Re: [ovirt-users] Ovirt Node NG 4.0.0 wants to bridge my infiniband link

Hello, What's "couple of vdsm hooks"? Could you provide the source code of those? Regards, Yevgeny On Mon, Jul 4, 2016 at 1:43 PM, Giorgio Biacchi <giorgio(a)di.unimi.it&gt; wrote: > Hi list, > I'm trying a test installation of the new Ovirt Node Image and engine > before > upgrading my 3.6 installation. > > In my current environment every hypervisor access the NFS shared data > domain via > infiniband. With a couple of vdsm hooks I was able to set the infiniband > link in > connected mode and set a MTU of 65520. In my case the infiniband link is > used as > a common NIC, I don't use RDMA, only IP over infiniband to access the > data domain. > > Now, when I attempt to setup host networking, the system try to bridge the > connection "ibstorage" (defined in networks tab) with ib0 device. But a > non > ethernet device cannot be bridged that way and host networking setup > fails. > > Any idea or suggestion? With 3.6 (node and engine) all was fine. > > Thanks > -- > gb > > PGP Key: http://pgp.mit.edu/ > Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34 > _______________________________________________ > Users mailing list > Users(a)ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users