On Wed, May 11, 2016 at 8:55 AM, Tomas Jelinek <tjelinek(a)redhat.com> wrote:
Hi Ladi,
do you know if the upstream virtio drivers are correctly signed?
In particular:
http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools...
This is one of the first builds signed only with the new SHA-2 based
certificate which is not supported on Windows 7 out-of-the-box.
Installing a hotfix per:
As for the original BSOD, the problem there was trying to load Win8
vioscsi.sys on Win7 and should be fixed by pointing Windows to the
Win7 subdirectory like you wrote.
Relevant bugs:
thank you,
Tomas
----- Original Message -----
> From: "Arman Khalatyan" <arm2arm(a)gmail.com>
> To: "Cam Mac" <iucounu(a)gmail.com>
> Cc: "Tomas Jelinek" <tjelinek(a)redhat.com>, "users"
<users(a)ovirt.org>
> Sent: Tuesday, May 10, 2016 9:19:49 PM
> Subject: Re: [ovirt-users] vioscsi.sys BSOD with Win 7
>
> Same bsod was with win2008 server, in order to fix it we changed nics to
> e1000 and disks to IDE. Now it boots w/o trouble.
> Am 10.05.2016 7:43 nachm. schrieb "Cam Mac" <iucounu(a)gmail.com>:
>
> > Hi Tomas,
> >
> > The install went ok, but Windows complains:
> >
> > "File: \windows\system32\drivers\vioscsi.sys
> > status: 0xc0000428
> > Windows cannot verify the digital signature for this file"
> >
> > Regards,
> >
> > Campbell
> >
> > On Tue, May 10, 2016 at 6:29 PM, Cam Mac <iucounu(a)gmail.com> wrote:
> >
> >> Hi Tomas,
> >>
> >> Thanks, I will test that later tonight and let you know.
> >>
> >> Regards,
> >>
> >> Cam
> >>
> >> On Tue, May 10, 2016 at 3:28 PM, Tomas Jelinek <tjelinek(a)redhat.com>
> >> wrote:
> >>
> >>> Hi,
> >>>
> >>> please try to install this guest tools:
> >>>
> >>>
http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools...
> >>>
> >>> Also please make sure you point windows to the correct driver in the
> >>> sub-directory for w7
> >>>
> >>> Tomas
> >>>
> >>> ----- Original Message -----
> >>> > From: "Cam Mac" <iucounu(a)gmail.com>
> >>> > To: users(a)ovirt.org
> >>> > Sent: Monday, May 9, 2016 7:28:57 PM
> >>> > Subject: [ovirt-users] vioscsi.sys BSOD with Win 7
> >>> >
> >>> > Hi,
> >>> >
> >>> > I'm running oVirt 3.6.3.4-1.el7.centos and when I install a Win
7
> >>> guest VM,
> >>> > using VirtIO disk, networking etc, it goes through the install
process
> >>> ok,
> >>> > but blue screens upon boot with a vioscsi.sys error (attached). I
have
> >>> tried
> >>> > the official version ovirt-guest-tools-iso 3.6.0 0.2_master.fc22,
as
> >>> well as
> >>> > some earlier and later versions. I am using a PXE boot method with
a
> >>> Windows
> >>> > deployment server, which has the drivers from the oVirt tools ISO
> >>> installed
> >>> > (indeed, it picks up the drive and networking and I can see it
> >>> installing
> >>> > the drivers). I have tried with the generic IDE and rtl8139 config
on
> >>> the
> >>> > guest, and it also fails with the same vioscsi.sys error after
> >>> rebooting
> >>> > upon finishing installation even though I'm using IDE as the
disk
> >>> driver.
> >>> >
> >>> > I have uploaded a win 7 x64 ISO and tried installing that, and it
> >>> loads the
> >>> > VirtIO viostor driver (using the method at:
> >>> >
> >>>
https://www.ovirt.org/documentation/how-to/virtual-machines/create-a-wind...
> >>> > ), and even manages to partition the disks, but fails to install
on
> >>> the disk
> >>> > (screenshot attached).
> >>> >
> >>> > I've tried temporarily removing the vioscsi files from the
install
> >>> server as
> >>> > a last resort, but as expected it fails to install properly, though
I
> >>> > thought it used the viostor driver instead.
> >>> >
> >>> > Thanks for any help.
> >>> >
> >>> > Regards,
> >>> >
> >>> > Cam
> >>> >
> >>> > _______________________________________________
> >>> > Users mailing list
> >>> > Users(a)ovirt.org
> >>> >
http://lists.ovirt.org/mailman/listinfo/users
> >>> >
> >>>
> >>
> >>
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org
> >
http://lists.ovirt.org/mailman/listinfo/users
> >
> >
>