4:46 p.m.
One more thing is - firewall rules.
For 3 gluster bricks I have configured following:
firewall-cmd --zone=public --add-port=24007-24009/tcp
--add-port=49152-49664/tcp --permanent
and this seems not enough. have to stop the firewall in order to make the
cluster working.
I have noticed 490xx being used by gluster, any ideas on that documented
range?
lsof -i | grep gluster | grep "490"
glusterfs 32301 root 10u IPv4 148985 0t0 TCP
ovirt1:49159->ovirt1:49099 (ESTABLISHED)
glusterfs 32301 root 17u IPv4 153084 0t0 TCP
ovirt1:49159->ovirt2:49096 (ESTABLISHED)
glusterfs 46346 root 17u IPv4 156437 0t0 TCP
ovirt1:49161->ovirt1:49093 (ESTABLISHED)
glusterfs 46346 root 18u IPv4 149985 0t0 TCP
ovirt1:49161->ovirt2:49090 (ESTABLISHED)
glusterfs 46380 root 8u IPv4 151389 0t0 TCP
ovirt1:49090->ovirt3:49161 (ESTABLISHED)
glusterfs 46380 root 11u IPv4 148986 0t0 TCP
ovirt1:49091->ovirt2:49161 (ESTABLISHED)
glusterfs 46380 root 21u IPv4 153074 0t0 TCP
ovirt1:49099->ovirt1:49159 (ESTABLISHED)
glusterfs 46380 root 25u IPv4 153075 0t0 TCP
ovirt1:49097->ovirt2:49160 (ESTABLISHED)
glusterfs 46380 root 26u IPv4 153076 0t0 TCP
ovirt1:49095->ovirt3:49159 (ESTABLISHED)
glusterfs 46380 root 27u IPv4 153077 0t0 TCP
ovirt1:49093->ovirt1:49161 (ESTABLISHED)
Regards,
Artem
On Thu, Nov 9, 2017 at 3:56 PM, Artem Tambovskiy <artem.tambovskiy(a)gmail.com
wrote:
> Hi,
>
> Just realized that I probably went in the wrong way. Reinstalled
> everything from the scratch added 4 volumes (hosted_engine, data, export,
> iso). All looks good so far.
> But if go to the Cluster properties and tick the checkbox "Enable Cluster
> Service" - the host will be marked as Non-Operational. Am I messing up the
> things?
> Or I'm just fine as long as I already have a Data (Master) Storage Domain
> over GlusterFS?
>
> Regards,
> Artem
>
> On Thu, Nov 9, 2017 at 2:46 PM, Fred Rolland <frolland(a)redhat.com wrote:
>
>> Hi,
>>
>> The steps for this kind of setup are described in [1].
>> However it seems you have already succeeded in installing, so maybe you
>> need some additional steps [2]
>> Did you add a storage domain that will act as Master Domain? It is
>> needed, then the initial Storage Domain should be imported automatically.
>>
>>
>> [1] https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt
>> -4.1-and-gluster-storage/
>> [2] https://www.ovirt.org/documentation/gluster-hyperconverged/
>> chap-Additional_Steps/
>>
>> On Thu, Nov 9, 2017 at 10:50 AM, Artem Tambovskiy <
>> artem.tambovskiy(a)gmail.com wrote:
>>
>>> Another yet attempt to get a help on hosted-engine deployment with
>>> glusterfs cluster.
>>> I already spend a day trying to get bring such a setup to work with no
>>> luck.
>>>
>>> The hosted engine being successfully deployed but I can't activate the
>>> host, the storage domain for the host is missing and I can't even add
it.
>>> So either something went wrong during deployment or my glusterfs cluster
>>> doesn't configured properly.
>>>
>>> That are the prerequisites for this?
>>>
>>> - glusterfs cluster of 3 nodes with replica 3 volume
>>> - Any specific volume configs?
>>> - how many volumes should I prepare for hosted engine deployment?
>>>
>>> Any other thoughts?
>>>
>>> Regards,
>>> Artem
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users(a)ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>>>
>>
>