Re: [ovirt-users] hosted-engine cant access engine appliance

Attached the VDSM logs from 'hosted-engine --deploy' to 'hosted-engine --console'

Am 08.11.2016 um 10:43 schrieb Simone Tiraboschi: On Tue, Nov 8, 2016 at 9:35 AM, Steffen Nolden <steffen.nolden(a)alumni.fh- aachen.de> wrote: > Hello Florian, > > there is no problem to reslove the FQDN > Can you please attach also VDSM logs fro the relevant time frame? > [nolden@oVirtNode01 ~]$ nslookup oVirtEngine.com > Server: 192.168.122.1 > Address: 192.168.122.1#53 > > Name: oVirtEngine.com > Address: 192.168.122.201 > > The '/etc/hosts' file of each host is configured to resolve the name. > > I tried it with stopped firewall, > > [nolden@oVirtNode01 ~]$ sudo systemctl stop firewalld > [nolden@oVirtNode01 ~]$ sudo systemctl status firewalld > ● firewalld.service - firewalld - dynamic firewall daemon > Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; > vendor preset: enabled) > Active: inactive (dead) since Di 2016-11-08 09:10:46 CET; 3s ago > Process: 724 ExecStart=/usr/sbin/firewalld --nofork --nopid > $FIREWALLD_ARGS (code=exited, status=0/SUCCESS) > Main PID: 724 (code=exited, status=0/SUCCESS) > > but i got the same error! > > > Am 04.11.2016 um 15:50 schrieb Florian Nolden: > > Hello Steffen, > > can your nodes resolve the FQDN "ovirtengine.com" to the hosted engine > ip ( nslookup ovirtengine.com) ? > If that works have you tried to disable the firewall temporarily? > > 2016-11-04 14:11 GMT+01:00 Steffen Nolden <steffen.nolden(a)alumni.fh-aach > en.de>: > >> Hello, >> >> i tried to deploy hosted-engine on a testing environment. First of all i >> tried to deploy with the option >> >> "Automatically execute engine-setup on the engine appliance on first >> boot (Yes, No)[Yes]? Yes" >> >> but it got stuck. >> >> [ INFO ] Running engine-setup on the appliance >> [ ERROR ] Engine setup got stuck on the appliance >> [ ERROR ] Failed to execute stage 'Closing up': Engine setup is stalled >> on the appliance since 600 seconds ago. Please check its log on the >> appliance. >> [ INFO ] Stage: Clean up >> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- >> setup/answers/answers-20161104112913.conf' >> [ INFO ] Stage: Pre-termination >> [ INFO ] Stage: Termination >> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, >> please check the issue,fix and redeploy >> Log file is located at /var/log/ovirt-hosted-engine-s >> etup/ovirt-hosted-engine-setup-20161104110104-kyhq1e.log >> >> Next try i said 'No' and i tried to execute it myself. But i can't >> access the engine appliance. >> >> [nolden@oVirtNode01 ~]$ sudo hosted-engine --console >> /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses >> xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli >> from vdsm import utils, vdscli, constants >> The engine VM is running on this host >> Verbunden mit der Domain: HostedEngine >> Escape-Zeichen ist ^] >> Fehler: Interner Fehler: Charakter-Einheit console0 verwendet nicht >> ein PTY >> >> Additionally i can't ping or access the engine appliance via ssh. >> >> Did i forget to install a packege or configure something? >> >> Below my infrastructure and configs. Attached the log file. >> >> >> Thanks for help. >> >> >> >> My infrastructure is a nestedVM system: >> All systems have nested visualization activated >> >> HW with LinuxMint x86_64; >> - VM with CentOS-7-x86_64; 24GB Ram; 7 cores; >> - Nested VM with CentOS-7-x86_64; 12288GB Ram; 4 cores; Hostname: >> oVirtNode01.com (192.168.122.101): Here i deploy hosted-engine, Hostname: >> oVirtEngine.com (192.168.122.201) >> - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; Hostname: >> oVirtNode02.com (192.168.122.102): >> - Nested VM with CentOS-7-x86_64; 4096GB Ram; 1 cores; Hostname: >> oVirtNode03.com (192.168.122.103): >> >> All three NestedVMs are updated, have installed the ovirt-release40.rpm. >> Additional installed: >> screen (4.1.0), ovirt-hosted-engine-setup (2.0.2.2), vdsm-gluster >> (4.18.13), bridge-utils (1.5), >> vdsm (4.18.13), vdsm-cli (4.18.13), glusterfs-server (3.7.16), samba. >> >> First NestedVM additional installed ovirt-engine-appliance >> 4.0-20160928.1.el7.centos >> >> The three VMs building a glusterfs volume "engine" 3 replica, with the >> options... >> >> Volume Name: engine >> Type: Replicate >> Volume ID: e92849b7-af3b-4ccd-bd0d-69a5ab3b6214 >> Status: Started >> Number of Bricks: 1 x 3 = 3 >> Transport-type: tcp >> Bricks: >> Brick1: oVirtNode01.com:/gluster/engine/brick1 >> Brick2: oVirtNode02.com:/gluster/engine/brick1 >> Brick3: oVirtNode03.com:/gluster/engine/brick1 >> Options Reconfigured: >> auth.allow: 192.168.122.* >> storage.owner-gid: 36 >> storage.owner-uid: 36 >> performance.readdir-ahead: on >> >> ## Session 1 (hosted-engine deploy without automatically execute >> engine-setup) >> [nolden@oVirtNode01 ~]$ sudo hosted-engine --deploy >> /usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/storage_backends.py:15: >> DeprecationWarning: vdscli uses xmlrpc. since ovirt 3.6 xmlrpc is >> deprecated, please use vdsm.jsonrpcvdscli >> import vdsm.vdscli >> [ INFO ] Stage: Initializing >> [ INFO ] Generating a temporary VNC password. >> [ INFO ] Stage: Environment setup >> During customization use CTRL-D to abort. >> Continuing will configure this host for serving as hypervisor >> and create a VM where you have to install the engine afterwards. >> Are you sure you want to continue? (Yes, No)[Yes]: >> [ INFO ] Hardware supports virtualization >> Configuration files: [] >> Log file: /var/log/ovirt-hosted-engine-s >> etup/ovirt-hosted-engine-setup-20161104123834-chwikf.log >> Version: otopi-1.5.2 (otopi-1.5.2-1.el7.centos) >> [ INFO ] Stage: Environment packages setup >> [ INFO ] Stage: Programs detection >> [ INFO ] Stage: Environment setup >> [ INFO ] Generating libvirt-spice certificates >> [ INFO ] Stage: Environment customization >> >> --== STORAGE CONFIGURATION ==-- >> >> Please specify the storage you would like to use (glusterfs, >> iscsi, fc, nfs3, nfs4)[nfs3]: glusterfs >> [ INFO ] Please note that Replica 3 support is required for the shared >> storage. >> Please specify the full shared storage connection path to use >> (example: host:/path): oVirtNode01.com:/engine >> [ INFO ] GlusterFS replica 3 Volume detected >> [ INFO ] Installing on first host >> [ INFO ] GlusterFS replica 3 Volume detected >> >> --== SYSTEM CONFIGURATION ==-- >> >> >> --== NETWORK CONFIGURATION ==-- >> >> iptables was detected on your computer, do you wish setup to >> configure it? (Yes, No)[Yes]: No >> Please indicate a pingable gateway IP address [192.168.122.1]: >> Please indicate a nic to set ovirtmgmt bridge on: (eth0) >> [eth0]: >> >> --== VM CONFIGURATION ==-- >> >> Booting from cdrom on RHEL7 is ISO image based only, as cdrom >> passthrough is disabled (BZ760885) >> Please specify the device to boot the VM from (choose disk for >> the oVirt engine appliance) >> (cdrom, disk, pxe) [disk]: >> Please specify the console type you would like to use to >> connect to the VM (vnc, spice) [vnc]: >> [ INFO ] Detecting available oVirt engine appliances >> The following appliance have been found on your system: >> [1] - The oVirt Engine Appliance image (OVA) - >> 4.0-20160928.1.el7.centos >> [2] - Directly select an OVA file >> Please select an appliance (1, 2) [1]: >> [ INFO ] Verifying its sha1sum >> [ INFO ] Checking OVF archive content (could take a few minutes >> depending on archive size) >> [ INFO ] Checking OVF XML content (could take a few minutes depending >> on archive size) >> [WARNING] OVF does not contain a valid image description, using default. >> Would you like to use cloud-init to customize the appliance on >> the first boot (Yes, No)[Yes]? >> Would you like to generate on-fly a cloud-init ISO image (of >> no-cloud type) >> or do you have an existing one (Generate, Existing)[Generate]? >> Please provide the FQDN you would like to use for the engine >> appliance. >> Note: This will be the FQDN of the engine VM you are now going >> to launch, >> it should not point to the base host or to any other existing >> machine. >> Engine VM FQDN: (leave it empty to skip): []: oVirtEngine.com >> Automatically execute engine-setup on the engine appliance on >> first boot (Yes, No)[Yes]? No >> Please provide the domain name you would like to use for the >> engine appliance. >> Engine VM domain: [com] >> Enter root password that will be used for the engine appliance >> (leave it empty to skip): >> Confirm appliance root password: >> The following CPU types are supported by this host: >> - model_SandyBridge: Intel SandyBridge Family >> - model_Westmere: Intel Westmere Family >> - model_Nehalem: Intel Nehalem Family >> - model_Penryn: Intel Penryn Family >> - model_Conroe: Intel Conroe Family >> Please specify the CPU type to be used by the VM >> [model_SandyBridge]: >> Please specify the number of virtual CPUs for the VM (Defaults >> to appliance OVF value): [4]: 3 >> [WARNING] Minimum requirements for disk size not met >> You may specify a unicast MAC address for the VM or accept a >> randomly generated default [00:16:3e:2a:82:17]: >> Please specify the memory size of the VM in MB (Defaults to >> maximum available): [10880]: 8144 >> How should the engine VM network be configured (DHCP, >> Static)[DHCP]? Static >> Please enter the IP address to be used for the engine VM >> [192.168.122.2]: 192.168.122.201 >> [ INFO ] The engine VM will be configured to use 192.168.122.201/24 >> Please provide a comma-separated list (max 3) of IP addresses >> of domain name servers for the engine VM >> Engine VM DNS (leave it empty to skip) [192.168.122.1]: >> Add lines for the appliance itself and for this host to >> /etc/hosts on the engine VM? >> Note: ensuring that this host could resolve the engine VM >> hostname is still up to you >> (Yes, No)[No] Yes >> >> --== HOSTED ENGINE CONFIGURATION ==-- >> >> Enter engine admin password: >> Confirm engine admin password: >> Enter the name which will be used to identify this host inside >> the Administrator Portal [hosted_engine_1]: >> Please provide the name of the SMTP server through which we >> will send notifications [localhost]: >> Please provide the TCP port number of the SMTP server [25]: >> Please provide the email address from which notifications will >> be sent [root@localhost]: >> Please provide a comma-separated list of email addresses which >> will get notifications [root@localhost]: >> [ INFO ] Stage: Setup validation >> >> --== CONFIGURATION PREVIEW ==-- >> >> Bridge interface : eth0 >> Engine FQDN : oVirtEngine.com >> Bridge name : ovirtmgmt >> Host address : oVirtNode01 >> SSH daemon port : 22 >> Gateway address : 192.168.122.1 >> Host name for web application : hosted_engine_1 >> Storage Domain type : glusterfs >> Host ID : 1 >> Image size GB : 10 >> Storage connection : oVirtNode01.com:/engine >> Console type : vnc >> Memory size MB : 8144 >> MAC address : 00:16:3e:2a:82:17 >> Boot type : disk >> Number of CPUs : 3 >> OVF archive (for disk boot) : >> /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.0 >> -20160928.1.el7.centos.ova >> Appliance version : 4.0-20160928.1.el7.centos >> CPU Type : model_SandyBridge >> >> Please confirm installation settings (Yes, No)[Yes]: >> [ INFO ] Stage: Transaction setup >> ... >> [ INFO ] Stage: Closing up >> The following network ports should be opened: >> tcp:5900 >> tcp:5901 >> tcp:9090 >> udp:5900 >> udp:5901 >> An example of the required configuration for iptables can be >> found at: >> /etc/ovirt-hosted-engine/iptables.example >> In order to configure firewalld, copy the files from >> /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services >> and execute the following commands: >> firewall-cmd -service hosted-cockpit >> firewall-cmd -service hosted-console >> [ INFO ] Creating VM >> You can now connect to the VM with the following command: >> hosted-engine --console >> You can also graphically connect to the VM from your system >> with the following command: >> remote-viewer vnc://oVirtNode01:5900 >> Use temporary password "2263CpET" to connect to vnc console. >> Please ensure that your Guest OS is properly configured to >> support serial console according to your distro documentation. >> Follow http://www.ovirt.org/Serial_Co >> nsole_Setup#I_need_to_access_the_console_the_old_way for more info. >> If you need to reboot the VM you will need to start it >> manually using the command: >> hosted-engine --vm-start >> You can then set a temporary password using the command: >> hosted-engine --add-console-password >> Please install and setup the engine in the VM. >> You may also be interested in installing >> ovirt-guest-agent-common package in the VM. >> >> >> The VM has been rebooted. >> To continue please install oVirt-Engine in the VM >> (Follow http://www.ovirt.org/Quick_Start_Guide for more info). >> >> Make a selection from the options below: >> (1) Continue setup - oVirt-Engine installation is ready and >> ovirt-engine service is up >> (2) Abort setup >> (3) Power off and restart the VM >> (4) Destroy VM and abort setup >> >> (1, 2, 3, 4)[1]: >> ## Session 2 >> [nolden@oVirtNode01 ~]$ sudo hosted-engine --console >> /usr/share/vdsm/vdsClient.py:33: DeprecationWarning: vdscli uses >> xmlrpc. since ovirt 3.6 xmlrpc is deprecated, please use vdsm.jsonrpcvdscli >> from vdsm import utils, vdscli, constants >> The engine VM is running on this host >> Verbunden mit der Domain: HostedEngine >> Escape-Zeichen ist ^] >> Fehler: Interner Fehler: Charakter-Einheit console0 verwendet nicht ein >> PTY >> [nolden@oVirtNode01 ~]$ ssh root(a)oVirtEngine.com >> ssh: connect to host ovirtengine.com port 22: No route to host >> >> ## Back to session 1 >> ... >> (1, 2, 3, 4)[1]: 1 >> >> Checking for oVirt-Engine status at oVirtEngine.com... >> [ INFO ] Engine is still unreachable >> oVirt-Engine health status page is not yet reachable. >> >> >> The VM has been rebooted. >> To continue please install oVirt-Engine in the VM >> (Follow http://www.ovirt.org/Quick_Start_Guide for more info). >> >> Make a selection from the options below: >> (1) Continue setup - oVirt-Engine installation is ready and >> ovirt-engine service is up >> (2) Abort setup >> (3) Power off and restart the VM >> (4) Destroy VM and abort setup >> >> (1, 2, 3, 4)[1]: 2 >> [ ERROR ] Failed to execute stage 'Closing up': Setup aborted by user >> [ INFO ] Stage: Clean up >> [ INFO ] Generating answer file '/var/lib/ovirt-hosted-engine- >> setup/answers/answers-20161104130223.conf' >> [ INFO ] Stage: Pre-termination >> [ INFO ] Stage: Termination >> [ ERROR ] Hosted Engine deployment failed: this system is not reliable, >> please check the issue,fix and redeploy >> Log file is located at /var/log/ovirt-hosted-engine-s >> etup/ovirt-hosted-engine-setup-20161104123834-chwikf.log >> >> >> _______________________________________________ >> Users mailing list >> Users(a)ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> >> > > > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users