7:21 a.m.
On Thu, Aug 22, 2019 at 1:08 PM Miguel Duarte de Mora Barroso <
mdbarroso(a)redhat.com> wrote:
On Sat, Aug 17, 2019 at 11:27 AM <ej.albany(a)gmail.com> wrote:
>
> Hello. I have been trying to figure out an issue for a very long time.
> That issue relates to the ethernet and 10gb fc links that I have on my
> cluster being disabled any time a migration occurs.
>
> I believe this is because I need to have STP turned on in order to
> participate with the switch. However, there does not seem to be any
> way to tell oVirt to stop turning it off! Very frustrating.
>
> After entering a cronjob that enables stp on all bridges every 1
> minute, the migration issue disappears....
>
> Is there any way at all to do without this cronjob and set STP to be
> ON without having to resort to such a silly solution?
Vdsm exposes a per bridge STP knob that you can use for this. By
default it is set to false, which is probably why you had to use this
shenanigan.
You can, for instance:
# show present state
[vagrant@vdsm ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 52:54:00:41:fb:37 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 52:54:00:83:5b:6f brd ff:ff:ff:ff:ff:ff
inet 192.168.50.50/24 brd 192.168.50.255 scope global noprefixroute
eth1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe83:5b6f/64 scope link
valid_lft forever preferred_lft forever
19: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group default qlen 1000
link/ether 8e:5c:2e:87:fa:0b brd ff:ff:ff:ff:ff:ff
# show example bridge configuration - you're looking for the STP knob here.
[root@vdsm ~]$ cat bridged_net_with_stp
{
"bondings": {},
"networks": {
"test-network": {
"nic": "eth0",
"switch": "legacy",
"bridged": true,
"stp": true
}
},
"options": {
"connectivityCheck": false
}
}
# issue setup networks command:
[root@vdsm ~]$ vdsm-client -f bridged_net_with_stp Host setupNetworks
{
"code": 0,
"message": "Done"
}
# show bridges
[root@vdsm ~]$ brctl show
bridge name bridge id STP enabled interfaces
;vdsmdummy; 8000.000000000000 no
test-network 8000.52540041fb37 yes eth0
# show final state
[root@vdsm ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
master test-network state UP group default qlen 1000
link/ether 52:54:00:41:fb:37 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP group default qlen 1000
link/ether 52:54:00:83:5b:6f brd ff:ff:ff:ff:ff:ff
inet 192.168.50.50/24 brd 192.168.50.255 scope global noprefixroute
eth1
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe83:5b6f/64 scope link
valid_lft forever preferred_lft forever
19: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
group default qlen 1000
link/ether 8e:5c:2e:87:fa:0b brd ff:ff:ff:ff:ff:ff
432: test-network: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP group default qlen 1000
link/ether 52:54:00:41:fb:37 brd ff:ff:ff:ff:ff:ff
I don't think this STP parameter is exposed via engine UI; @Dominik
Holler , could you confirm ? What are our plans for it ?
STP is only available via REST-API, see
http://ovirt.github.io/ovirt-engine-api-model/4.3/#types/network
please find an example how to enable STP in
https://gist.github.com/dominikholler/4e70c9ef9929d93b6807f56d43a70b95
We have no plans to add STP to the web ui,
but new feature requests are always welcome on
https://bugzilla.redhat.com/enter_bug.cgi?product=ovirt-engine
>
> Here are some details about my systems, if you need it.
>
>
> selinux is disabled.
>
>
>
>
>
>
>
>
>
> [root@swm-02 ~]# rpm -qa | grep ovirt
> ovirt-imageio-common-1.5.1-0.el7.x86_64
> ovirt-release43-4.3.5.2-1.el7.noarch
> ovirt-imageio-daemon-1.5.1-0.el7.noarch
> ovirt-vmconsole-host-1.0.7-2.el7.noarch
> ovirt-hosted-engine-setup-2.3.11-1.el7.noarch
> ovirt-ansible-hosted-engine-setup-1.0.26-1.el7.noarch
> python2-ovirt-host-deploy-1.8.0-1.el7.noarch
> ovirt-ansible-engine-setup-1.1.9-1.el7.noarch
> python2-ovirt-setup-lib-1.2.0-1.el7.noarch
> cockpit-machines-ovirt-195.1-1.el7.noarch
> ovirt-hosted-engine-ha-2.3.3-1.el7.noarch
> ovirt-vmconsole-1.0.7-2.el7.noarch
> cockpit-ovirt-dashboard-0.13.5-1.el7.noarch
> ovirt-provider-ovn-driver-1.2.22-1.el7.noarch
> ovirt-host-deploy-common-1.8.0-1.el7.noarch
> ovirt-host-4.3.4-1.el7.x86_64
> python-ovirt-engine-sdk4-4.3.2-2.el7.x86_64
> ovirt-host-dependencies-4.3.4-1.el7.x86_64
> ovirt-ansible-repositories-1.1.5-1.el7.noarch
> [root@swm-02 ~]# cat /etc/redhat-release
> CentOS Linux release 7.6.1810 (Core)
> [root@swm-02 ~]# uname -r
> 3.10.0-957.27.2.el7.x86_64
> You have new mail in /var/spool/mail/root
> [root@swm-02 ~]# ip a
> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
> group default qlen 1000
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> inet 127.0.0.1/8 scope host lo
> valid_lft forever preferred_lft forever
> 2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
> test state UP group default qlen 1000
> link/ether d4:ae:52:8d:50:48 brd ff:ff:ff:ff:ff:ff
> 3: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
> link/ether d4:ae:52:8d:50:49 brd ff:ff:ff:ff:ff:ff
> 4: p1p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
> ovirtmgmt state UP group default qlen 1000
> link/ether 90:e2:ba:1e:14:80 brd ff:ff:ff:ff:ff:ff
> 5: p1p2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
> link/ether 90:e2:ba:1e:14:81 brd ff:ff:ff:ff:ff:ff
> 6: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
> group default qlen 1000
> link/ether a2:b8:d6:e8:b3:d8 brd ff:ff:ff:ff:ff:ff
> 7: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
> default qlen 1000
> link/ether 96:a0:c1:4a:45:4b brd ff:ff:ff:ff:ff:ff
> 25: test: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
> state UP group default qlen 1000
> link/ether d4:ae:52:8d:50:48 brd ff:ff:ff:ff:ff:ff
> inet 10.15.11.21/24 brd 10.15.11.255 scope global test
> valid_lft forever preferred_lft forever
> 26: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
> noqueue state UP group default qlen 1000
> link/ether 90:e2:ba:1e:14:80 brd ff:ff:ff:ff:ff:ff
> inet 10.15.28.31/24 brd 10.15.28.255 scope global ovirtmgmt
> valid_lft forever preferred_lft forever
> 27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
> group default qlen 1000
> link/ether 62:e5:e5:07:99:eb brd ff:ff:ff:ff:ff:ff
> 29: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
> ovirtmgmt state UNKNOWN group default qlen 1000
> link/ether fe:6f:9c:95:00:02 brd ff:ff:ff:ff:ff:ff
> [root@swm-02 ~]# free -m
> total used free shared buff/cache
available
> Mem: 64413 1873 61804 9 735
62062
> Swap: 16383 0 16383
> [root@swm-02 ~]# free -h
> total used free shared buff/cache
available
> Mem: 62G 1.8G 60G 9.5M 735M
60G
> Swap: 15G 0B 15G
> [root@swm-02 ~]# ls
> ls lsb_release lshw lslocks
> lsmod lspci lssubsys
> lsusb.py
> lsattr lscgroup lsinitrd lslogins
> lsns lss16toppm lstopo-no-graphics
> lsblk lscpu lsipc lsmem
> lsof lsscsi lsusb
> [root@swm-02 ~]# lscpu
> Architecture: x86_64
> CPU op-mode(s): 32-bit, 64-bit
> Byte Order: Little Endian
> CPU(s): 16
> On-line CPU(s) list: 0-15
> Thread(s) per core: 2
> Core(s) per socket: 4
> Socket(s): 2
> NUMA node(s): 2
> Vendor ID: GenuineIntel
> CPU family: 6
> Model: 44
> Model name: Intel(R) Xeon(R) CPU X5672 @ 3.20GHz
> Stepping: 2
> CPU MHz: 3192.064
> BogoMIPS: 6384.12
> Virtualization: VT-x
> L1d cache: 32K
> L1i cache: 32K
> L2 cache: 256K
> L3 cache: 12288K
> NUMA node0 CPU(s): 0,2,4,6,8,10,12,14
> NUMA node1 CPU(s): 1,3,5,7,9,11,13,15
> Flags: fpu vme de pse tsc msr pae mce cx8 apic sep
> mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht
> tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
> rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq
> dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca
> sse4_1 sse4_2 popcnt aes lahf_lm ssbd ibrs ibpb stibp tpr_shadow vnmi
> flexpriority ept vpid dtherm ida arat spec_ctrl intel_stibp flush_l1d
> [root@swm-02 ~]#
> _______________________________________________
> Users mailing list -- users(a)ovirt.org
> To unsubscribe send an email to users-leave(a)ovirt.org
> Privacy Statement: https://www.ovirt.org/site/privacy-policy/
> oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/MTMZ5MF4CF2...