Re: [ovirt-users] configuring gluster volumes/bricks from ovirt ??

On 05/04/2017 01:55 PM, Matthias Leopold wrote: > > > Am 2017-05-04 um 10:21 schrieb knarra: >> On 05/04/2017 01:16 PM, Matthias Leopold wrote: >>> >>> >>> Am 2017-05-04 um 09:00 schrieb knarra: >>>> On 05/04/2017 12:28 PM, knarra wrote: >>>>> On 05/03/2017 07:44 PM, Matthias Leopold wrote: >>>>>> hi, >>>>>> >>>>>> >>>>>> i'm trying to get into this gluster thing with oVirt and added a 2 >>>>>> node gluster cluster to my oVirt 4.1 data center (just for >>>>>> testing, i >>>>>> know it can't have HA with 2 nodes). provisioning of the storage >>>>>> hosts did apparently work and my storage cluster seems to be >>>>>> operational. >>>>>> >>>>>> i have very little understanding of glusterfs right know, but what i >>>>>> think i am missing in the interface is a way to configure >>>>>> volumes/bricks on my gluster cluster/hosts so i can use them for >>>>>> storage domains (i want to use a "managed gluster volume"), the drop >>>>>> down "Gluster" in "New domain" is empty. all i could find for >>>>>> storage >>>>>> specific UI was the "Services" tab for the storage cluster which is >>>>>> empty. >>>>> once gluster hosts are added into the UI, user will be able to see >>>>> volumes created on that hosts and to use them as storage domains. For >>>>> this you will need to create a new storage domain with the mount path >>>>> as gluster volume path. >>>>>> >>>>>> i'm not using a hyperconverged/self-hosted setup, my engine is >>>>>> located on a dedicated server and i used iSCSI storage for data >>>>>> master domain. my hosts (for hypervisors and gluster storage) where >>>>>> installed on top of centos7, not using oVirt Node. >>>>>> >>>>>> does my setup make sense (it's only for testing)? >>>>>> do i have to configure gluster hosts manually? >>>>> yes, you will have to do this manually . >>>> Installing gluster packages have to done manually. Once gluster >>>> packages >>>> are installed you can create a gluster cluster from ovirt UI , add >>>> gluster hosts and create volumes on them using the volumes tab. >>> >>> i'm sorry, but i'm missing all these "Gluster Volumes" UI components >>> that are mentioned in >>> http://www.ovirt.org/develop/release-management/features/gluster/gluster-.... >>> >>> the tabs i see for my storage cluster are "General", "Logical >>> Networks", "Hosts", "Services", "Permissions". as i said "Services" is >>> empty, is that a problem? >>> >>> what's wrong? >>> >>> thx >>> matthias >>> >> Does your cluster has both virt+gluster enabled or only virt ? If only >> virt you will not be able to see them. >> >> If the cluster has both virt+gluster service enabled or only gluster >> service enabled you should be able to see them. >> > my storage cluster has only gluster service enabled > > matthias > > I think you have selected the cluster and you are referring to the sub tabs for that cluster. There should be a main tab called 'Volumes' which is present. Are you not seeing that? I have attached screenshot for the same.