Re: [ovirt-users] oVirt Node 4.1.6 on IBM x3650 M3

On Tue, Oct 31, 2017 at 3:08 PM, Ryan Barry <rbarry(a)redhat.com&gt; wrote: Hello, i'm installing successfully on Lenovo Flex System x240 M5 Compute Node via PXE and boot through legacy mode. I did the required setup on Foreman by creating new Provisioning Templates (kickstart and PXELinux configs based on https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.1/... with few changes) I haven't been able to start the setup when UEFI mode is enabled, but is a problem connected first to grub2-uefi (discovery works only on Legacy mode, no deployment requires workaround: https://bugzilla.redhat.com/show_bug.cgi?id=1487107 ) and then maybe to pxe firmware that loops on downloading the same /grub/grub.cfg-01-MACADDRESS. But this shouldn't be related to oVirt images. Anyway setup done in legacy mode can't be booted via UEFI, because as far as i can see no /boot/efi partition is created by autopart. In case of start via cd iso image and using kickstart containing autopart --type=thinp, will autopart understand that efi partition is required and then setup everything needed? Luca -- "E' assurdo impiegare gli uomini di intelligenza eccellente per fare calcoli che potrebbero essere affidati a chiunque se si usassero delle macchine" Gottfried Wilhelm von Leibnitz, Filosofo e Matematico (1646-1716) "Internet è la più grande biblioteca del mondo. Ma il problema è che i libri sono tutti sparsi sul pavimento" John Allen Paulos, Matematico (1945-vivente) Luca 'remix_tj' Lorenzetto, http://www.remixtj.net , <lorenzetto.luca(a)gmail.com&gt;