12:27 p.m.
Hi all,
Yanir is right, the local vm.conf is just a cache of what was
retrieved from the engine.
I might be interesting to check what the configuration of the engine
VM shows when edited using the webadmin. Or enable debug logging [1]
for hosted engine and add the OVF dump we send there now and then (the
xml representation of the VM).
[1] See /etc/ovirt-hosted-engine-ha/agent-log.conf and change the
level for root logger to DEBUG
Best regards
Martin Sivak
On Wed, Jun 7, 2017 at 11:12 AM, Yanir Quinn <yquinn(a)redhat.com> wrote:
If im not mistaken the values of vm.conf are repopulated from the
database ,
but i wouldn't recommend meddling with DB data.
maybe the network device wasn't set properly during the hosted engine setup
?
On Wed, Jun 7, 2017 at 11:47 AM, Arsène Gschwind <arsene.gschwind(a)unibas.ch>
wrote:
>
> Hi,
>
> Any chance to get a hint how to change the vm.conf file so it will not be
> overwritten constantly?
>
> Thanks a lot.
>
> Arsène
>
>
> On 06/06/2017 09:50 AM, Arsène Gschwind wrote:
>
> Hi,
>
> I've migrated our oVirt engine to hosted-engine located on a FC storage
> LUN, so far so good.
> For some reason I'm not able to start the hosted-engine VM, after digging
> in the log files i could figured out the reason. The Network device was set
> to "None" as follow:
>
>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:None,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>
> I've created a new config file /var/run/ovirt-hosted-engine-ha/vm.conf.new
> and set the nic device to ovirtmgnt, the I could start the hosted-engine
> using :
> hosted-engine --vm-start
> --vm-conf=var/run/ovirt-hosted-engine-ha/vm.conf.new
>
> The nic device line in vm.conf.new looks like:
>
>
devices={nicModel:pv,macAddr:00:16:3e:3a:6b:60,linkActive:true,network:ovirtmgmt,deviceId:56cb4d71-13ff-42a8-bb83-7faef99fd3ea,address:{slot:0x03,bus:0x00,domain:0x0000,type:pci,function:0x0},device:bridge,type:interface}
>
> I tried to find out a way to change this setting on vm.conf but it is
> constantly rewritten, even when using the webui is say's:
> HostedEngine:
>
> There was an attempt to change Hosted Engine VM values that are locked.
>
> Is there a way to modify/correct the hosted-engine vm.conf file so it will
> stay and not be overwritten?
>
> Thanks a lot for any hint/help
>
> rgds,
> arsène
>
> --
>
> Arsène Gschwind
> Fa. Sapify AG im Auftrag der Universität Basel
> IT Services
> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
> Tel. +41 79 449 25 63 | http://its.unibas.ch
> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
>
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> --
>
> Arsène Gschwind
> Fa. Sapify AG im Auftrag der Universität Basel
> IT Services
> Klingelbergstr. 70 | CH-4056 Basel | Switzerland
> Tel. +41 79 449 25 63 | http://its.unibas.ch
> ITS-ServiceDesk: support-its(a)unibas.ch | +41 61 267 14 11
>
>
> _______________________________________________
> Users mailing list
> Users(a)ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users