Re: [ovirt-users] oVirt Hosted Engine Setup fails

Hello there, Sorry for the delay to answer the mail, but, I have been busy doing things... The permission on /dev/random are the following: [root@host1 manuel]# ls -la /dev/random crw-rw-rw-. 1 root root 1, 8 may 4 18:06 /dev/random Suppose that these permission should look something like: [root@host1 manuel]# ls -la /dev/random crw-rw-rw-. 1 vdsm kvm 1, 8 may 4 18:06 /dev/random Finally I do not know what you meant with permission on SELinux audit logs?¿? Sorry for my lack of understanding, so, please let me know much more precisely and I will look for it

Thanks for all in advance I will be waiting for you Manuel Luis Aznar 2017-05-03 15:09 GMT+01:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: > > > On Wed, May 3, 2017 at 11:30 AM, Manuel Luis Aznar < > manuel.luis.aznar(a)gmail.com&gt; wrote: > >> Hello Simone and all others, >> >> I have attached to the mail the requested files. If you have any other >> inquiry just say it, The failed installation drive would be keep safe until >> solving this problem. >> >> Thanks for all in advance >> Manuel >> > > The issue is here: > May 1 11:47:45 host1 journal: libvirt version: 2.0.0, package: > 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>;, > 2017-03-03-02:09:45, c1bm.rdu2.centos.org) > May 1 11:47:45 host1 journal: hostname: host1.bajada.es > May 1 11:47:45 host1 journal: Falló al conectar con el socket de > monitor: No existe el proceso > May 1 11:47:45 host1 journal: internal error: process exited while > connecting to monitor: /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 > -msg timestamp=on#012Could not access KVM kernel module: Permission > denied#012failed to initialize KVM: Permission denied > May 1 11:47:45 host1 journal: libvirt version: 2.0.0, package: > 10.el7_3.5 (CentOS BuildSystem <http://bugs.centos.org>;, > 2017-03-03-02:09:45, c1bm.rdu2.centos.org) > May 1 11:47:45 host1 journal: hostname: host1.bajada.es > May 1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de > entrada/salida > May 1 11:47:45 host1 journal: Fin de archivo al leer datos: Error de > entrada/salida > > could you please also check the permission on /dev/random and SELinux > audit logs? > > > >> >> 2017-05-02 10:55 GMT+01:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: >> >>> Sure, but first we need to understand what it's happening: in our CI >>> process everything is fine so I think it's something specific to your env. >>> Could you please share your: >>> /var/log/libvirt/qemu/HostedEngine.log >>> /var/log/messages >>> >>> thanks, >>> Simone >>> >>> >>> On Tue, May 2, 2017 at 11:38 AM, Manuel Luis Aznar < >>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>> >>>> Ok thankyou. >>>> >>>> Suppose that this problem probably would be solve in a future release. >>>> >>>> Thanks, >>>> Manuel >>>> >>>> 2017-05-02 10:35 GMT+01:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: >>>> >>>>> >>>>> >>>>> On Tue, May 2, 2017 at 11:30 AM, Manuel Luis Aznar < >>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>> >>>>>> Hello there again, >>>>>> >>>>>> Yes as I say, I have done several clean installations and the VM >>>>>> engine sometimes starts without any problem. So Simone any recommendation >>>>>> to make the engine VM starts properly?¿ >>>>>> >>>>>> While is installing the HA agent and HA broker are down, would I get >>>>>> good result by starting the services myself?¿ >>>>>> >>>>>> Any help from Simone or somebody would be appreciated >>>>>> Thanks for all in advance >>>>>> Manuel Luis Aznar >>>>>> >>>>> >>>>> I suggest to check libvirt logs. >>>>> >>>>> >>>>>> >>>>>> 2017-05-02 7:54 GMT+01:00 Simone Tiraboschi <stirabos(a)redhat.com&gt;: >>>>>> >>>>>>> >>>>>>> >>>>>>> On Mon, May 1, 2017 at 3:14 PM, Manuel Luis Aznar < >>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>> >>>>>>>> Hello there, >>>>>>>> >>>>>>>> I have been looking in the internet using google why my >>>>>>>> installation of ovirt-hosted-engine is failing. >>>>>>>> >>>>>>>> I have found this link: >>>>>>>> >>>>>>>> https://www.mail-archive.com/users@ovirt.org/msg40864.html >>>>>>>> (Hosted engine install failed; vdsm upset about broker) >>>>>>>> >>>>>>>> It seems to be the same error... >>>>>>>> >>>>>>>> So to knarra and Jamie Lawrence my question is: >>>>>>>> >>>>>>>> Did you manage to discover the problem?? In my instalation I >>>>>>>> am using nfs and not gluster... >>>>>>>> >>>>>>>> I have read the error and is the same error >>>>>>>> "BrokerConnectionError: ...". The ovirt-ha-agent and ovirt-ha-broker did >>>>>>>> not start when the installation is creating the engine VM... >>>>>>>> >>>>>>> >>>>>>> This is just a false positive: the HA agent and the HA broker are >>>>>>> still down so vdsm is complaining but at that point it's absolutely fine by >>>>>>> itself since the engine VM still doesn't exists. >>>>>>> We already have an open bug to reduce the impact of that message. >>>>>>> >>>>>>> The real issue is that for some reason the engine VM could not >>>>>>> start on your system. >>>>>>> >>>>>>> >>>>>>>> >>>>>>>> As I have said before any help would be very appreciated...no >>>>>>>> matter whom will give it >>>>>>>> Thanks for all in advance >>>>>>>> Manuel Luis Aznar >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2017-05-01 12:21 GMT+01:00 Manuel Luis Aznar < >>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>> >>>>>>>>> Hello Simone and all the comunity, >>>>>>>>> >>>>>>>>> I have been doing the instalation of ovirt hosted engine again >>>>>>>>> and it fails, libvirtd and vdsmd services are failing. They are failing >>>>>>>>> with the following errors: >>>>>>>>> >>>>>>>>> >>>>>>>>> libvirt daemon >>>>>>>>> >>>>>>>>> libvirtd.service - Virtualization daemon >>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>> ââunlimited-core.conf >>>>>>>>> Active: active (running) since lun 2017-05-01 11:43:49 WEST; >>>>>>>>> 14min ago >>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>> http://libvirt.org >>>>>>>>> Main PID: 21993 (libvirtd) >>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>> ââ21993 /usr/sbin/libvirtd --listen >>>>>>>>> >>>>>>>>> may 01 11:43:49 host1.bajada.es systemd[1]: Starting >>>>>>>>> Virtualization daemon... >>>>>>>>> may 01 11:43:49 host1.bajada.es systemd[1]: Started >>>>>>>>> Virtualization daemon. >>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: libvirt >>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem < >>>>>>>>> http://bugs.centos.org>;, 2017-03-03-02:09:45, >>>>>>>>> c1bm.rdu2.centos.org) >>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: hostname: >>>>>>>>> host1.bajada.es >>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: Falló al >>>>>>>>> conectar con el socket de monitor: No existe el proceso >>>>>>>>> may 01 11:47:45 host1.bajada.es libvirtd[21993]: internal error: >>>>>>>>> process exited while connecting to monitor: /dev/random -device >>>>>>>>> virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 -msg >>>>>>>>> timestamp=on >>>>>>>>> Could not access >>>>>>>>> KVM kernel module: Permission denied >>>>>>>>> failed to >>>>>>>>> initialize KVM: Permission denied >>>>>>>>> >>>>>>>>> vdsm daemon >>>>>>>>> >>>>>>>>> vdsmd.service - Virtual Desktop Server Manager >>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; >>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>> Active: active (running) since lun 2017-05-01 11:43:51 WEST; >>>>>>>>> 15min ago >>>>>>>>> Main PID: 22119 (vdsm) >>>>>>>>> CGroup: /system.slice/vdsmd.service >>>>>>>>> ââ22119 /usr/bin/python2 /usr/share/vdsm/vdsm >>>>>>>>> ââ22612 /usr/libexec/ioprocess --read-pipe-fd 68 >>>>>>>>> --write-pipe-fd 67 --max-threads 10 --max-queued-requests 10 >>>>>>>>> ââ22630 /usr/libexec/ioprocess --read-pipe-fd 76 >>>>>>>>> --write-pipe-fd 75 --max-threads 10 --max-queued-requests 10 >>>>>>>>> ââ22887 /usr/libexec/ioprocess --read-pipe-fd 44 >>>>>>>>> --write-pipe-fd 43 --max-threads 10 --max-queued-requests 10 >>>>>>>>> ââ22893 /usr/libexec/ioprocess --read-pipe-fd 52 >>>>>>>>> --write-pipe-fd 50 --max-threads 10 --max-queued-requests 10 >>>>>>>>> >>>>>>>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm >>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to >>>>>>>>> connect to broker, the number of errors has exceeded the limit (1) >>>>>>>>> may 01 11:58:37 host1.bajada.es vdsm[22119]: vdsm root ERROR >>>>>>>>> failed to retrieve Hosted Engine HA info >>>>>>>>> Traceback (most >>>>>>>>> recent call last): >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/vdsm/host/api.py", line 231, >>>>>>>>> in _getHaInfo >>>>>>>>> stats = >>>>>>>>> instance.get_all_stats() >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/client/client.py", >>>>>>>>> line 102, in get_all_stats >>>>>>>>> with >>>>>>>>> broker.connection(self._retries, self._wait): >>>>>>>>> File >>>>>>>>> "/usr/lib64/python2.7/contextlib.py", line 17, in __enter__ >>>>>>>>> return >>>>>>>>> self.gen.next() >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", >>>>>>>>> line 99, in connection >>>>>>>>> >>>>>>>>> self.connect(retries, wait) >>>>>>>>> File >>>>>>>>> "/usr/lib/python2.7/site-packages/ovirt_hosted_engine_ha/lib/brokerlink.py", >>>>>>>>> line 78, in connect >>>>>>>>> raise >>>>>>>>> BrokerConnectionError(error_msg) >>>>>>>>> >>>>>>>>> BrokerConnectionError: Failed to connect to broker, the number of errors >>>>>>>>> has exceeded the limit (1) >>>>>>>>> may 01 11:58:52 host1.bajada.es vdsm[22119]: vdsm >>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR Failed to >>>>>>>>> connect to broker, the number of errors has exceeded the limit (1) >>>>>>>>> >>>>>>>>> I have been looking to the ovirt mailing list (and also internet >>>>>>>>> looking up in google) but I dont get what is the problem. >>>>>>>>> >>>>>>>>> I have attached to the mail the vdsm, ovirt-hosted-engine-setup >>>>>>>>> and the answer of the installation. In the vdsm.log I got the following >>>>>>>>> error: >>>>>>>>> >>>>>>>>> libvirtError: internal error: process exited while connecting to >>>>>>>>> monitor: /dev/random -device virtio-rng-pci,rng=objrng0,id=rng0,bus=pci.0,addr=0x7 >>>>>>>>> -msg timestamp=on >>>>>>>>> Could not access KVM kernel module: Permission denied >>>>>>>>> failed to initialize KVM: Permission denied >>>>>>>>> >>>>>>>>> I have been looking for that error but I dont get anything clear, >>>>>>>>> so I will greatly appreciate the help of somebody... >>>>>>>>> >>>>>>>>> The KVM modules are loaded because if I fired up this "lsmod | >>>>>>>>> grep kvm" I get the following: >>>>>>>>> >>>>>>>>> kvm_intel 170181 0 >>>>>>>>> kvm 554609 1 kvm_intel >>>>>>>>> irqbypass 13503 1 kvm >>>>>>>>> >>>>>>>>> Also the group owner of /dev/kvm is: >>>>>>>>> >>>>>>>>> crw-rw-rw-+ 1 root kvm 10, 232 may 1 01:26 /dev/kvm >>>>>>>>> >>>>>>>>> Hope somebody could help >>>>>>>>> Thanks for all in advance >>>>>>>>> Manuel Luis Aznar >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> 2017-03-15 11:58 GMT+00:00 Manuel Luis Aznar < >>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>> >>>>>>>>>> Hello there again, >>>>>>>>>> >>>>>>>>>> Yes that is correct. I interrupted the setup with Ctrl+C. That >>>>>>>>>> was because while I was answering, at the same time, I was looking at this >>>>>>>>>> file, and I saw this: >>>>>>>>>> >>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>>>>>>>>> vdsm.conf with ssl=True requires the following changes: >>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>>>>>>>>> qemu.conf: spice_tls=1. >>>>>>>>>> >>>>>>>>>> So I decided to interrupt the installation, because of the >>>>>>>>>> error, edit the files (vdsm.conf and qemu.conf) and then I executed the >>>>>>>>>> installation again and it was successful. It seams that the change of the >>>>>>>>>> values in that files, in my case, produced a successful instalation. >>>>>>>>>> >>>>>>>>>> Sorry if my english is hard to understand, now you understand >>>>>>>>>> what I did. >>>>>>>>>> >>>>>>>>>> Any question, remark just go ahead >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> Manuel >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2017-03-15 11:22 GMT+00:00 Simone Tiraboschi < >>>>>>>>>> stirabos(a)redhat.com&gt;: >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Mar 15, 2017 at 12:17 PM, Manuel Luis Aznar < >>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>>>>>> >>>>>>>>>>>> Hello Simone, >>>>>>>>>>>> >>>>>>>>>>>> The quoted lines on your last message are on lines 1238-1245 >>>>>>>>>>>> on the attached log ovirt-hosted-engine-setup file. >>>>>>>>>>>> >>>>>>>>>>>> That file is the first hosted-engine setup. But this log file >>>>>>>>>>>> is not the result of a host-engine-setup file. I start with the >>>>>>>>>>>> installation and while I was answering the question I was looking to this >>>>>>>>>>>> log file for errors and when I found this errors I stopped and done this: >>>>>>>>>>>> >>>>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>>>>>>>>>>> vdsm.conf with ssl=True requires the following changes: >>>>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>>>>>>>>>>> qemu.conf: spice_tls=1. >>>>>>>>>>>> >>>>>>>>>>>> Previously to this installation I have done several >>>>>>>>>>>> installations without revising this log file and always getting failed >>>>>>>>>>>> installations. >>>>>>>>>>>> >>>>>>>>>>>> Please its important to note that: >>>>>>>>>>>> >>>>>>>>>>>> The currently setup which we are talking about was using >>>>>>>>>>>> repo "ovirt-release41-pre.rpm". After correcting that two >>>>>>>>>>>> files I do the installation and in the end it was completed successfully. >>>>>>>>>>>> >>>>>>>>>>>> When I have some time I will try to install again using the >>>>>>>>>>>> realease repo "ovirt-release41.rpm" >>>>>>>>>>>> >>>>>>>>>>>> If you have any explanation, question or remark, please go >>>>>>>>>>>> ahead... >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> From the attached logs it seams that you voluntary interrupted >>>>>>>>>>> the setup from keyboard here: >>>>>>>>>>> 2017-03-07 11:23:17 DEBUG otopi.plugins.otopi.dialog.human >>>>>>>>>>> dialog.__logString:204 DIALOG:SEND iptables was detected on >>>>>>>>>>> your computer, do you wish setup to configure it? (Yes, No)[Yes]: >>>>>>>>>>> 2017-03-07 12:06:15 DEBUG otopi.context >>>>>>>>>>> context._executeMethod:142 method exception >>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>> File "/usr/lib/python2.7/site-packages/otopi/context.py", >>>>>>>>>>> line 132, in _executeMethod >>>>>>>>>>> method['method']() >>>>>>>>>>> File "/usr/share/ovirt-hosted-engin >>>>>>>>>>> e-setup/scripts/../plugins/gr-he-setup/network/firewall_manager.py", >>>>>>>>>>> line 157, in _customization >>>>>>>>>>> default=_('Yes'), >>>>>>>>>>> File "/usr/share/otopi/plugins/otopi/dialog/human.py", line >>>>>>>>>>> 177, in queryString >>>>>>>>>>> value = self._readline(hidden=hidden) >>>>>>>>>>> File "/usr/lib/python2.7/site-packages/otopi/dialog.py", >>>>>>>>>>> line 246, in _readline >>>>>>>>>>> value = self.__input.readline() >>>>>>>>>>> File "/usr/lib/python2.7/site-packages/otopi/main.py", line >>>>>>>>>>> 53, in _signal >>>>>>>>>>> raise RuntimeError("SIG%s" % signum) >>>>>>>>>>> RuntimeError: SIG2 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> I will report back. >>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>> Manuel >>>>>>>>>>>> >>>>>>>>>>>> 2017-03-13 17:29 GMT+00:00 Simone Tiraboschi < >>>>>>>>>>>> stirabos(a)redhat.com&gt;: >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Mar 13, 2017 at 4:08 PM, Manuel Luis Aznar < >>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hello to all there again, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I was having some troubles while installing ovirt Hosted >>>>>>>>>>>>>> Engine, I took some look at the hosted engine setup logs while I was >>>>>>>>>>>>>> running the hosted-engine --deploy and I found the following in the ovirt >>>>>>>>>>>>>> hosted engine setup logs: >>>>>>>>>>>>>> >>>>>>>>>>>>>> lvm requires configuration >>>>>>>>>>>>>> libvirt is not configured for vdsm yet >>>>>>>>>>>>>> FAILED: conflicting vdsm and libvirt-qemu tls configuration. >>>>>>>>>>>>>> vdsm.conf with ssl=True requires the following changes: >>>>>>>>>>>>>> libvirtd.conf: listen_tcp=0, auth_tcp="sasl", listen_tls=1 >>>>>>>>>>>>>> qemu.conf: spice_tls=1. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> hosted-engine setup is already running vdsm-tool configure >>>>>>>>>>>>> --force so it should configure libvirt and qemu for you, not sure why it >>>>>>>>>>>>> failed. >>>>>>>>>>>>> Could you please attach the logs from the failed >>>>>>>>>>>>> hosted-engine-setup run? >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> When I saw this I stopped the setup and edited this two >>>>>>>>>>>>>> files (vdsm.conf and qemu.conf) set the stated configurations and run the >>>>>>>>>>>>>> deploy again. All was fine and I dont have any trouble the installation >>>>>>>>>>>>>> finished successfully. This was using ovirt-release41-pre.rpm repo. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I will be trying the same installation with >>>>>>>>>>>>>> ovirt-release41.rpm (when I have time) and I will report what happened. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks for all >>>>>>>>>>>>>> Manuel Luis Aznar >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> 2017-03-06 1:31 GMT+00:00 Manuel Luis Aznar < >>>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hey there, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I have been loking around, of course as of now the >>>>>>>>>>>>>>> following I am going to say I suppose is not anything new to you: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> This is the status of libvirtd: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> â libvirtd.service - Virtualization daemon >>>>>>>>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>>>>>>>> ââunlimited-core.conf >>>>>>>>>>>>>>> Active: active (running) since lun 2017-03-06 01:25:05 >>>>>>>>>>>>>>> WET; 1min 37s ago >>>>>>>>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>>>>>>>> http://libvirt.org >>>>>>>>>>>>>>> Main PID: 24350 (libvirtd) >>>>>>>>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>>>>>>>> ââ24350 /usr/sbin/libvirtd --listen >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting >>>>>>>>>>>>>>> Virtualization daemon... >>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started >>>>>>>>>>>>>>> Virtualization daemon. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> After looking at the state I fire up the VM engine with the >>>>>>>>>>>>>>> command "hosted-engine --vm-start" and I got the following: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> VM exists and is down, destroying it >>>>>>>>>>>>>>> Machine destroyed >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ed786811-0321-431e-be4b-2d03764c1b02 >>>>>>>>>>>>>>> Status = WaitForLaunch >>>>>>>>>>>>>>> nicModel = rtl8139,pv >>>>>>>>>>>>>>> statusTime = 4374100040 <(437)%20410-0040> >>>>>>>>>>>>>>> emulatedMachine = pc >>>>>>>>>>>>>>> pid = 0 >>>>>>>>>>>>>>> vmName = HostedEngine >>>>>>>>>>>>>>> devices = [{'index': '2', 'iface': 'ide', >>>>>>>>>>>>>>> 'specParams': {}, 'readonly': 'true', 'deviceId': >>>>>>>>>>>>>>> '506df4eb-e783-4451-a8a6-993fa4dbb381', 'address': {'bus': >>>>>>>>>>>>>>> '1', 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '0'}, >>>>>>>>>>>>>>> 'device': 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, >>>>>>>>>>>>>>> {'index': '0', 'iface': 'virtio', 'format': 'raw', 'bootOrder': '1', >>>>>>>>>>>>>>> 'poolID': '00000000-0000-0000-0000-000000000000', >>>>>>>>>>>>>>> 'volumeID': '2bc39472-1a4b-4c7d-8ef9-1212182ad802', >>>>>>>>>>>>>>> 'imageID': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', >>>>>>>>>>>>>>> 'specParams': {}, 'readonly': 'false', 'domainID': >>>>>>>>>>>>>>> 'f44afe8d-56f9-4e1e-beee-4daa548dbad8', 'optional': >>>>>>>>>>>>>>> 'false', 'deviceId': '08288fcf-6b12-4bd1-84d3-259992e7aa6d', >>>>>>>>>>>>>>> 'address': {'slot': '0x06', 'bus': '0x00', 'domain': '0x0000', 'type': >>>>>>>>>>>>>>> 'pci', 'function': '0x0'}, 'device': 'disk', 'shared': 'exclusive', >>>>>>>>>>>>>>> 'propagateErrors': 'off', 'type': 'disk'}, {'device': 'scsi', 'model': >>>>>>>>>>>>>>> 'virtio-scsi', 'type': 'controller'}, {'nicModel': 'pv', 'macAddr': >>>>>>>>>>>>>>> '00:16:3e:65:a6:4e', 'linkActive': 'true', 'network': 'ovirtmgmt', >>>>>>>>>>>>>>> 'specParams': {}, 'deviceId': '84b82c6c-bcca-4983-82d5-8d1e3ab3811a', >>>>>>>>>>>>>>> 'address': {'slot': '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': >>>>>>>>>>>>>>> 'pci', 'function': '0x0'}, 'device': 'bridge', 'type': 'interface'}, >>>>>>>>>>>>>>> {'device': 'console', 'specParams': {}, 'type': 'console', 'deviceId': >>>>>>>>>>>>>>> '6236af73-8dab-4d14-b950-fb4ad01d4420', 'alias': >>>>>>>>>>>>>>> 'console0'}, {'device': 'vga', 'alias': 'video0', 'type': 'video'}, >>>>>>>>>>>>>>> {'device': 'virtio', 'specParams': {'source': 'random'}, 'model': 'virtio', >>>>>>>>>>>>>>> 'type': 'rng'}] >>>>>>>>>>>>>>> guestDiskMapping = {} >>>>>>>>>>>>>>> vmType = kvm >>>>>>>>>>>>>>> clientIp = >>>>>>>>>>>>>>> displaySecurePort = -1 >>>>>>>>>>>>>>> memSize = 4096 >>>>>>>>>>>>>>> displayPort = -1 >>>>>>>>>>>>>>> cpuType = Broadwell >>>>>>>>>>>>>>> spiceSecureChannels = smain,sdisplay,sinputs,scursor >>>>>>>>>>>>>>> ,splayback,srecord,ssmartcard,susbredir >>>>>>>>>>>>>>> smp = 2 >>>>>>>>>>>>>>> displayIp = 0 >>>>>>>>>>>>>>> display = vnc >>>>>>>>>>>>>>> maxVCpus = 6 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> After that if I look again at the status of libvirtd I >>>>>>>>>>>>>>> obtain: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> â libvirtd.service - Virtualization daemon >>>>>>>>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>>>>>>>> ââunlimited-core.conf >>>>>>>>>>>>>>> Active: active (running) since lun 2017-03-06 01:25:05 >>>>>>>>>>>>>>> WET; 5min ago >>>>>>>>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>>>>>>>> http://libvirt.org >>>>>>>>>>>>>>> Main PID: 24350 (libvirtd) >>>>>>>>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>>>>>>>> ââ24350 /usr/sbin/libvirtd --listen >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Starting >>>>>>>>>>>>>>> Virtualization daemon... >>>>>>>>>>>>>>> mar 06 01:25:05 host1.bajada.es systemd[1]: Started >>>>>>>>>>>>>>> Virtualization daemon. >>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: libvirt >>>>>>>>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem < >>>>>>>>>>>>>>> http://bugs.centos.org>;, 2017-03-03-02:09:45, >>>>>>>>>>>>>>> c1bm.rdu2.centos.org) >>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: hostname: >>>>>>>>>>>>>>> host1.bajada.es >>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: Falló al >>>>>>>>>>>>>>> conectar con el socket de monitor: No existe el proceso >>>>>>>>>>>>>>> mar 06 01:29:39 host1.bajada.es libvirtd[24350]: internal >>>>>>>>>>>>>>> error: process exited while connecting to monitor: Could not access KVM >>>>>>>>>>>>>>> kernel module: Permission denied >>>>>>>>>>>>>>> failed to >>>>>>>>>>>>>>> initialize KVM: Permission denied >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> So the libvirtd is the problem, as i said this is nothing >>>>>>>>>>>>>>> new to you of course... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks again for any help >>>>>>>>>>>>>>> Manuel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> 2017-03-05 18:51 GMT+00:00 Manuel Luis Aznar < >>>>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hey there again, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Can you check if you have KVM modules loaded? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> In order to check that I fire up the following >>>>>>>>>>>>>>>> command: "lsmod | grep kvm" >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Result was: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> kvm_intel 170181 0 >>>>>>>>>>>>>>>> kvm 554609 1 kvm_intel >>>>>>>>>>>>>>>> irqbypass 13503 1 kvm >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Also check group owner for "/dev/kvm". I fire this: "ls >>>>>>>>>>>>>>>> -la /dev/kvm". The result was: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> crw-rw-rw-+ 1 root kvm 10, 232 mar 5 03:35 /dev/kvm >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Also I check if there were some remain packages pending to >>>>>>>>>>>>>>>> install for kvm and qemu and I got: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> yum install \*kvm\* >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The result is, that the system need to install the >>>>>>>>>>>>>>>> following: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Instalando: >>>>>>>>>>>>>>>> centos-release-qemu-ev noarch >>>>>>>>>>>>>>>> 1.0-1.el7 extras >>>>>>>>>>>>>>>> 11 k >>>>>>>>>>>>>>>> qemu-guest-agent x86_64 >>>>>>>>>>>>>>>> 10:2.5.0-3.el7 base >>>>>>>>>>>>>>>> 133 k >>>>>>>>>>>>>>>> qemu-kvm-ev-debuginfo x86_64 >>>>>>>>>>>>>>>> 10:2.6.0-28.el7_3.3.1 ovirt-4.0 12 M >>>>>>>>>>>>>>>> vdsm-hook-faqemu noarch >>>>>>>>>>>>>>>> 4.18.21-1.el7.centos ovirt-4.0 >>>>>>>>>>>>>>>> 15 k >>>>>>>>>>>>>>>> vdsm-hook-qemucmdline noarch >>>>>>>>>>>>>>>> 4.18.21-1.el7.centos ovirt-4.0 >>>>>>>>>>>>>>>> 11 k >>>>>>>>>>>>>>>> Instalando para las dependencias: >>>>>>>>>>>>>>>> centos-release-virt-common noarch >>>>>>>>>>>>>>>> 1-1.el7.centos extras >>>>>>>>>>>>>>>> 4.5 k >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Checking libvirtd service status I got: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> libvirtd.service - Virtualization daemon >>>>>>>>>>>>>>>> Loaded: loaded (/usr/lib/systemd/system/libvirtd.service; >>>>>>>>>>>>>>>> enabled; vendor preset: enabled) >>>>>>>>>>>>>>>> Drop-In: /etc/systemd/system/libvirtd.service.d >>>>>>>>>>>>>>>> ââunlimited-core.conf >>>>>>>>>>>>>>>> Active: active (running) since dom 2017-03-05 15:56:11 >>>>>>>>>>>>>>>> WET; 2h 51min ago >>>>>>>>>>>>>>>> Docs: man:libvirtd(8) >>>>>>>>>>>>>>>> http://libvirt.org >>>>>>>>>>>>>>>> Main PID: 19415 (libvirtd) >>>>>>>>>>>>>>>> CGroup: /system.slice/libvirtd.service >>>>>>>>>>>>>>>> 19415 /usr/sbin/libvirtd --listen >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> mar 05 15:56:10 host1.bajada.es systemd[1]: Starting >>>>>>>>>>>>>>>> Virtualization daemon... >>>>>>>>>>>>>>>> mar 05 15:56:11 host1.bajada.es systemd[1]: Started >>>>>>>>>>>>>>>> Virtualization daemon. >>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: libvirt >>>>>>>>>>>>>>>> version: 2.0.0, package: 10.el7_3.5 (CentOS BuildSystem < >>>>>>>>>>>>>>>> http://bugs.centos.org>;, 2017-03-03-02:09:45, >>>>>>>>>>>>>>>> c1bm.rdu2.centos.org) >>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: >>>>>>>>>>>>>>>> hostname: host1.bajada.es >>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: Failed >>>>>>>>>>>>>>>> to connect to the socket monitor: process does not exits >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> (Fallo al conectar con el socket de monitor: No existe el >>>>>>>>>>>>>>>> proceso) >>>>>>>>>>>>>>>> mar 05 16:00:04 host1.bajada.es libvirtd[19415]: internal >>>>>>>>>>>>>>>> error: process exited while connecting to monitor: Could not access KVM >>>>>>>>>>>>>>>> kernel module: Permission denied >>>>>>>>>>>>>>>> failed to >>>>>>>>>>>>>>>> initialize KVM: Permission denied >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>>>>>> I will be waiting for you. Any help appreciated >>>>>>>>>>>>>>>> Manuel >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> 2017-03-05 17:33 GMT+00:00 Artyom Lukianov < >>>>>>>>>>>>>>>> alukiano(a)redhat.com&gt;: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I found this one under the vdsm log: >>>>>>>>>>>>>>>>> libvirtError: internal error: process exited while >>>>>>>>>>>>>>>>> connecting to monitor: Could not access KVM kernel module: Permission denied >>>>>>>>>>>>>>>>> failed to initialize KVM: Permission denied >>>>>>>>>>>>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::vm::1330::virt.vm::(setDownStatus) >>>>>>>>>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Changed >>>>>>>>>>>>>>>>> state to Down: internal error: process exited while connecting to monitor: >>>>>>>>>>>>>>>>> Could not access KVM kernel module: Permission denied >>>>>>>>>>>>>>>>> failed to initialize KVM: Permission denied (code=1) >>>>>>>>>>>>>>>>> Thread-70::INFO::2017-03-05 16:00:04,325::guestagent::430::virt.vm::(stop) >>>>>>>>>>>>>>>>> vmId=`ed786811-0321-431e-be4b-2d03764c1b02`::Stopping >>>>>>>>>>>>>>>>> connection >>>>>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05 >>>>>>>>>>>>>>>>> 16:00:04,325::vmchannels::238::vds::(unregister) Delete >>>>>>>>>>>>>>>>> fileno 52 from listener. >>>>>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05 >>>>>>>>>>>>>>>>> 16:00:04,325::vmchannels::66::vds::(_unregister_fd) >>>>>>>>>>>>>>>>> Failed to unregister FD from epoll (ENOENT): 52 >>>>>>>>>>>>>>>>> Thread-70::DEBUG::2017-03-05 >>>>>>>>>>>>>>>>> 16:00:04,326::__init__::209::jsonrpc.Notification::(emit) >>>>>>>>>>>>>>>>> Sending event {"params": {"ed786811-0321-431e-be4b-2d03764c1b02": >>>>>>>>>>>>>>>>> {"status": "Down", "exitReason": 1, "exitMessage": "internal error: process >>>>>>>>>>>>>>>>> exited while connecting to monitor: Could not access KVM kernel module: >>>>>>>>>>>>>>>>> Permission denied\nfailed to initialize KVM: Permission denied", >>>>>>>>>>>>>>>>> "exitCode": 1}, "notify_time": 4339924730}, "jsonrpc": "2.0", "method": >>>>>>>>>>>>>>>>> "|virt|VM_status|ed786811-0321-431e-be4b-2d03764c1b02"} >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Can you check if you have KVM modules loaded? Also, check >>>>>>>>>>>>>>>>> group owner for "/dev/kvm". >>>>>>>>>>>>>>>>> Best Regards >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Sat, Mar 4, 2017 at 4:24 PM, Manuel Luis Aznar < >>>>>>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt; wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hello there again, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> The error on the first email was using the repo >>>>>>>>>>>>>>>>>> ovirt-release41.rpm (http://resources.ovirt.org/pu >>>>>>>>>>>>>>>>>> b/yum-repo/ovirt-release41.rpm), so as I were getting >>>>>>>>>>>>>>>>>> the same error again and again I am currently trying with >>>>>>>>>>>>>>>>>> ovirt-release41-snapshot.rpm ( >>>>>>>>>>>>>>>>>> http://resources.ovirt.org/pu >>>>>>>>>>>>>>>>>> b/yum-repo/ovirt-release41-snapshot.rpm) and the result >>>>>>>>>>>>>>>>>> is nearly the same. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> After creating the VM on the installation I got the same >>>>>>>>>>>>>>>>>> error with the command "systemctl status vdsmd": >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> mar 04 14:10:19 host1.bajada.es vdsm[20443]: vdsm root >>>>>>>>>>>>>>>>>> ERROR failed to retrieve Hosted Engine HA info >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", >>>>>>>>>>>>>>>>>> line 231, in _getHaInfo >>>>>>>>>>>>>>>>>> stats = instance.get_all_stats() >>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line 102, >>>>>>>>>>>>>>>>>> in get_all_stats >>>>>>>>>>>>>>>>>> with broker.connection(self._retries, >>>>>>>>>>>>>>>>>> self._wait): >>>>>>>>>>>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", >>>>>>>>>>>>>>>>>> line 17, in __enter__ >>>>>>>>>>>>>>>>>> return self.gen.next() >>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 99, >>>>>>>>>>>>>>>>>> in connection >>>>>>>>>>>>>>>>>> self.connect(retries, wait) >>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line 78, >>>>>>>>>>>>>>>>>> in connect >>>>>>>>>>>>>>>>>> raise BrokerConnectionError(error_msg) >>>>>>>>>>>>>>>>>> BrokerConnectionError: Failed to connect to >>>>>>>>>>>>>>>>>> broker, the number of errors has exceeded the limit (1) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> mar 04 14:10:34 host1.bajada.es vdsm[20443]: vdsm >>>>>>>>>>>>>>>>>> ovirt_hosted_engine_ha.lib.brokerlink.BrokerLink ERROR >>>>>>>>>>>>>>>>>> Failed to connect to broker, the number of errors has exceeded the limit (1) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I have noticed that the ovirt-ha-agent and >>>>>>>>>>>>>>>>>> ovirt-ha-broker services was not running. I guess if this have something to >>>>>>>>>>>>>>>>>> do with the error in vsmd service log. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> But in this case the ovirt-hosted-engine-installation >>>>>>>>>>>>>>>>>> prints the vnc connection and I can connect to the engine VM. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>>>>>>>> Any help would be appreciated >>>>>>>>>>>>>>>>>> Manuel Luis Aznar >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> 2017-03-03 21:48 GMT+00:00 Manuel Luis Aznar < >>>>>>>>>>>>>>>>>> manuel.luis.aznar(a)gmail.com&gt;: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hello there, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I am having some trouble when deploying an oVirt 4.1 >>>>>>>>>>>>>>>>>>> hosted engine installation. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> When I m just to end the installation and the hosted >>>>>>>>>>>>>>>>>>> engine setup script is about to start the Vm engine (appliance) it fails >>>>>>>>>>>>>>>>>>> saying "The VM is not powring up". >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> If I double check the service vdsmd i get this error >>>>>>>>>>>>>>>>>>> all the time: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> vdsm root ERROR failed to retrieve Hosted Engine HA info >>>>>>>>>>>>>>>>>>> Traceback (most recent call last): >>>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packages/vdsm/host/api.py", >>>>>>>>>>>>>>>>>>> line 231, in _getHaInfo >>>>>>>>>>>>>>>>>>> stats = instance.get_all_stats() >>>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/client/client.py", line >>>>>>>>>>>>>>>>>>> 102, in get_all_stats >>>>>>>>>>>>>>>>>>> with broker.connection(self._retries, >>>>>>>>>>>>>>>>>>> self._wait): >>>>>>>>>>>>>>>>>>> File "/usr/lib64/python2.7/contextlib.py", line >>>>>>>>>>>>>>>>>>> 17, in __enter__ >>>>>>>>>>>>>>>>>>> return self.gen.next() >>>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line >>>>>>>>>>>>>>>>>>> 99, in connection >>>>>>>>>>>>>>>>>>> self.connect(retries, wait) >>>>>>>>>>>>>>>>>>> File "/usr/lib/python2.7/site-packa >>>>>>>>>>>>>>>>>>> ges/ovirt_hosted_engine_ha/lib/brokerlink.py", line >>>>>>>>>>>>>>>>>>> 78, in connect >>>>>>>>>>>>>>>>>>> raise BrokerConnectionError(error_msg) >>>>>>>>>>>>>>>>>>> BrokerConnectionError: Failed to connect to broker, the >>>>>>>>>>>>>>>>>>> number of errors has exceeded the limit (1) >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Did anyone have experimented the same problem?¿? Any >>>>>>>>>>>>>>>>>>> hint on How to solved it?¿? I have tried several times with clean >>>>>>>>>>>>>>>>>>> installations and always getting the same... >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> The host where I am trying to do the installation have >>>>>>>>>>>>>>>>>>> CentOS 7... >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks for all in advance >>>>>>>>>>>>>>>>>>> Will be waiting for any hint to see what I am doing >>>>>>>>>>>>>>>>>>> wrong... >>>>>>>>>>>>>>>>>>> Manuel Luis Aznar >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>> Users(a)ovirt.org >>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> > _______________________________________________ Users mailing list Users(a)ovirt.org http://lists.ovirt.org/mailman/listinfo/users