3:58 a.m.
Hi,
Maybe you can send just the relevant part of the vdsm logs that contain the attempt to
launch the vm itself - it should start with vmCreate. Try to find "::call vmCreate
with (..." and either find the matching "return vmCreate with"
or an maybe there is an ERROR or Traceback in the vdsm log following the vmCreate call.
Gadi Ickowicz
----- Original Message -----
From: "Nauman Abbas" <nauman.abbas(a)seecs.edu.pk>
To: "Meital Bourvine" <mbourvin(a)redhat.com>
Cc: "users(a)ovirt.org" <Users(a)ovirt.org>
Sent: Tuesday, December 31, 2013 11:47:12 AM
Subject: Re: [Users] VM not starting up
Vdsm is running fine. Also checked the clocks. You were right, the Engine clock was 5
hours ahead of Node clock. I've corrected that but still the same issue.
On Tue, Dec 31, 2013 at 12:44 PM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Are you sure that vdsm is running?
The error happened at 2013-12-31 11:32:56,999 (engine.log)
but the last line in vdsm.log is from 2013-12-31 07:20:50,807
Also make sure that your clocked are synced.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 9:39:09 AM
Subject: Re: [Users] VM not starting up
Sending files one by one. Vdsm.log
On Tue, Dec 31, 2013 at 11:48 AM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Engine log can be found on the engine (while vdsm.log is on the host).
The full path is - /var/log/ovirt-engine/engine.log
audit.log - /var/log/audit/audit.log
About the vdsm log - I don't see any error there, I think that you cut too much from
it.
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: "Meital Bourvine" < mbourvin(a)redhat.com >
Cc: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 8:42:43 AM
Subject: Re: [Users] VM not starting up
Hello Meital
SELinux is off. The cluster doesn't work if SELinux is on, my hosts and storage is
showing up as okay but VM is not starting up.
I've managed to get vdsm.log but cannot find engine.log and audit.log. Sorry for being
a noob, if you can tell me the path to these files I'll send them right away.
On Tue, Dec 31, 2013 at 11:17 AM, Meital Bourvine < mbourvin(a)redhat.com > wrote:
Hi Nauman,
Maybe it's a selinux issue?
Please try running `setenforce 0` before starting the vm.
Also please attach engine.log, vdsm.log, and audit.log
From: "Nauman Abbas" < nauman.abbas(a)seecs.edu.pk >
To: " users(a)ovirt.org " < Users(a)ovirt.org >
Sent: Tuesday, December 31, 2013 7:13:01 AM
Subject: [Users] VM not starting up
Hello all,
First of all thank you for your help, I've finally managed to get my Cluster
configured properly but now that I create VMs I'm facing another problem. Whenever I
start my VM I get this error.
" VM TestVm is down. Exit message: Child quit during startup handshake: Input/output
error."
I've googled around but haven't found any satisfactory solution. If anyone can
help out it would be great.
Regards
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
--
Nauman Abbas
Assistant System Administrator (LMS),
Room No. A-207, SEECS,
National University of Sciences & Technology,
+ 92 321 5359946
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users