Hi Strahil
Hope you are well. I get the following error when I tried to confirm reboot:
Error while executing action: Cannot confirm 'Host has been rebooted' Host.
Valid Host statuses are "Non operational", "Maintenance" or
"Connecting".
And I can't put it in maintenance, only option is "restart" or
"stop".
Regards
Nar
On Thu, 6 Aug 2020 at 06:16, Strahil Nikolov <hunter86_bg(a)yahoo.com> wrote:
After rebooting the node, have you "marked" it that it was
rebooted ?
Best Regards,
Strahil Nikolov
На 5 август 2020 г. 21:29:04 GMT+03:00, Nardus Geldenhuys <
nardusg(a)gmail.com> написа:
>Hi oVirt land
>
>Hope you are well. Got a bit of an issue, actually a big issue. We had
>some
>sort of dip of some sort. All the VM's is still running, but some of
>the
>hosts is show "Unassigned" or "NonResponsive". So all the hosts
was
>showing
>UP and was fine before our dip. So I did increase vdsHeartbeatInSecond
>to
>240, no luck.
>
>I still get a timeout on the engine lock even thou I can connect to
>that
>host from the engine using nc to test to port 54321. I also did restart
>vdsmd and also rebooted the host with no luck.
>
> nc -v someserver 54321
>Ncat: Version 7.50 (
https://nmap.org/ncat )
>Ncat: Connected to 172.40.2.172:54321.
>
>2020-08-05 20:20:34,256+02 ERROR
>[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>(EE-ManagedThreadFactory-engineScheduled-Thread-70) [] EVENT_ID:
>VDS_BROKER_COMMAND_FAILURE(10,802), VDSM someserver command Get Host
>Capabilities failed: Message timeout which can be caused by
>communication
>issues
>
>Any troubleshoot ideas will be gladly appreciated.
>
>Regards
>
>Nar