1:35 p.m.
On 05/15/2014 04:26 AM, Matt . wrote:
Itamar,
On some testhost I'm updating now to 3.4(.x) I also need to install the
hook it seems... it's not there by default.
Any idea why you thought it should be ?
there is no need for the hook for port mirroring. you can define a vnic
profile with port mirroring via the engine and vdsm has this feature
built-in.
if you need more than just port mirroring (say, port forwarding), then
you still need the hook.
Cheers,
Matt
2014-05-12 14:55 GMT+02:00 Matt . <yamakasi.014(a)gmail.com
<mailto:yamakasi.014@gmail.com>>:
Hi,
I really needed to enable the hook... Will investigate on new hosts!
2014-05-11 22:37 GMT+02:00 Itamar Heim <iheim(a)redhat.com
<mailto:iheim@redhat.com>>:
On 04/17/2014 04:08 AM, Matt . wrote:
Hi Guys,
I'm not able to write a howto yet as we need to check how
this is
running on high traffic and we are going soon. Than, we need
to test
some other functions before I can actually write something down.
Because this is not all documented well indeed I'm in
testmode and doing
some @ life system as reallife environments are always
coming with other
things than your prefec test.
I cannot say I needed promiscuouity, I did some things you would
normally do on pfsense which fixed that part. Some old
message you
really need to discard instead of clicking it away was
confusing this test.
you are not supposed to need the promiscious hook for
sniffing/mirroring - that's by now part of engine/vdsm (at vnic
level in earlier versions, and at network profile in later
versions iirc)
2014-04-17 9:08 GMT+02:00 Dan Kenigsberg <danken(a)redhat.com
<mailto:danken@redhat.com>
<mailto:danken@redhat.com <mailto:danken@redhat.com>>>:
On Thu, Apr 17, 2014 at 01:11:13AM +0200, Matt . wrote:
> OK, also this is finetuned, but it would be nice to
have some
more info
> about the hooks in these cases... it's interesting
as oVirt has
the right
> settings to start with but we need to know what we
need to set
when we have
> a setup like this for an example.
Could you explain what you have done, and what do you
need promiscuouity
for? oVirt has "port mirroring" that allows to mirror
ip traffic from
one vm network to another.
>
>
> 2014-04-17 0:35 GMT+02:00 Matt .
<yamakasi.014(a)gmail.com <mailto:yamakasi.014@gmail.com>
<mailto:yamakasi.014@gmail.com
<mailto:yamakasi.014@gmail.com>__>>:
>
> > Traffic issues are solved, but the advertising in
not that well.
> >
> > I see on ESXi (vSphere) that you need to enable
"Promiscuous
Mode", but
> > how on oVirt ?
> >
> >
http://www.blissfulidiot.com/__2013/11/using-carp-with-__vmware-esxi.html
<http://www.blissfulidiot.com/2013/11/using-carp-with-vmware-esxi.html>
> >
> > Do I need the vdsm-hook-promisc for it ? as I need
to make real
settings
> > on a VM there I think the vswitch only needs the mode.
> >
> > Information is welcome!
_________________________________________________
Users mailing list
Users(a)ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/__mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>