3:46 p.m.
----- Original Message -----
From: "Renchu Mathew" <renchu(a)cracknell.com>
To: "Eli Mesika" <emesika(a)redhat.com>
Cc: "Martin Perina" <mperina(a)redhat.com>, users(a)ovirt.org
Sent: Sunday, January 25, 2015 11:19:21 AM
Subject: RE: [ovirt-users] Power Management config on Ovirt
Hi Eli,
Please use any details.
Thanks for your support.
Regards
Renchu Mathew
Hi again
Looking in the logs I see that this is a issue we handled when we switched from XML RPC to
JSON RPC protocol.
Which vdsm is installed in the proxy host ?
I am adding Piotr who is on charge of the JSON RPC protocol and who helped me in the past
when I got a similar error on PM operations
-----Original Message-----
From: Eli Mesika [mailto:emesika@redhat.com]
Sent: Sunday, January 25, 2015 12:58 PM
To: Renchu Mathew
Cc: Martin Perina; users(a)ovirt.org
Subject: Re: [ovirt-users] Power Management config on Ovirt
Hi Renchu
I am looking currently on he case and will respond later on today after
investigating the logs.
If I will not find anything, can I use the details for the host PM only for
status command to try to debug and find the source of the problem ?
Thanks
Eli
----- Original Message -----
> From: "Renchu Mathew" <renchu(a)cracknell.com>
> To: "Martin Perina" <mperina(a)redhat.com>
> Cc: users(a)ovirt.org, "Eli Mesika" <emesika(a)redhat.com>
> Sent: Sunday, January 25, 2015 6:50:00 AM
> Subject: RE: [ovirt-users] Power Management config on Ovirt
>
> Hi Martin,
>
> I got the below output when I run the command and it works from both
> the nodes.
>
> fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P
>
> Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I
> lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis
power
> status'...
> Chassis power = On
> Done
>
> Thanks
>
> Renchu Mathew | Sr. IT Administrator
>
>
>
> CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T
> +971 4
> 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI |
> LONDON | MUSCAT | DOHA | JEDDAH EMAIL renchu(a)cracknell.com | WEB
> www.cracknell.com
>
> This email, its content and any files transmitted with it are intended
> solely for the addressee(s) and may be legally privileged and/or
> confidential. If you are not the intended recipient please let us know
> by email reply and delete it from the system. Please note that any
> views or opinions presented in this email do not necessarily represent
> those of the company. Email transmissions cannot be guaranteed to be
> secure or error-free as information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or contain viruses. The
> company therefore does not accept liability for any errors or
> omissions in the contents of this message which arise as a result of email
> transmission.
>
>
> -----Original Message-----
> From: Martin Perina [mailto:mperina@redhat.com]
> Sent: Thursday, January 22, 2015 6:12 PM
> To: Renchu Mathew
> Cc: users(a)ovirt.org; Eli Mesika
> Subject: Re: [ovirt-users] Power Management config on Ovirt
>
>
>
> ----- Original Message -----
> > From: "Renchu Mathew" <renchu(a)cracknell.com>
> > To: "Martin Perina" <mperina(a)redhat.com>
> > Cc: users(a)ovirt.org
> > Sent: Thursday, January 22, 2015 2:39:43 PM
> > Subject: RE: [ovirt-users] Power Management config on Ovirt
> >
> > Hi Martin,
> >
> >
> >
> > Yes. The vdsm host.log is from node-02.
>
> That's strange, I cannot find any call to fenceNode which should
> appear, if PM status is gathered.
>
> Eli, any idea?
>
> > I have checked the link and it says
> > we need to install the sever view management agent & net-snmp on the
> > hosts.
> > Do we need to try this? How to install this on node? I used the
> > below irmc admin user.
>
> Not, AFAIK this is needed only from Clustersuite, but not for oVirt.
>
> But could you please execute this command on node-20 just to confirm
> that Fujitsu Primergy is communicating through IPMI:
>
> fence_ipmilan -a IP -l USER -p PASS -o status -v -P
>
> where IP is IPMI address (from the log it should be 192.168.1.114)
> USER and PASS please set according to you setup.
>
> Thanks
>
> Martin
>
> >
> >
> >
> > [cid:image001.png@01D03669.DD48B4E0]
> >
> >
> >
> > Regards
> >
> >
> >
> > Renchu Mathew | Sr. IT Administrator
> >
> >
> >
> >
> >
> >
> >
> > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971
> > 4
> > 3445417 | F +971 4 3493675 | M +971 50 7386484
> >
> > ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH
> >
> > EMAIL renchu(a)cracknell.com | WEB www.cracknell.com
> >
> >
> >
> > This email, its content and any files transmitted with it are
> > intended solely for the addressee(s) and may be legally privileged
> > and/or confidential. If you are not the intended recipient please
> > let us know by email reply and delete it from the system. Please
> > note that any views or opinions presented in this email do not
> > necessarily represent those of the company. Email transmissions
> > cannot be guaranteed to be secure or error-free as information could
> > be intercepted, corrupted, lost, destroyed, arrive late or
> > incomplete, or contain viruses. The company therefore does not
> > accept liability for any errors or omissions in the contents of this
> > message which arise as a result of email transmission.
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: Martin Perina [mailto:mperina@redhat.com]
> > Sent: Thursday, January 22, 2015 4:49 PM
> > To: Renchu Mathew
> > Cc: users(a)ovirt.org
> > Subject: Re: [ovirt-users] Power Management config on Ovirt
> >
> >
> >
> > Hi,
> >
> >
> >
> > according to [1] Fujitsu iRMC should be accessible using IPMI.
> >
> > Now, I looked at logs, but I cannot see any fenceNode exection in
> > vdsm.log.
> > According to engine.log, host Node-02.cracknell.com was used as
> > fence proxy.
> > Are you sure that vdsm.log is from this host?
> >
> >
> >
> > Thanks
> >
> >
> >
> > Martin
> >
> >
> >
> > [1]
> > https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.
> > ht
> > ml
> >
> >
> >
> >
> >
> > ----- Original Message -----
> >
> > > From: "Renchu Mathew" <renchu(a)cracknell.com>
> >
> > > To: "Martin Perina" <mperina(a)redhat.com>
> >
> > > Cc: users(a)ovirt.org
> >
> > > Sent: Thursday, January 22, 2015 12:37:51 PM
> >
> > > Subject: RE: [ovirt-users] Power Management config on Ovirt
> >
> > >
> >
> > > Hi Martin,
> >
> > >
> >
> > > Please find attached log files from engine and proxy host. Not
> > > sure
> >
> > > whether IPMI or which one can be used. It is Fujitsu iRMC port. I
> > > also
> >
> > > tried the rsb but same error.
> >
> > >
> >
> > > Can we configure Power management using Fujitsu iRMC?
> >
> > >
> >
> > > Thanks & Regards
> >
> > >
> >
> > > Renchu Mathew
> >
> > >
> >
> > > -----Original Message-----
> >
> > > From: Martin Perina [mailto:mperina@redhat.com]
> >
> > > Sent: Thursday, January 22, 2015 1:58 PM
> >
> > > To: Renchu Mathew
> >
> > > Cc: users(a)ovirt.org
> >
> > > Subject: Re: [ovirt-users] Power Management config on Ovirt
> >
> > >
> >
> > > Hi,
> >
> > >
> >
> > > first of all are you sure that Fujitsu PRIMERGY is accessible
> > > using
> >
> > > IPMI protocol? If so, could you provide engine.log and also
> > > vdsm.log
> >
> > > from host that was used as fencing proxy? You can find out which
> > > host
> >
> > > is used as a proxy either in Events tab after you execute the test
> > > or in engine.log.
> >
> > >
> >
> > > Thanks
> >
> > >
> >
> > > Martin Perina
> >
> > >
> >
> > > ----- Original Message -----
> >
> > > > From: "Renchu Mathew" <renchu(a)cracknell.com>
> >
> > > > To: users(a)ovirt.org
> >
> > > > Sent: Thursday, January 22, 2015 7:41:43 AM
> >
> > > > Subject: [ovirt-users] Power Management config on Ovirt
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > Dear all,
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > I am trying to configure power management on ovirt v3.5
> >
> > > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two
> > > > Fujitsu
> >
> > > > PRIMERGY
> >
> > > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power
> >
> > > > management configuration. The test gives a message “Test failed,
> >
> > > > argument of type ‘NoneType’ is not iterable” as below . Also
> > > > tried
> >
> > > > rsb type as per redhat document.
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do
> > > > we
> >
> > > > need to specify anything in Options?
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > Please help me.
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > Best Regards
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > Renchu Mathew
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > >
> >
> > > > _______________________________________________
> >
> > > > Users mailing list
> >
> > > > Users@ovirt.org<mailto:Users@ovirt.org>
> >
> > > > http://lists.ovirt.org/mailman/listinfo/users
> >
> > > >
> >
> > >
> >
>