6:55 a.m.
This is a multi-part message in MIME format.
--------------050607040809020004050901
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 7bit
Hi Gervais,
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host you are
installing on) and put them somewhere to look at? Also, I found that
starting VDSM from the command line is useful as it sometimes spits out
error messages that don't show up in the logs. I think the command I
used was:
su -s /bin/bash vdsm
python /usr/share/vdsm/vdsm
My problem was that I customized the logging settings in /etc/vdsm/*conf
to try and tone down the debugging stuff and had a syntax error.
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:
Hi Charles,
Thanks for the suggestion.
I cleaned up again using the bash script from the
recoving-from-failed-install link below, then reinstalled (yum install
ovirt-hosted-engine-setup).
I enabled NetworkManager and firewalld as you suggested. The install
stops very early on with an error:
[ ERROR ] Failed to execute stage 'Programs detection': hosted-engine
cannot be deployed while NetworkManager is running, please stop and
disable it before proceeding
I disabled and stopped NetworkManager and tried again. Same result. :(
Any more guesses?
Cheers,
Gervais
> On May 12, 2016, at 9:08 PM, Charles Tassell <ctassell(a)gmail.com
> <mailto:ctassell@gmail.com>> wrote:
>
> Hey Gervais,
>
> Try enabling NetworkManager and firewalld before doing the
> hosted-engine --deploy. I have run into problems with oVirt trying
> to perform tasks on hosts where firewalld is disabled, so maybe you
> are running into a similar problem. Also, I think the setup script
> will disable NetworkManager if it needs to. I know I didn't manually
> disable it on any of the boxes I installed on.
>
> On 16-05-12 04:49 PM, users-request(a)ovirt.org
> <mailto:users-request@ovirt.org> wrote:
>> Message: 1
>> Date: Thu, 12 May 2016 14:22:12 -0300
>> From: Gervais de Montbrun <gervais(a)demontbrun.com
>> <mailto:gervais@demontbrun.com>>
>> To: Wee Sritippho <wee.s(a)forest.go.th <mailto:wee.s@forest.go.th>>
>> Cc: users <users(a)ovirt.org <mailto:users@ovirt.org>>
>> Subject: Re: [ovirt-users] Adding another host to my cluster
>> Message-ID: <28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com
>> <mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA@demontbrun.com>>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Wee
>> (and others)
>>
>> Thanks for the reply. I tried what you suggested, but I am in the
>> exact same state. :-(
>>
>> I don't want to completely remove my hosted engine setup as it is
>> working on the two other hosts in my cluster. I did not run the rm
>> -rf stes listed here
>>
(https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...>)
>> that would wipe my hosted_engine nfs mount. If you know that this is
>> 100% necessary, please let me know.
>>
>> I did:
>> hosted-engine --clean-metadata --force-cleanup --host-id=3
>> run the bash script to remove all of the ovirt packages and config files
>> reinstalled ovirt-hosted-engine-setup
>> ran "hosted-engine --deploy"
>>
>> I'm back exactly where I started. Is there a way to run just the
>> network configuration part of the deploy?
>>
>> Since the last attempt, I did upgrade my hosted engine and my
>> cluster is now running oVirt 3.6.5.
>>
>> Cheers,
>> Gervais
>>
>>
>>
>>> On May 12, 2016, at 11:50 AM, Wee Sritippho <wee.s(a)forest.go.th
>>> <mailto:wee.s@forest.go.th>> wrote:
>>>
>>> Hi,
>>>
>>> I used to have a similar problem where one of my host can't be
>>> deployed due to the absence of ovirtmgmt bridge. Simone said it's a
>>> bug ( https://bugzilla.redhat.com/1323465
>>> <https://bugzilla.redhat.com/1323465> ) which would be fixed in 3.6.6.
>>>
>>> This is what I've done to solve it:
>>>
>>> 1. In the web UI, set the failed host to maintenance.
>>> 2. Remove it.
>>> 3. In that host, run a script from
>>>
https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>>
<https://www.ovirt.org/documentation/how-to/hosted-engine/#recoving-from-f...
>>> 4. Install ovirt-hosted-engine-setup again.
>>> 5. Redeploy again.
>>>
>>> Hope that helps
>>>
>>> On 11 ??????? 2016 22 ?????? 48 ???? 58 ?????? GMT+07:00, Gervais
>>> de Montbrun <gervais(a)demontbrun.com
>>> <mailto:gervais@demontbrun.com>> wrote:
>>> Hi Folks,
>>>
>>> I hate to reply to my own message, but I'm really hoping someone
>>> can help me with my issue
>>> http://lists.ovirt.org/pipermail/users/2016-May/039690.html
>>> <http://lists.ovirt.org/pipermail/users/2016-May/039690.html>
>>>
>>> Does anyone have a suggestion for me? If there is any more
>>> information that I can provide that would help you to help me,
>>> please advise.
>>>
>>> Cheers,
>>> Gervais
>>>
>>>
>>>
>>>> On May 9, 2016, at 1:42 PM, Gervais de Montbrun
>>>> <gervais(a)demontbrun.com <mailto:gervais@demontbrun.com>
>>>> <mailto:gervais@demontbrun.com
<mailto:gervais@demontbrun.com>>>
>>>> wrote:
>>>>
>>>> Hi All,
>>>>
>>>> I'm trying to add a third host into my oVirt cluster. I have
>>>> hosted engine setup on the first two. It's failing to finish the
>>>> hosted-engine --deploy on this third host. I wiped the server and
>>>> did a CentOS 7 minimum install and ran it again to have a clean
>>>> machine.
>>>>
>>>> My setup:
>>>> CentOS 7 clean install
>>>> yum install -y
>>>> http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
>>>> <http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm>
>>>> yum install -y ovirt-hosted-engine-setup
>>>> yum upgrade -y && reboot
>>>> systemctl disable NetworkManager ; systemctl stop NetworkManager ;
>>>> systemctl disable firewalld ; systemctl stop firewalld
>>>> hosted-engine --deploy
>>>>
>>>> hosted-engine --deploy always throws an error:
>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>> engine and bootstrap installation logs.
>>>> [ ERROR ] Unable to add Cultivar2 to the manager
>>>> and then echo's
>>>> [ INFO ] Waiting for VDSM hardware info
>>>> ...
>>>> [ ERROR ] Failed to execute stage 'Closing up': VDSM did not
start
>>>> within 120 seconds
>>>> [ INFO ] Stage: Clean up
>>>> [ INFO ] Generating answer file
>>>>
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'
>>>> [ INFO ] Stage: Pre-termination
>>>> [ INFO ] Stage: Termination
>>>> [ ERROR ] Hosted Engine deployment failed: this system is not
>>>> reliable, please check the issue, fix and redeploy
>>>> Log file is located at
>>>>
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
>>>>
>>>> Full output of hosted-engine --deploy included in the attached zip
>>>> file.
>>>> I've also included vdsm.log (There is more than one tries worth of
>>>> tries in there).
>>>> You'll also find the
>>>> ovirt-hosted-engine-setup-20160509130658-qb8ev0.log listed above.
>>>>
>>>> This is my "test" setup. Cultivar0 is my first host and my nfs
>>>> server for storage. I have two hosts in the setup already and
>>>> everything is working fine. The host does show up in the oVirt
>>>> admin, but shows "Installed Failed"
>>>> <PastedGraphic-1.png>
>>>>
>>>> Trying to reinstall from within the interface just fails again.
>>>>
>>>> The ovirt bridge interface is not configured and there are no
>>>> config files in /etc/sysconfi/network-scripts related to ovirt.
>>>>
>>>> OS:
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# cat /etc/redhat-release
>>>> CentOS Linux release 7.2.1511 (Core)
>>>>
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# uname -a
>>>> Linux cultivar2.grove.silverorange.com
>>>> <http://cultivar2.grove.silverorange.com>
>>>> <http://cultivar2.grove.silverorange.com/>
>>>> 3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38 UTC 2016
>>>> x86_64 x86_64 x86_64 GNU/Linux
>>>>
>>>> Versions:
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i ovirt
>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>> ovirt-release36-007-1.noarch
>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>> [root@cultivar2 ovirt-hosted-engine-setup]#
>>>> [root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa | grep -i virt
>>>> libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64
>>>> virt-viewer-2.0-6.el7.x86_64
>>>> libgovirt-0.3.3-1.el7_2.1.x86_64
>>>> libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch
>>>> fence-virt-0.3.2-2.el7.x86_64
>>>> virt-what-1.13-6.el7.x86_64
>>>> libvirt-python-1.2.17-2.el7.x86_64
>>>> libvirt-daemon-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-host-deploy-1.4.1-1.el7.centos.noarch
>>>> virt-v2v-1.28.1-1.55.el7.centos.2.x86_64
>>>> ovirt-vmconsole-1.0.0-1.el7.centos.noarch
>>>> ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch
>>>> libvirt-client-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-release36-007-1.noarch
>>>> libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64
>>>> libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64
>>>> ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch
>>>> ovirt-setup-lib-1.0.1-1.el7.centos.noarch
>>>> ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch
>>>>
>>>> I also have a series of stuck tasks that I can't clear related to
>>>> the host that can't be added... This is a secondary issue and I
>>>> don't want to get off track, but they look like this:
>>>> <PastedGraphic-2.png>
>>>>
>>>> I'd appreciate any help that can be offered.
>>>>
>>>> Cheers,
>>>> Gervais
>>>>
>>>>
>>>> Gervais de Montbrun
>>>> Systems Administrator / silverorange Inc.
>>>>
>>>> Phone +1 902 367 4532 ext. 104
>>>> <tel:%2B1%20902%20367%204532%20ext.%20104> <tel:+1 902 367 4532
>>>> ext. 104 <tel:%2B1%20902%20367%204532%20ext.%20104>>
>>>> Mobile +1 902 978 0009 <tel:%2B1%20902%20978%200009> <tel:+1 902
>>>> 978 0009 <tel:%2B1%20902%20978%200009>>
>>>>
>>>> <hosted-engine--deploy-logs.zip>
>>>
>>>
>>> Users mailing list
>>> Users(a)ovirt.org <mailto:Users@ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users
>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>>
>>> --
>>> Wee
>>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org <mailto:Users@ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
--------------050607040809020004050901
Content-Type: text/html; charset=utf-8
Content-Transfer-Encoding: 8bit
<html>
<head>
<meta content="text/html; charset=utf-8"
http-equiv="Content-Type">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">Hi Gervais,<br>
<br>
Hmm, can you tar up the logfiles (/var/log/vdsm/* on the host
you are installing on) and put them somewhere to look at? Also, I
found that starting VDSM from the command line is useful as it
sometimes spits out error messages that don't show up in the
logs. I think the command I used was:<br>
su -s /bin/bash vdsm<br>
python /usr/share/vdsm/vdsm<br>
<br>
My problem was that I customized the logging settings in
/etc/vdsm/*conf to try and tone down the debugging stuff and had a
syntax error.<br>
<br>
On 16-05-12 10:24 PM, Gervais de Montbrun wrote:<br>
</div>
<blockquote
cite="mid:CAESCRhP_6k3m45726-QFHsxv-be+LNWQNeQ+_XPc2sLnLrZ8PA@mail.gmail.com"
type="cite">
<div dir="ltr">
<div dir="auto" style="word-wrap:break-word">Hi
Charles,<br>
<br>
Thanks for the suggestion.<br>
<br>
I cleaned up again using the bash script from the
recoving-from-failed-install link below, then reinstalled (yum
install ovirt-hosted-engine-setup).<br>
<br>
I enabled NetworkManager and firewalld as you suggested. The
install stops very early on with an error:<br>
<span style="white-space:pre-wrap"> </span>[ ERROR ]
Failed to
execute stage 'Programs detection': hosted-engine cannot be
deployed while NetworkManager is running, please stop and
disable it before proceeding <br>
<br>
I disabled and stopped NetworkManager and tried again. Same
result. :(<br>
<br>
Any more guesses?<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 12, 2016, at 9:08 PM, Charles
Tassell <<a moz-do-not-send="true"
href="mailto:ctassell@gmail.com"
target="_blank">ctassell(a)gmail.com</a>&gt;
wrote:<br>
<br>
Hey Gervais,<br>
<br>
Try enabling NetworkManager and firewalld before doing the
hosted-engine --deploy. I have run into problems with oVirt
trying to perform tasks on hosts where firewalld is
disabled, so maybe you are running into a similar problem.
Also, I think the setup script will disable NetworkManager
if it needs to. I know I didn't manually disable it on any
of the boxes I installed on.<br>
<br>
On 16-05-12 04:49 PM, <a moz-do-not-send="true"
href="mailto:users-request@ovirt.org"
target="_blank">users-request(a)ovirt.org</a>
wrote:<br>
<blockquote type="cite">Message: 1<br>
Date: Thu, 12 May 2016 14:22:12 -0300<br>
From: Gervais de Montbrun <<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>&gt;<br>
To: Wee Sritippho <<a moz-do-not-send="true"
href="mailto:wee.s@forest.go.th"
target="_blank">wee.s(a)forest.go.th</a>&gt;<br>
Cc: users <<a moz-do-not-send="true"
href="mailto:users@ovirt.org"
target="_blank">users(a)ovirt.org</a>&gt;<br>
Subject: Re: [ovirt-users] Adding another host to my
cluster<br>
Message-ID: <<a moz-do-not-send="true"
href="mailto:28B7FC74-5C52-4F60-B9F3-39A36621A7CA@demontbrun.com"
target="_blank">28B7FC74-5C52-4F60-B9F3-39A36621A7CA(a)demontbrun.com</a>&gt;<br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
Hi Wee<br>
(and others)<br>
<br>
Thanks for the reply. I tried what you suggested, but I am
in the exact same state. :-(<br>
<br>
I don't want to completely remove my hosted engine setup
as it is working on the two other hosts in my cluster. I
did not run the rm -rf stes listed here (<a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank"><a class="moz-txt-link-freetext"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
<<a moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank">https://www.ovirt.org/documentation/how-to/h...)
that would wipe my hosted_engine nfs mount. If you know
that this is 100% necessary, please let me know.<br>
<br>
I did:<br>
hosted-engine --clean-metadata --force-cleanup --host-id=3<br>
run the bash script to remove all of the ovirt packages
and config files<br>
reinstalled ovirt-hosted-engine-setup<br>
ran "hosted-engine --deploy"<br>
<br>
I'm back exactly where I started. Is there a way to run
just the network configuration part of the deploy?<br>
<br>
Since the last attempt, I did upgrade my hosted engine and
my cluster is now running oVirt 3.6.5.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 12, 2016, at 11:50 AM, Wee
Sritippho <<a moz-do-not-send="true"
href="mailto:wee.s@forest.go.th"
target="_blank">wee.s(a)forest.go.th</a>&gt;
wrote:<br>
<br>
Hi,<br>
<br>
I used to have a similar problem where one of my host
can't be deployed due to the absence of ovirtmgmt
bridge. Simone said it's a bug ( <a
moz-do-not-send="true"
href="https://bugzilla.redhat.com/1323465"
target="_blank"><a
class="moz-txt-link-freetext"
href="https://bugzilla.redhat.com/1323465">https://bugzilla....
<<a moz-do-not-send="true"
href="https://bugzilla.redhat.com/1323465"
target="_blank">https://bugzilla.redhat.com/1323465</a>...
) which would be fixed in 3.6.6.<br>
<br>
This is what I've done to solve it:<br>
<br>
1. In the web UI, set the failed host to maintenance.<br>
2. Remove it.<br>
3. In that host, run a script from <a
moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank"><a
class="moz-txt-link-freetext"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
<<a moz-do-not-send="true"
href="https://www.ovirt.org/documentation/how-to/hosted-engine/#reco...
target="_blank">https://www.ovirt.org/documentation/how-to/h...
4. Install ovirt-hosted-engine-setup again.<br>
5. Redeploy again.<br>
<br>
Hope that helps<br>
<br>
On 11 ??????? 2016 22 ?????? 48 ???? 58 ??????
GMT+07:00, Gervais de Montbrun <<a
moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank"><a class="moz-txt-link-abbreviated"
href="mailto:gervais@demontbrun.com">gervais@demontbrun.com</a></a>>
wrote:<br>
Hi Folks,<br>
<br>
I hate to reply to my own message, but I'm really hoping
someone can help me with my issue<br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/pipermail/users/2016-May/039690.html"
target="_blank">http://lists.ovirt.org/pipermail/users/2016-...
<<a moz-do-not-send="true"
href="http://lists.ovirt.org/pipermail/users/2016-May/039690.html"
target="_blank">http://lists.ovirt.org/pipermail/users/2016-...
<br>
Does anyone have a suggestion for me? If there is any
more information that I can provide that would help you
to help me, please advise.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
<br>
<blockquote type="cite">On May 9, 2016, at 1:42 PM,
Gervais de Montbrun <<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>
<mailto:<a moz-do-not-send="true"
href="mailto:gervais@demontbrun.com"
target="_blank">gervais(a)demontbrun.com</a>&gt;&gt;
wrote:<br>
<br>
Hi All,<br>
<br>
I'm trying to add a third host into my oVirt cluster.
I have hosted engine setup on the first two. It's
failing to finish the hosted-engine --deploy on this
third host. I wiped the server and did a CentOS 7
minimum install and ran it again to have a clean
machine.<br>
<br>
My setup:<br>
CentOS 7 clean install<br>
yum install -y <a moz-do-not-send="true"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm"
target="_blank">http://resources.ovirt.org/pub/yum-repo/ovir...
<<a moz-do-not-send="true"
href="http://resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm"
target="_blank">http://resources.ovirt.org/pub/yum-repo/ovir...
yum install -y ovirt-hosted-engine-setup<br>
yum upgrade -y && reboot<br>
systemctl disable NetworkManager ; systemctl stop
NetworkManager ; systemctl disable firewalld ;
systemctl stop firewalld<br>
hosted-engine --deploy<br>
<br>
hosted-engine --deploy always throws an error:<br>
[ ERROR ] The VDSM host was found in a failed state.
Please check engine and bootstrap installation logs.<br>
[ ERROR ] Unable to add Cultivar2 to the manager<br>
and then echo's<br>
[ INFO ] Waiting for VDSM hardware info<br>
...<br>
[ ERROR ] Failed to execute stage 'Closing up': VDSM
did not start within 120 seconds<br>
[ INFO ] Stage: Clean up<br>
[ INFO ] Generating answer file
'/var/lib/ovirt-hosted-engine-setup/answers/answers-20160509131103.conf'<br>
[ INFO ] Stage: Pre-termination<br>
[ INFO ] Stage: Termination<br>
[ ERROR ] Hosted Engine deployment failed: this system
is not reliable, please check the issue, fix and
redeploy<br>
Log file is located at
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160509130658-qb8ev0.log<br>
<br>
Full output of hosted-engine --deploy included in the
attached zip file.<br>
I've also included vdsm.log (There is more than one
tries worth of tries in there).<br>
You'll also find the
ovirt-hosted-engine-setup-20160509130658-qb8ev0.log
listed above.<br>
<br>
This is my "test" setup. Cultivar0 is my first host
and my nfs server for storage. I have two hosts in the
setup already and everything is working fine. The host
does show up in the oVirt admin, but shows "Installed
Failed"<br>
<PastedGraphic-1.png><br>
<br>
Trying to reinstall from within the interface just
fails again.<br>
<br>
The ovirt bridge interface is not configured and there
are no config files in /etc/sysconfi/network-scripts
related to ovirt.<br>
<br>
OS:<br>
[root@cultivar2 ovirt-hosted-engine-setup]# cat
/etc/redhat-release<br>
CentOS Linux release 7.2.1511 (Core)<br>
<br>
[root@cultivar2 ovirt-hosted-engine-setup]# uname -a<br>
Linux <a moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com"
target="_blank">cultivar2.grove.silverorange.com</a>
<<a moz-do-not-send="true"
href="http://cultivar2.grove.silverorange.com/"
target="_blank">http://cultivar2.grove.silverorange.com/<...
3.10.0-327.13.1.el7.x86_64 #1 SMP Thu Mar 31 16:04:38
UTC 2016 x86_64 x86_64 x86_64 GNU/Linux<br>
<br>
Versions:<br>
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa |
grep -i ovirt<br>
libgovirt-0.3.3-1.el7_2.1.x86_64<br>
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch<br>
ovirt-host-deploy-1.4.1-1.el7.centos.noarch<br>
ovirt-vmconsole-1.0.0-1.el7.centos.noarch<br>
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch<br>
ovirt-release36-007-1.noarch<br>
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch<br>
ovirt-setup-lib-1.0.1-1.el7.centos.noarch<br>
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch<br>
[root@cultivar2 ovirt-hosted-engine-setup]#<br>
[root@cultivar2 ovirt-hosted-engine-setup]#<br>
[root@cultivar2 ovirt-hosted-engine-setup]#<br>
[root@cultivar2 ovirt-hosted-engine-setup]# rpm -qa |
grep -i virt<br>
libvirt-daemon-driver-secret-1.2.17-13.el7_2.4.x86_64<br>
virt-viewer-2.0-6.el7.x86_64<br>
libgovirt-0.3.3-1.el7_2.1.x86_64<br>
libvirt-daemon-kvm-1.2.17-13.el7_2.4.x86_64<br>
ovirt-hosted-engine-setup-1.3.5.0-1.1.el7.noarch<br>
fence-virt-0.3.2-2.el7.x86_64<br>
virt-what-1.13-6.el7.x86_64<br>
libvirt-python-1.2.17-2.el7.x86_64<br>
libvirt-daemon-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-config-nwfilter-1.2.17-13.el7_2.4.x86_64<br>
libvirt-lock-sanlock-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-nodedev-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-network-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-storage-1.2.17-13.el7_2.4.x86_64<br>
ovirt-host-deploy-1.4.1-1.el7.centos.noarch<br>
virt-v2v-1.28.1-1.55.el7.centos.2.x86_64<br>
ovirt-vmconsole-1.0.0-1.el7.centos.noarch<br>
ovirt-vmconsole-host-1.0.0-1.el7.centos.noarch<br>
libvirt-client-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-nwfilter-1.2.17-13.el7_2.4.x86_64<br>
ovirt-release36-007-1.noarch<br>
libvirt-daemon-driver-interface-1.2.17-13.el7_2.4.x86_64<br>
libvirt-daemon-driver-qemu-1.2.17-13.el7_2.4.x86_64<br>
ovirt-engine-sdk-python-3.6.5.0-1.el7.centos.noarch<br>
ovirt-setup-lib-1.0.1-1.el7.centos.noarch<br>
ovirt-hosted-engine-ha-1.3.5.3-1.1.el7.noarch<br>
<br>
I also have a series of stuck tasks that I can't clear
related to the host that can't be added... This is a
secondary issue and I don't want to get off track, but
they look like this:<br>
<PastedGraphic-2.png><br>
<br>
I'd appreciate any help that can be offered.<br>
<br>
Cheers,<br>
Gervais<br>
<br>
<br>
Gervais de Montbrun<br>
Systems Administrator / silverorange Inc.<br>
<br>
Phone <span
style="white-space:pre-wrap"> </span><a
moz-do-not-send="true"
href="tel:%2B1%20902%20367%204532%20ext.%20104"
value="+19023674532" target="_blank">+1 902 367
4532
ext. 104</a> <tel:<a moz-do-not-send="true"
href="tel:%2B1%20902%20367%204532%20ext.%20104"
value="+19023674532" target="_blank">+1 902 367
4532
ext. 104</a>><br>
Mobile <span
style="white-space:pre-wrap"> </span><a
moz-do-not-send="true"
href="tel:%2B1%20902%20978%200009"
value="+19029780009" target="_blank">+1 902 978
0009</a>
<tel:<a moz-do-not-send="true"
href="tel:%2B1%20902%20978%200009"
value="+19029780009" target="_blank">+1 902 978
0009</a>><br>
<br>
<hosted-engine--deploy-logs.zip><br>
</blockquote>
<br>
<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
<br>
-- <br>
Wee<br>
</blockquote>
<br>
</blockquote>
<br>
_______________________________________________<br>
Users mailing list<br>
<a moz-do-not-send="true"
href="mailto:Users@ovirt.org"
target="_blank">Users(a)ovirt.org</a><br>
<a moz-do-not-send="true"
href="http://lists.ovirt.org/mailman/listinfo/users"
target="_blank">http://lists.ovirt.org/mailman/listinfo/user...
</blockquote>
<br>
</div>
</div>
</blockquote>
<br>
</body>
</html>
--------------050607040809020004050901--