:ff<br>
inet6 fe80::fc1a:4aff:fe16:151/64 scope link <br>
valid_lft forever preferred_lft forever<br>
16: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master vmNet state UNKNOWN qlen 1000<br>
link/ether fe:1a:4a:16:01:52 brd ff:ff:ff:ff:ff:ff<br>
inet6 fe80::fc1a:4aff:fe16:152/64 scope link <br>
valid_lft forever preferred_lft forever<br>
</p>
<p>[07:57:50]root@ovirt730-01 ~ # ip route show<br>
default via 192.168.1.254 dev vmNet <br>
192.168.1.0/24 dev vmNet proto kernel scope link src
192.168.1.180 <br>
169.254.0.0/16 dev vmNet scope link metric 1008 <br>
169.254.0.0/16 dev ovirtmgmt scope link metric 1010 <br>
192.168.130.0/24 dev ovirtmgmt proto kernel scope link src
192.168.130.180 <br>
</p>
<p>[07:57:53]root@ovirt730-01 ~ # ip rule show<br>
0: from all lookup local <br>
32760: from all to 192.168.130.0/24 iif ovirtmgmt lookup
3232268980 <br>
32761: from 192.168.130.0/24 lookup 3232268980 <br>
32762: from all to 192.168.1.0/24 iif vmNet lookup 2308294836 <br>
32763: from 192.168.1.0/24 lookup 2308294836 <br>
32766: from all lookup main <br>
32767: from all lookup default <br>
[07:57:58]root@ovirt730-01 ~ # <br>
<br>
</p>
<br>
<div class="moz-cite-prefix">On 2017-04-10 07:54 AM, Charles Tassell
wrote:<br>
</div>
<blockquote
cite="mid:ba6a9823-8f79-11ce-3b5b-bda2bbba456d@islandadmin.ca"
type="cite">
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
<p>Hi Everyone,</p>
<p> Just an update, I installed a new Ubuntu guest VM and it was
doing the same thing regarding the network going down, then I
disabled IPv6 and it's been fine for the past 10-15 minutes. So
the issue seems to be IPv6 related, and I don't need IPv6 so I
can just turn it off. The eth1 NIC disappearing is still
worrisome though.<br>
</p>
<br>
<div class="moz-cite-prefix">On 2017-04-10 07:13 AM, Charles
Tassell wrote:<br>
</div>
<blockquote
cite="mid:208a3a45-ad2a-4cea-82c1-474553cff236@gmail.com"
type="cite">
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
<div class="moz-cite-prefix">Hi Everyone,<br>
<br>
Thanks for the help, answers below.<br>
<br>
On 2017-04-10 05:27 AM, Sandro Bonazzola wrote:<br>
</div>
<blockquote
cite="mid:CAPQRNT=w+P46u+Qter3-6yKPVqYogoErLWB66keLBQt7Up0KqA@mail.gmail.com"
type="cite">
<div dir="ltr">Adding Simone and Martin, replying
inline.<br>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Mon, Apr 10, 2017 at 10:16 AM,
Ondrej Svoboda <span dir="ltr"><<a
moz-do-not-send="true"
href="mailto:osvoboda@redhat.com"
target="_blank">osvoboda(a)redhat.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div>Hello Charles,<br>
<br>
</div>
<div>First, can you give us more information
regarding the duplicated IPv6 addresses? Since you
are going to reinstall the hosted engine, could
you make sure that NetworkManager is disabled
before adding the second vNIC (and perhaps even
disable IPv6 and reboot as well, so we have a
solid base and see what makes the difference)?<br>
</div>
</div>
</blockquote>
</div>
</div>
</div>
</blockquote>
I disabled NetworkManager on the hosts (systemctl disable
NetworkManager ; service NetworkManager stop) before doing the
oVirt setup and rebooted to make sure that it didn't come back
up. Or are you referring to on the hosted engine VM? I just
removed and re-added the eth1 NIC in the hosted engine, and this
is what showed up in dmesg:<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: [1af4:1000] type 00
class 0x020000<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x10: [io
0x0000-0x001f]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x14: [mem
0x00000000-0x00000fff]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x20: [mem
0x00000000-0x00003fff 64bit pref]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: reg 0x30: [mem
0x00000000-0x0003ffff pref]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 6: assigned
[mem 0xc0000000-0xc003ffff pref]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 4: assigned
[mem 0xc0040000-0xc0043fff 64bit pref]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 1: assigned
[mem 0xc0044000-0xc0044fff]<br>
[Mon Apr 10 06:46:43 2017] pci 0000:00:08.0: BAR 0: assigned
[io 0x1000-0x101f]<br>
[Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: enabling
device (0000 -> 0003)<br>
[Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: irq 35 for
MSI/MSI-X<br>
[Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: irq 36 for
MSI/MSI-X<br>
[Mon Apr 10 06:46:43 2017] virtio-pci 0000:00:08.0: irq 37 for
MSI/MSI-X<br>
[Mon Apr 10 06:46:43 2017] IPv6: ADDRCONF(NETDEV_UP): eth1: link
is not ready<br>
[Mon Apr 10 06:46:43 2017] IPv6: eth1: IPv6 duplicate address
fe80::21a:4aff:fe16:151 detected!<br>
<br>
Then when the network dropped I started getting these:<br>
<br>
[Mon Apr 10 06:48:00 2017] IPv6: eth1: IPv6 duplicate address
2001:410:e000:902:21a:4aff:fe16:151 detected!<br>
[Mon Apr 10 06:48:00 2017] IPv6: eth1: IPv6 duplicate address
2001:410:e000:902:21a:4aff:fe16:151 detected!<br>
[Mon Apr 10 06:49:51 2017] IPv6: eth1: IPv6 duplicate address
2001:410:e000:902:21a:4aff:fe16:151 detected!<br>
[Mon Apr 10 06:51:40 2017] IPv6: eth1: IPv6 duplicate address
2001:410:e000:902:21a:4aff:fe16:151 detected!<br>
<br>
The network on eth1 would go down for a few seconds then come
back up, but networking stays solid on eth0. I disabled
NetworkManager on the HE VM as well to see if that makes a
difference. I also disabled IPv6 with sysctl to see if that
helps. I'll install a Ubuntu VM on the cluster later today and
see if it has a similar issue.<br>
<br>
<br>
<blockquote
cite="mid:CAPQRNT=w+P46u+Qter3-6yKPVqYogoErLWB66keLBQt7Up0KqA@mail.gmail.com"
type="cite">
<div dir="ltr">
<div class="gmail_extra">
<div class="gmail_quote">
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div><br>
What kind of documentation did you follow to
install the hosted engine? Was it this page? <a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/"
target="_blank">https://www.ovirt.org/<wbr>documentati...
If so, could you file a bug against VDSM
networking and attach /var/log/vdsm/vdsm.log and
supervdsm.log, and make sure they include the time
period from adding the second vNIC to rebooting?<br>
<br>
</div>
<div>Second, even the vNIC going missing after
reboot looks like a bug to me. Even though eth1
does not exist in the VM, can you see it defined
for the VM in the engine web GUI?<br>
</div>
</div>
</blockquote>
<div><br>
</div>
<div>If the HE vm configuration wasn't flushed to the
OVF_STORE yet, it make sense it disappeared on
restart.</div>
<div><br>
</div>
<div> </div>
</div>
</div>
</div>
</blockquote>
The docs I used were <a moz-do-not-send="true"
class="moz-txt-link-freetext"
href="https://access.redhat.com/documentation/en-us/red_hat_virtuali...
which someone on the list pointed me to last week as being more
up-to-date than what was on the website (the docs on the website
don't seem to mention that you need to put the HE on it's own
datastore and look to be more geared towards bare-metal engine
rather than the VM self hosted option.)<br>
<br>
When I went back into the GUI and looked at the hosted engine
config the second NIC was listed there, but it wasn't showing up
in lspci on the VM. I removed the NIC in the GUI and re-added
it, and the device appeared again on the VM. What is the proper
way to "save" the state of the VM so that the OVF_STORE gets
updated? When I do anything on the HE VM that I want to test I
just type "reboot", but that powers down the VM. I then login
to my host and run "hosted-engine --vm-start" which restarts it,
but of course the last time I did that it restarted without the
second NIC.<br>
<br>
<blockquote
cite="mid:CAPQRNT=w+P46u+Qter3-6yKPVqYogoErLWB66keLBQt7Up0KqA@mail.gmail.com"
type="cite">
<div dir="ltr">
<div class="gmail_extra">
<div class="gmail_quote">
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div><br>
</div>
<div>The steps you took to install the hosted engine
with regards to networking look good to me, but I
believe Sandro (CC'ed) would be able to give more
advice.<br>
<br>
Sandro, since we want to configure bonding, would
you recommend to install the engine physically
first, move it to a VM, according to the following
method, and only then reconfigure networking? <a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/self-hosted/chap-Migrating...
target="_blank">https://www.ovirt.org/<wbr>documentati...
</div>
</blockquote>
<div><br>
</div>
<div><br>
</div>
<div>I don't see why a diret HE deployment couldn't be
done. Simone, Martin can you help here?</div>
<div> </div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div><br>
<br>
</div>
<div>Thank you,<br>
</div>
<div>Ondra<br>
</div>
</div>
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra"><br>
<div class="gmail_quote">On Mon, Apr 10, 2017 at
8:51 AM, Charles Tassell <span
dir="ltr"><<a
moz-do-not-send="true"
href="mailto:ctassell@gmail.com"
target="_blank">ctassell(a)gmail.com</a>&gt;</span>
wrote:<br>
<blockquote class="gmail_quote"
style="margin:0 0 0 .8ex;border-left:1px
#ccc solid;padding-left:1ex">Hi Everyone,<br>
<br>
Okay, I'm again having problems with
getting basic networking setup with oVirt
4.1 Here is my situation. I have two
servers I want to use to create an oVirt
cluster, with two different networks. My
"public" network is a 1G link on device em1
connected to my Internet feed, and my
"storage" network is a 10G link connected on
device p5p1 to my file server. Since I need
to connect to my storage network in order to
do the install, I selected p5p1 has the
ovirtmgmt interface when installing the
hosted engine. That worked fine, I got
everything installed, so I used some
ssh-proxy magic to connect to the web
console and completed the install (setup a
Storage domain and create a new network
vmNet for VM networking and added em1 to
it.)<br>
<br>
The problem was that when I added a second
network device to the HostedEngine VM (so
that I can connect to it from my public
network) it would intermittently go down. I
did some digging and found some IPV6 errors
in the dmesg (IPv6: eth1: IPv6 duplicate
address 2001:410:e000:902:21a:4aff:fe1<wbr>6:151
detected!) so I disabled IPv6 on both eth0
and eth1 in the HostedEngine and rebooted
it. The problem is that when I restarted
the VM, the eth1 device was missing.<br>
<br>
So, my question is: Can I add a second NIC
to the HostedEngine VM and make it stick, or
will it be deleted whenever the engine VM is
restarted? </blockquote>
</div>
</div>
</div>
</div>
</blockquote>
<div><br>
</div>
<div>When you change something in the HE Vm using the
web ui, it has to be saved also on the OVF_STORE to
make it permanent for further reboot.</div>
<div>Martin can you please elaborate here?</div>
<div><br>
</div>
<div><br>
</div>
<div> </div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="HOEnZb">
<div class="h5">
<div class="gmail_extra">
<div class="gmail_quote">
<blockquote class="gmail_quote"
style="margin:0 0 0 .8ex;border-left:1px
#ccc solid;padding-left:1ex">Is there a
better way to do what I'm trying to do, ie,
should I setup ovirtmgmt on the public em1
interface, and then create the "storage"
network after the fact for connecting to the
datastores and such. Is that even possible,
or required? I was thinking that it would
be better for migrations and other
management functions to happen on the faster
10G network, but if the HostedEngine doesn't
need to be able to connect to the storage
network maybe it's not worth the effort?<br>
<br>
Eventually I want to setup LACP on the
storage network, but I had to wipe the
servers and reinstall from scratch the last
time I tried to set that up. I was thinking
that it was because I setup the bonding
before installing oVirt, so I didn't do that
this time.<br>
<br>
Here are my
/etc/sysconfig/network-scripts<wbr>/ifcfg-*
files in case I did something wrong there
(I'm more familiar with Debian/Ubuntu
network setup than CentOS)<br>
<br>
ifcfg-eth0: (ovirtmgmt aka storage)<br>
----------------<br>
BROADCAST=192.168.130.255<br>
NETMASK=255.255.255.0<br>
BOOTPROTO=static<br>
DEVICE=eth0<br>
IPADDR=192.168.130.179<br>
ONBOOT=yes<br>
DOMAIN=<a moz-do-not-send="true"
href="http://public.net"
rel="noreferrer"
target="_blank">public.net</a><br>
ZONE=public<br>
IPV6INIT=no<br>
<br>
<br>
ifcfg-eth1: (vmNet aka Internet)<br>
----------------<br>
BROADCAST=192.168.1.255<br>
NETMASK=255.255.255.0<br>
BOOTPROTO=static<br>
DEVICE=eth1<br>
IPADDR=192.168.1.179<br>
GATEWAY=192.168.1.254<br>
ONBOOT=yes<br>
DNS1=192.168.1.1<br>
DNS2=192.168.1.2<br>
DOMAIN=<a moz-do-not-send="true"
href="http://public.net"
rel="noreferrer"
target="_blank">public.net</a><br>
ZONE=public<br>
IPV6INIT=no<br>
<br>
______________________________<wbr>_________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
rel="noreferrer"
target="_blank">http://lists.ovirt.org/mailman<wbr>/li...
</blockquote>
</div>
<br>
</div>
</div>
</div>
</blockquote>
</div>
<br>
<br clear="all">
<div><br>
</div>
-- <br>
<div class="gmail_signature"
data-smartmail="gmail_signature">
<div dir="ltr">
<div>
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<div dir="ltr">
<p
style="color:rgb(0,0,0);font-family:overpass,sans-serif;font-weight:bold;margin:0px;padding:0px;font-size:14px;text-transform:uppercase"><span>SANDRO</span> <span>BONAZZOLA</span></p>
<p
style="color:rgb(0,0,0);font-family:overpass,sans-serif;font-size:10px;margin:0px
0px
4px;text-transform:uppercase"><span>ASSOCIATE
MANAGER, SOFTWARE ENGINEERING, EMEA ENG
VIRTUALIZATION R&D</span></p>
<p
style="font-family:overpass,sans-serif;margin:0px;font-size:10px;color:rgb(153,153,153)"><a
moz-do-not-send="true"
href="https://www.redhat.com/"
style="color:rgb(0,136,206);margin:0px"
target="_blank">Red
Hat <span>EMEA</span></a></p>
<table
style="color:rgb(0,0,0);font-family:overpass,sans-serif;font-size:medium"
border="0">
<tbody>
<tr>
<td width="100px"><a
moz-do-not-send="true"
href="https://red.ht/sig"
target="_blank"><img
moz-do-not-send="true"
src="https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo...
height="auto"
width="90"></a></td>
<td style="font-size:10px">
<div><a moz-do-not-send="true"
href="https://redhat.com/trusted"
style="color:rgb(204,0,0);font-weight:bold" target="_blank">TRIED.
TESTED. TRUSTED.</a></div>
</td>
</tr>
</tbody>
</table>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
<p><br>
</p>
</blockquote>
<br>
</blockquote>
<br>
</body>
</html>
--------------E7D352D155AD6C0A5C0DC171--
![src="https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo...](http://src="https://www.redhat.com/profiles/rh/themes/redhatdotcom/img/logo-red-hat-black.png%22){kind=link}