Re: [Users] Problem Creating "oVirt Engine"

On 08/01/2013 01:43 AM, Richie@HIP wrote: > BTW - I installed oVirtEngine at a client's office using a VirtualBox > VM. They are a large imaging center and have an Active Directory and > DNS in place. I Stumbled upon ALL the same problems when using the > default engine setup parameters (it hung upon restarting the HTTPd service). > > Just to add to your knowledge, I began doing the oVirtEngine > implementation using Parallels Desktop as well as VirtualBox in MY > MacBookPro; both experience the same problems. can you please open a bug on installer to clearly state this name will not work, etc? > > Richie > * > José E ("Richie") Piovanetti, MD, MS* > M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com > <mailto:richiepiovanetti@healthcareinfopartners.com> > > > > > > > On Jul 31, 2013, at 6:29 PM, "Richie@HIP" > <richiepiovanetti(a)healthcareinfopartners.com > <mailto:richiepiovanetti@healthcareinfopartners.com>> wrote: > >> Arr.… >> >> On June 4 2013 I sent the following message trying to overcome the >> FQDN issue: >> >>> hi oVirt Community. >>> >>> This will be my first posting for help to the oVirt community, so >>> please bear with me I'f I'm not to the etiquette standards you might >>> have already. >>> >>> I'm trying to test oVirt as a FOSS Virtualization solution for small- >>> to medium-sized healthcare organizations implementing various health >>> information technology solutions (HIT) that the new health care >>> reform is requiring. As a Clinical informatist, I'm very concerned >>> about health care costs, hence I'm pushing for open source to take a >>> wider stance in U.S. health care to reduce costs where possible and >>> divert moneys to patient care. Now enough with my altruistic >>> desires, and let go into the deep. >>> >>> I'm trying to create "virtual machines" (using VirtualBox, Parallels >>> and/or VMWare Workstation); mainly one for "oVirt Engine"; ind later >>> a the second one for "oVirt Nodes". This way, these VM's files can >>> be copier to any hardware and underlying OS, so at least the "Virt >>> Engine" is easily installed and brought-up to facilitate managing >>> oVirt Nodes. I considered creating ".iso" images of each component >>> (Engine and Nodes) but I'm afraid this will hit the wall for linux >>> novices when installing the ".iso" images in different hardware >>> platforms (with different processors, number of cores, RAM, chipsets, >>> etc.) >>> >>> I've begun with creating a VM for oVirt Engine under Parallels >>> (albeit I began with VirtualBox, but drivers "client additions" >>> aren't compatible with Fedora 18 - so I'll migrate this Parallels VM >>> to VB once it is operational) Fedora 18 installed without a single >>> problem. I then installed all "oVirt Engine" requirements by >>> performing the instructions published in >>> http://www.ovirt.org/Download - that is: >>> >>> First: >>> sudo yum localinstall >>> http://ovirt.org/releases/ovirt-release-fedora.noarch.rpm >>> >>> Second: >>> sudo yum install -y ovirt-engine >>> >>> Third: …I get stuck…!!! >>> >>> When I am performing the third step, I hit the fan. Each time I >>> perform the third step shown in the aforementioned web page >>> (i.e. sudo engine-setup), the "Welcome to oVirt Engine setup utility" >>> appears and begins to run until I reach the point where I need to >>> define a "Fully Qualified Domain Name." >>> >>> NOTE - A video of how to install oVirt in a single machine, entitled >>> "Installing oVirt on a single machine" (at: >>> http://www.ovirt.org/Documentation) shows the process (with some >>> exemptions because it was recorded while oVirt v3.x was in beta), but >>> I don't get what the video shows…!!! >>> >>> This is what I do and before getting stuck in the "FQDN thing" (no >>> pun intended…!!!). As third-step, I enter: >>> >>> sudo engine-setup >>> >>> I follow the prompts that appear after the "Welcome to oVirt Engine >>> setup utility" is shown in the terminal window until I get to the prompt: >>> >>> Host fully qualified domain name. Note: this name should be fully >>> resolvable [localhost.localdomain] : >>> >>> If I press "Enter", I get…: >>> >>> The IP (127.0.0.1) which was resolved from the FQDN >>> localhost.localdomain is not configured on any non loopback interface >>> on this host >>> >>> I figured that in order to define a FQDNm I had to expose my "oVirt >>> Engine" VN to the Internet. Since I'm doing all from home (where I'm >>> limited to a "Dynamic IP", albeit, which hardly-ever changes) I went >>> to DynDns.org <http://DynDns.org> and created an entry so my "FQDN >>> Text-URL" would resolve to the IP where I'm at. I also modified my >>> Domain's DNS and entered a "DNS Alias" named "dcmanagement", defining >>> this "DNS alias" to resolve into my IP by going to DynDNS.org >>> <http://DynDNS.org> to get my "Public IP". Hence, the alias >>> "dcmanagement1" resolves by going to >>> "healthcareinfopartners.dyndns.org >>> <http://healthcareinfopartners.dyndns.org>" and gets my Public IP. >>> >>> NOTE - To test this setup, I do "ping" to either >>> "healthcareinfopartners.dyndns.org >>> <http://healthcareinfopartners.dyndns.org>" or >>> "dcmanagement1.healthcareinfopartners.dyndns.org >>> <http://dcmanagement1.healthcareinfopartners.dyndns.org>" and I get >>> my Dynamic Public IP back. Once the "Text URL" issue was returning >>> my IP (as FQDN expect) I repeated the: >>> >>> sudo engine-setup >>> >>> Upon reaching: >>> >>> Host fully qualified domain name. Note: this name should be fully >>> resolvable [localhost.localdomain] : >>> >>> I entered "dcmanagement1.healthcareinfopartners.com >>> <http://dcmanagement1.healthcareinfopartners.com>" and got my Public >>> IP back with the following message: >>> >>> The IP (70.45.xxx.xx) which was resolved from the FQDN >>> dcmanagement1.healthcareinfopartners.com >>> <http://dcmanagement1.healthcareinfopartners.com> is not configured >>> on any non loopback interface on this host >>> >>> >>> Now, here's the question. What does anyone suggest I do to overcome >>> the FQDN setting and continue the installation process…? >>> >>> >>> José E ("Richie") Piovanetti, MD, MS >>> M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com >>> <mailto:richiepiovanetti@healthcareinfopartners.com> >>> >> >> Looking at your evaluation of my ERROR_LOG, and HOSTNAME (your first >> and second comments) you reassured my suspicion; to go to "HOSTNAME" >> and change "localhost-localdomain" to "localhost.localdomain". >> >> >> When I go to your "third" comment is where all hell breaks loose. You >> say "/to make ovirt-engine work, you must have resolvable host via dns >> and resolved to non loopback address, so localhost will not work for >> you/". That line appears to take me back to where I started a month >> and half ago (see copy of my original pos for help); "localhost" and >> "localdomain" seem to be biting me in the ass. >> >> I was told that by adding an entry to the HOST file i'd overcome the >> need for a DNS. Not exactly the same as what you suggest and/or mean…? >> >> Since I'm doing this work at home I have a Dynamic IP. I opened an >> account on DynDNS.or so I could resolve DNSs to my "Dynamic IP"; which >> changes every time the power goes out and back (i.e. about once a >> month in Puerto Rico where I'm at, and were used to that as trees and >> tropical foliage can't be prevented from causing blackouts by tripping >> on power lines). >> >> If I PING (from the "Terminal") healthcareinfopartners.dyndns.org >> <http://healthcareinfopartners.dyndns.org/> I get my "Public IP at The >> Time" (i.e. my "Assigned Dynamic IP"). >> >> In my Godaddy.com <http://godaddy.com/> DNS setting I have a CName >> entry for: >> >> * Host: dcmanagement1 >> * Points To: healthcareinfopartners.dyndns.org >> <http://healthcareinfopartners.dyndns.org/> >> >> >> <Screen Shot 2013-07-31 at 6.19.54 PM.png> >> >> What should I use as FQDN then (which is resolved by GoDaddy's DNS): >> >> * healthcareinfopartners.dyndns.org >> <http://healthcareinfopartners.dyndns.org/> >> * dcmanagement1.healthcareinfopartners.dyndns.org >> <http://dcmanagement1.healthcareinfopartners.dyndns.org/> >> * something else…? >> >> >> The problem I see with this is that the "oVirtEngine" VM will not have >> a valid Internet IP since it sits behind a router that is doing NAT. >> I could set a rule (ex. por forwarding, port triggering or a static >> route) in my router that states that if port X is being accessed from >> "the outside" (i.e. Internet) to route to my "oVirtEngine VM IP"; >> which is getting it's own IP from the router's DHCP. >> >> What do you think now that you have a little more information about my >> setup…? >> >> >> *José E ("Richie") Piovanetti, MD, MS* >> M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com >> <mailto:richiepiovanetti@healthcareinfopartners.com> >> >> >> >> >> >> >> On Jul 31, 2013, at 3:32 PM, Alon Bar-Lev <alonbl(a)redhat.com >> <mailto:alonbl@redhat.com>> wrote: >> >>> >>> >>> ----- Original Message ----- >>>> From: "Richie@HIP" <richiepiovanetti(a)healthcareinfopartners.com >>>> <mailto:richiepiovanetti@healthcareinfopartners.com>> >>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com <mailto:alonbl@redhat.com>> >>>> Cc: "Itamar Heim" <iheim(a)redhat.com <mailto:iheim@redhat.com>>, >>>> users(a)ovirt.org <mailto:users@ovirt.org> >>>> Sent: Wednesday, July 31, 2013 9:00:11 PM >>>> Subject: Re: [Users] Problem Creating "oVirt Engine" >>>> >>>> I'm having difficulties copying files between the virtual machine >>>> and the >>>> host (Mac OS X) so here are the contents of the LOG files you >>>> requested, and >>>> them some others; just in case: >>>> >>>> ERROR_LOG >>>> [Wed Jul 24 15:43:22.461132 2013] [core:notice] [pid 1573] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Wed Jul 24 15:43:22.466439 2013] [suexec:notice] [pid 1573] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Wed Jul 24 15:43:22.470121 2013] [unique_id:alert] [pid 1573] (EAI >>>> 3)Temporary failure in name resolution: AH01564: unable to find IPv4 >>>> address >>>> of "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Thu Jul 25 18:14:34.690954 2013] [core:notice] [pid 1767] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Thu Jul 25 18:14:34.740559 2013] [suexec:notice] [pid 1767] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Thu Jul 25 18:14:34.754827 2013] [unique_id:alert] [pid 1767] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Thu Jul 25 18:41:37.883704 2013] [core:notice] [pid 1669] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Thu Jul 25 18:41:38.007318 2013] [suexec:notice] [pid 1669] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Thu Jul 25 18:41:38.235952 2013] [unique_id:alert] [pid 1669] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Thu Jul 25 22:32:24.662852 2013] [core:notice] [pid 1776] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Thu Jul 25 22:32:24.667030 2013] [suexec:notice] [pid 1776] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Thu Jul 25 22:32:24.752059 2013] [unique_id:alert] [pid 1776] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Thu Jul 25 22:43:58.686998 2013] [core:notice] [pid 9998] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Thu Jul 25 22:43:58.688804 2013] [suexec:notice] [pid 9998] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Thu Jul 25 22:43:58.713941 2013] [unique_id:alert] [pid 9998] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Wed Jul 31 11:44:35.413032 2013] [core:notice] [pid 1608] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Wed Jul 31 11:44:35.594199 2013] [suexec:notice] [pid 1608] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Wed Jul 31 11:44:35.655151 2013] [unique_id:alert] [pid 1608] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>> >>> You must fix this... host should be valid name... or at least >>> localhost.localdomain >>> >>>> >>>> >>>> ERROR_LOG-20130722 >>>> [Wed Jun 05 21:34:14.169441 2013] [core:notice] [pid 9738] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Wed Jun 05 21:34:14.226321 2013] [suexec:notice] [pid 9738] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Wed Jun 05 21:34:14.266895 2013] [unique_id:alert] [pid 9738] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Wed Jun 05 21:46:05.696805 2013] [core:notice] [pid 10003] SELinux >>>> policy >>>> enabled; httpd running as context >>>> unconfined_u:system_r:unconfined_t:s0-s0:c0.c1023 >>>> [Wed Jun 05 21:46:05.703114 2013] [suexec:notice] [pid 10003] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Wed Jun 05 21:46:05.766539 2013] [unique_id:alert] [pid 10003] (EAI >>>> 2)Name >>>> or service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Wed Jun 05 22:41:22.385838 2013] [core:notice] [pid 1228] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Wed Jun 05 22:41:22.961322 2013] [suexec:notice] [pid 1228] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Wed Jun 05 22:41:23.009235 2013] [unique_id:alert] [pid 1228] (EAI >>>> 2)Name or >>>> service not known: AH01564: unable to find IPv4 address of >>>> "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Fri Jul 19 17:51:20.671533 2013] [core:notice] [pid 1133] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Fri Jul 19 17:51:21.151132 2013] [suexec:notice] [pid 1133] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Fri Jul 19 17:51:21.155341 2013] [unique_id:alert] [pid 1133] (EAI >>>> 3)Temporary failure in name resolution: AH01564: unable to find IPv4 >>>> address >>>> of "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> [Mon Jul 22 10:53:42.080793 2013] [core:notice] [pid 1293] SELinux >>>> policy >>>> enabled; httpd running as context system_u:system_r:httpd_t:s0 >>>> [Mon Jul 22 10:53:42.143691 2013] [suexec:notice] [pid 1293] >>>> AH01232: suEXEC >>>> mechanism enabled (wrapper: /usr/sbin/suexec) >>>> [Mon Jul 22 10:53:42.487376 2013] [unique_id:alert] [pid 1293] (EAI >>>> 3)Temporary failure in name resolution: AH01564: unable to find IPv4 >>>> address >>>> of "localhost-localdomain" >>>> AH00016: Configuration Failed >>>> >>>> >>>> ACCESS_LOG >>>> <empty> >>>> >>>> >>>> SSL_ACCESS_LOG >>>> <empty> >>>> >>>> >>>> SSL_ERROR_LOG >>>> <empty> >>>> >>>> >>>> SSL_REQUESTS_LOG >>>> <empty> >>>> >>>> >>>> HOSTS >>>> # This is a sample HOSTS file prepared by Richie Piovanetti to install >>>> oVirt's "oVirtEngine" >>>> # This file contains the mappings of IP addresses to host names. >>>> # Each entry should be kept on an individual line. >>>> # The IP address should be placed in the first column followed by the >>>> corresponding host name. >>>> # The IP address and the host name should be separated by at least >>>> one space. >>>> # Additionally, comments (such as these) may be inserted on >>>> individual lines >>>> # or following the machine name denoted by a '#' symbol. >>>> # For example: >>>> # 102.54.94.97 rhino.acme.com <http://rhino.acme.com/> # source server >>>> # 38.25.63.10 x.acme.com <http://x.acme.com/> # x client host >>>> >>>> 127.0.0.1localhost.localdomain localhost >>>> ::1localhost6.localdomain6 localhost6 >>>> 10.211.55.7ovirt.localdomain.local localhost >>>> # The line above begins with the IP of the local machine (host) where >>>> oVirtEngine resides >>>> >>>> >>>> HOSTNAME >>>> localhost-localdomain >>> >>> Should be localhost or localhost.localdomain, but not the above. >>> Also, to make ovirt-engine work, you must have resolvable host via >>> dns and resolved to non loopback address, so localhost will not work >>> for you. >>> >>>> >>>> >>>> José E ("Richie") Piovanetti, MD, MS >>>> M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com >>>> <mailto:richiepiovanetti@healthcareinfopartners.com> >>>> >>>> >>>> >>>> >>>> >>>> >>>> On Jul 30, 2013, at 12:42 PM, Alon Bar-Lev <alonbl(a)redhat.com >>>> <mailto:alonbl@redhat.com>> wrote: >>>> >>>>> >>>>> >>>>> ----- Original Message ----- >>>>>> From: "Richie@HIP" <richiepiovanetti(a)healthcareinfopartners.com >>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com>> >>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com <mailto:alonbl@redhat.com>> >>>>>> Cc: "Itamar Heim" <iheim(a)redhat.com <mailto:iheim@redhat.com>>, >>>>>> users(a)ovirt.org <mailto:users@ovirt.org> >>>>>> Sent: Tuesday, July 30, 2013 6:42:51 PM >>>>>> Subject: Re: [Users] Problem Creating "oVirt Engine" >>>>>> >>>>>> Let me star by Saying, I;m using Fedora 18 Desktop; whack I've removed >>>>>> most >>>>>> of the unnecessary stuff (games, libreOffice, mail server, and other >>>>>> "utilities") to strip it down. Then I run YUM to "-update" >>>>>> whatever is >>>>>> left >>>>>> in Fedora 18 Desktop. >>>>>> >>>>>> When setting up the oVirt Engine, if I accept the recommendations, the >>>>>> "engine-setup" process hangs "try to restart the HTTPd"; gives and >>>>>> [ERROR} >>>>>> and aborts the rest of the process. I've included terminal dumps >>>>>> and logs >>>>>> (i.e. "as attachments") in prior email everyone you to see…!!! If >>>>>> I DO >>>>>> NOT >>>>>> accept the recommendations related to the HTTPd, then the setup >>>>>> process >>>>>> RUNS >>>>>> AS EXPECTED and gives me port 8700 for the main page, and 8701 for all >>>>>> oVirtEngine "portals". I've looked at the engine-etup log and if >>>>>> aborts >>>>>> when the python script is trying to restart HHTPd. Look at the >>>>>> following: >>>>>> 2013_07_25_10_55_PM_TerminalOutput - Terminal output dump IF I >>>>>> ACCEPT the >>>>>> defaults >>>>>> engine-setup_2013_07_25_22_35_14 - engine-setup "log" IF I ACCEPT the >>>>>> defaults >>>>> >>>>> I would like to know why httpd is not started at your machine. >>>>> Can you please send /var/log/httpd/error_log, >>>>> /var/log/httpd/ssl_error_log >>>>> >>>>> >>>>>> 2013_07_25_11_30_PM_TerminalOutput - Terminal output dump if I DO NOT >>>>>> accept >>>>>> the defaults >>>>>> engine-setup_2013_07_25_23_27_15 - engine-setup "log" if I DO NOT >>>>>> accept >>>>>> the >>>>>> defaults >>>>>> >>>>>> I've never reached a point where I've been asked to "accept of >>>>>> reject a >>>>>> "Certificate"; I've just been able to open the "oVirt Engine Welcome >>>>>> Screen" >>>>>> (through port 8700 - ex. at http://ovirt.localhost.local:8700 >>>>>> <http://ovirt.localhost.local:8700/>") >>>>>> >>>>>> I've had my concerns as to the following: >>>>>> What about removing all HTTP (apache, tomcat, etc.) fro fedora, hence >>>>>> stripping fedora even more, prior to running "engine-setup". >>>>>> There must be an error trapping failure to restart HTTPd in >>>>>> "engine-setup" >>>>>> that needs to be attended. >>>>>> … >>>>>> >>>>>> Please see attachments >>>>>> >>>>>> Best >>>>>> >>>>>> José E ("Richie") Piovanetti, MD, MS >>>>>> M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com >>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Jul 29, 2013, at 7:29 AM, Alon Bar-Lev <alonbl(a)redhat.com >>>>>> <mailto:alonbl@redhat.com>> wrote: >>>>>> >>>>>>> >>>>>>> >>>>>>> ----- Original Message ----- >>>>>>>> From: "Richie@HIP" <richiepiovanetti(a)healthcareinfopartners.com >>>>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com>> >>>>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com <mailto:alonbl@redhat.com>> >>>>>>>> Cc: "Itamar Heim" <iheim(a)redhat.com <mailto:iheim@redhat.com>>, >>>>>>>> users(a)ovirt.org <mailto:users@ovirt.org> >>>>>>>> Sent: Friday, July 26, 2013 6:45:28 AM >>>>>>>> Subject: Re: [Users] Problem Creating "oVirt Engine" >>>>>>>> >>>>>>>> Herein the terminal output after removing oVirtEngine and >>>>>>>> reinstalling; >>>>>>>> BU >>>>>>>> this time NOT overriding the https configuration. >>>>>>> >>>>>>> Why not follow the recommendation? >>>>>>> >>>>>>>> Again, I was able to open the oVirt Engine "Welcome to Open >>>>>>>> Virtualization >>>>>>>> Manager" screen in Firefox using "ovirt.localdomain.local:8700" >>>>>>>> as URL, >>>>>>>> but >>>>>>>> can't enter any of the portals (requiring access to port 8701) >>>>>>> >>>>>>> What do you get? what error in browser? you should accept the >>>>>>> certificate >>>>>>> before you are permitted by the browser to access this site. >>>>>>> >>>>>>>> >>>>>>>> José E ("Richie") Piovanetti, MD, MS >>>>>>>> M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com >>>>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Jul 25, 2013, at 11:22 PM, "Richie@HIP" >>>>>>>> <richiepiovanetti(a)healthcareinfopartners.com >>>>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com>> wrote: >>>>>>>> >>>>>>>>> Did what you said; removed existing installation and reinstalled >>>>>>>>> oVirtEngine. Below is the output in the terminal: >>>>>>>>> >>>>>>>>> I DID NOT change the defaults of the installation defaults >>>>>>>>> related to >>>>>>>>> "overriding current https configuration", and as weeks before, the >>>>>>>>> installation hangs with an error when restarting the "httpd >>>>>>>>> service". >>>>>>>>> I >>>>>>>>> include the terminal output and engine-setup log file for you >>>>>>>>> to see. >>>>>>>>> >>>>>>>>> I'll redo the removal and installation, this time process but >>>>>>>>> next time >>>>>>>>> "NOT overriding https configuration". Wait for a follow up >>>>>>>>> email with >>>>>>>>> these results. >>>>>>>>> >>>>>>>>> <engine-setup_2013_07_25_22_35_14.log><2013_07_25_10_55_PM_TerminalOutput.txt> >>>>>>>>> >>>>>>>>> >>>>>>>>> José E ("Richie") Piovanetti, MD, MS >>>>>>>>> M: 787-615-4884 | richiepiovanetti(a)healthcareinfopartners.com >>>>>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Jul 24, 2013, at 4:18 PM, Alon Bar-Lev <alonbl(a)redhat.com >>>>>>>>> <mailto:alonbl@redhat.com>> wrote: >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ----- Original Message ----- >>>>>>>>>>> From: "Richie@HIP" >>>>>>>>>>> <richiepiovanetti(a)healthcareinfopartners.com >>>>>>>>>>> <mailto:richiepiovanetti@healthcareinfopartners.com>> >>>>>>>>>>> To: "Alon Bar-Lev" <alonbl(a)redhat.com <mailto:alonbl@redhat.com>> >>>>>>>>>>> Cc: "Itamar Heim" <iheim(a)redhat.com >>>>>>>>>>> <mailto:iheim@redhat.com>>, users(a)ovirt.org >>>>>>>>>>> <mailto:users@ovirt.org> >>>>>>>>>>> Sent: Wednesday, July 24, 2013 11:00:04 PM >>>>>>>>>>> Subject: Re: [Users] Problem Creating "oVirt Engine" >>>>>>>>>>> >>>>>>>>>>> Herein a collection of some of the logs in the path specified. >>>>>>>>>>> Regarding >>>>>>>>>>> the >>>>>>>>>>> "engine.log" I'm including the one with the oldest date in the >>>>>>>>>>> filename. >>>>>>>>>> >>>>>>>>>> Can you please remove installation using: >>>>>>>>>> # engine-cleanup >>>>>>>>>> >>>>>>>>>> Then reinstall: >>>>>>>>>> # engine-setup >>>>>>>>>> >>>>>>>>>> Please select integration with apache, and configure SSL. >>>>>>>>>> >>>>>>>>>> After doing so, try to login using http://localhost/webadmin, >>>>>>>>>> if not >>>>>>>>>> working please send the engine.log. >>>>>>>>>> >>>>>>>>>> Thanks! >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>>> >>>> >> >