6:34 a.m.
As I told you, you could just downgrade gluster on all nodes and later plan to live
migrate the VM disks.
I had to copy my data to the new volume, so I can avoid the ACL bug , when I use newer
versions of gluster.
Let's clarify some details:
1. Which version of oVirt and Gluster are you using ?
2. You now have your old gluster volume attached to oVirt and the new volume unused,
right ?
3. Did you copy the contents of the old volume to the new one ?
Best Regards,
Strahil Nikolov
На 23 юни 2020 г. 4:34:19 GMT+03:00, C Williams <cwilliams3320(a)gmail.com> написа:
>Strahil,
>
>Thank You For Help !
>
>Downgrading Gluster to 6.5 got the original storage domain working
>again !
>
>After, I finished my copy of the contents of the problematic volume to
>a
>new volume, I did the following
>
>Unmounted the mount points
>Stopped the original problematic Gluster volume
>On each problematic peer,
>I downgraded Gluster to 6.5
>(yum downgrade glusterfs-6.5-1.el7.x86_64
>vdsm-gluster-4.30.46-1.el7.x86_64
>python2-gluster-6.5-1.el7.x86_64 glusterfs-libs-6.5-1.el7.x86_64
>glusterfs-cli-6.5-1.el7.x86_64 glusterfs-fuse-6.5-1.el7.x86_64
>glusterfs-rdma-6.5-1.el7.x86_64 glusterfs-api-6.5-1.el7.x86_64
>glusterfs-server-6.5-1.el7.x86_64 glusterfs-events-6.5-1.el7.x86_64
>glusterfs-client-xlators-6.5-1.el7.x86_64
>glusterfs-geo-replication-6.5-1.el7.x86_64)
>Restarted glusterd (systemctl restart glusterd)
>Restarted the problematic Gluster volume
>Reattached the problematic storage domain
>Started the problematic storage domain
>
>Things work now. I can now run VMs and write data, copy virtual disks,
>move
>virtual disks to other storage domains, etc.
>
>I am very thankful that the storage domain is working again !
>
>How can I safely perform upgrades on Gluster ! When will it be safe to
>do
>so ?
>
>Thank You Again For Your Help !
>
>On Mon, Jun 22, 2020 at 10:58 AM C Williams <cwilliams3320(a)gmail.com>
>wrote:
>
>> Strahil,
>>
>> I have downgraded the target. The copy from the problematic volume to
>the
>> target is going on now.
>> Once I have the data copied, I might downgrade the problematic
>volume's
>> Gluster to 6.5.
>> At that point I might reattach the original ovirt domain and see if
>it
>> will work again.
>> But the copy is going on right now.
>>
>> Thank You For Your Help !
>>
>> On Mon, Jun 22, 2020 at 10:52 AM Strahil Nikolov
><hunter86_bg(a)yahoo.com>
>> wrote:
>>
>>> You should ensure that in the storage domain tab, the old storage
>is
>>> not visible.
>>>
>>> I still wander why yoiu didn't try to downgrade first.
>>>
>>> Best Regards,
>>> Strahil Nikolov
>>>
>>> На 22 юни 2020 г. 13:58:33 GMT+03:00, C Williams
><cwilliams3320(a)gmail.com>
>>> написа:
>>> >Strahil,
>>> >
>>> >The GLCL3 storage domain was detached prior to attempting to add
>the
>>> >new
>>> >storage domain.
>>> >
>>> >Should I also "Remove" it ?
>>> >
>>> >Thank You For Your Help !
>>> >
>>> >---------- Forwarded message ---------
>>> >From: Strahil Nikolov <hunter86_bg(a)yahoo.com>
>>> >Date: Mon, Jun 22, 2020 at 12:50 AM
>>> >Subject: Re: [ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain
>>> >To: C Williams <cwilliams3320(a)gmail.com>
>>> >Cc: users <Users(a)ovirt.org>
>>> >
>>> >
>>> >You can't add the new volume as it contains the same data (UUID) as
>the
>>> >old
>>> >one , thus you need to detach the old one before adding the new one
>-
>>> >of
>>> >course this means downtime for all VMs on that storage.
>>> >
>>> >As you see , downgrading is more simpler. For me v6.5 was working,
>>> >while
>>> >anything above (6.6+) was causing complete lockdown. Also v7.0 was
>>> >working, but it's supported in oVirt 4.4.
>>> >
>>> >Best Regards,
>>> >Strahil Nikolov
>>> >
>>> >На 22 юни 2020 г. 7:21:15 GMT+03:00, C Williams
>>> ><cwilliams3320(a)gmail.com>
>>> >написа:
>>> >>Another question
>>> >>
>>> >>What version could I downgrade to safely ? I am at 6.9 .
>>> >>
>>> >>Thank You For Your Help !!
>>> >>
>>> >>On Sun, Jun 21, 2020 at 11:38 PM Strahil Nikolov
>>> >><hunter86_bg(a)yahoo.com>
>>> >>wrote:
>>> >>
>>> >>> You are definitely reading it wrong.
>>> >>> 1. I didn't create a new storage domain ontop this new
volume.
>>> >>> 2. I used cli
>>> >>>
>>> >>> Something like this (in your case it should be 'replica
3'):
>>> >>> gluster volume create newvol replica 3 arbiter 1
>>> >>ovirt1:/new/brick/path
>>> >>> ovirt2:/new/brick/path ovirt3:/new/arbiter/brick/path
>>> >>> gluster volume start newvol
>>> >>>
>>> >>> #Detach oldvol from ovirt
>>> >>>
>>> >>> mount -t glusterfs ovirt1:/oldvol /mnt/oldvol
>>> >>> mount -t glusterfs ovirt1:/newvol /mnt/newvol
>>> >>> cp -a /mnt/oldvol/* /mnt/newvol
>>> >>>
>>> >>> #Add only newvol as a storage domain in oVirt
>>> >>> #Import VMs
>>> >>>
>>> >>> I still think that you should downgrade your gluster
packages!!!
>>> >>>
>>> >>> Best Regards,
>>> >>> Strahil Nikolov
>>> >>>
>>> >>> На 22 юни 2020 г. 0:43:46 GMT+03:00, C Williams
>>> >><cwilliams3320(a)gmail.com>
>>> >>> написа:
>>> >>> >Strahil,
>>> >>> >
>>> >>> >It sounds like you used a "System Managed Volume"
for the new
>>> >>storage
>>> >>> >domain,is that correct?
>>> >>> >
>>> >>> >Thank You For Your Help !
>>> >>> >
>>> >>> >On Sun, Jun 21, 2020 at 5:40 PM C Williams
>>> ><cwilliams3320(a)gmail.com>
>>> >>> >wrote:
>>> >>> >
>>> >>> >> Strahil,
>>> >>> >>
>>> >>> >> So you made another oVirt Storage Domain -- then copied
the
>data
>>> >>with
>>> >>> >cp
>>> >>> >> -a from the failed volume to the new volume.
>>> >>> >>
>>> >>> >> At the root of the volume there will be the old domain
folder
>id
>>> >>ex
>>> >>> >> 5fe3ad3f-2d21-404c-832e-4dc7318ca10d
>>> >>> >> in my case. Did that cause issues with making the new
domain
>>> >>since
>>> >>> >it is
>>> >>> >> the same folder id as the old one ?
>>> >>> >>
>>> >>> >> Thank You For Your Help !
>>> >>> >>
>>> >>> >> On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov
>>> >>> ><hunter86_bg(a)yahoo.com>
>>> >>> >> wrote:
>>> >>> >>
>>> >>> >>> In my situation I had only the ovirt nodes.
>>> >>> >>>
>>> >>> >>> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams
>>> >>> ><cwilliams3320(a)gmail.com>
>>> >>> >>> написа:
>>> >>> >>> >Strahil,
>>> >>> >>> >
>>> >>> >>> >So should I make the target volume on 3 bricks
which do not
>>> >have
>>> >>> >ovirt
>>> >>> >>> >--
>>> >>> >>> >just gluster ? In other words (3) Centos 7
hosts ?
>>> >>> >>> >
>>> >>> >>> >Thank You For Your Help !
>>> >>> >>> >
>>> >>> >>> >On Sun, Jun 21, 2020 at 3:08 PM Strahil
Nikolov
>>> >>> ><hunter86_bg(a)yahoo.com>
>>> >>> >>> >wrote:
>>> >>> >>> >
>>> >>> >>> >> I created a fresh volume (which is not
an ovirt sgorage
>>> >>> >domain),
>>> >>> >>> >set
>>> >>> >>> >> the original storage domain in
maintenance and
>detached
>>> >>it.
>>> >>> >>> >> Then I 'cp -a ' the data from the
old to the new volume.
>>> >>Next,
>>> >>> >I
>>> >>> >>> >just
>>> >>> >>> >> added the new storage domain (the old
one was a
>kind
>>> >>of a
>>> >>> >>> >> 'backup') - pointing to the new
volume name.
>>> >>> >>> >>
>>> >>> >>> >> If you observe issues , I would
recommend you to
>>> >>downgrade
>>> >>> >>> >> gluster packages one node at a time .
Then you might
>be
>>> >>able
>>> >>> >to
>>> >>> >>> >> restore your oVirt operations.
>>> >>> >>> >>
>>> >>> >>> >> Best Regards,
>>> >>> >>> >> Strahil Nikolov
>>> >>> >>> >>
>>> >>> >>> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C
Williams
>>> >>> >>> ><cwilliams3320(a)gmail.com>
>>> >>> >>> >> написа:
>>> >>> >>> >> >Strahil,
>>> >>> >>> >> >
>>> >>> >>> >> >Thanks for the follow up !
>>> >>> >>> >> >
>>> >>> >>> >> >How did you copy the data to another
volume ?
>>> >>> >>> >> >
>>> >>> >>> >> >I have set up another storage domain
GLCLNEW1 with a new
>>> >>volume
>>> >>> >>> >imgnew1
>>> >>> >>> >> >.
>>> >>> >>> >> >How would you copy all of the data
from the problematic
>>> >>domain
>>> >>> >GLCL3
>>> >>> >>> >> >with
>>> >>> >>> >> >volume images3 to GLCLNEW1 and volume
imgnew1 and
>preserve
>>> >>all
>>> >>> >the
>>> >>> >>> >VMs,
>>> >>> >>> >> >VM
>>> >>> >>> >> >disks, settings, etc. ?
>>> >>> >>> >> >
>>> >>> >>> >> >Remember all of the regular ovirt disk
copy, disk move,
>VM
>>> >>> >export
>>> >>> >>> >> >tools
>>> >>> >>> >> >are failing and my VMs and disks are
trapped on domain
>GLCL3
>>> >>and
>>> >>> >>> >volume
>>> >>> >>> >> >images3 right now.
>>> >>> >>> >> >
>>> >>> >>> >> >Please let me know
>>> >>> >>> >> >
>>> >>> >>> >> >Thank You For Your Help !
>>> >>> >>> >> >
>>> >>> >>> >> >
>>> >>> >>> >> >
>>> >>> >>> >> >
>>> >>> >>> >> >
>>> >>> >>> >> >On Sun, Jun 21, 2020 at 8:27 AM
Strahil Nikolov
>>> >>> >>> ><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >wrote:
>>> >>> >>> >> >
>>> >>> >>> >> >> Sorry to hear that.
>>> >>> >>> >> >> I can say that for me 6.5 was
working, while 6.6
>>> >didn't
>>> >>> >and I
>>> >>> >>> >> >upgraded
>>> >>> >>> >> >> to 7.0 .
>>> >>> >>> >> >> In the ended , I have ended
with creating a new
>fresh
>>> >>> >volume
>>> >>> >>> >and
>>> >>> >>> >> >> physically copying the data
there, then I detached
>the
>>> >>> >storage
>>> >>> >>> >> >domains and
>>> >>> >>> >> >> attached to the new ones
(which holded the old
>data),
>>> >>but
>>> >>> >I
>>> >>> >>> >> >could
>>> >>> >>> >> >> afford the downtime.
>>> >>> >>> >> >> Also, I can say that v7.0 (
but not 7.1 or
>anything
>>> >>later)
>>> >>> >>> >also
>>> >>> >>> >> >> worked without the ACL issue,
but it causes some
>>> >trouble
>>> >>> >in
>>> >>> >>> >oVirt
>>> >>> >>> >> >- so
>>> >>> >>> >> >> avoid that unless you have no
other options.
>>> >>> >>> >> >>
>>> >>> >>> >> >> Best Regards,
>>> >>> >>> >> >> Strahil Nikolov
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >> >> На 21 юни 2020 г. 4:39:46
GMT+03:00, C Williams
>>> >>> >>> >> ><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> написа:
>>> >>> >>> >> >> >Hello,
>>> >>> >>> >> >> >
>>> >>> >>> >> >> >Upgrading diidn't help
>>> >>> >>> >> >> >
>>> >>> >>> >> >> >Still acl errors trying to
use a Virtual Disk from a
>VM
>>> >>> >>> >> >> >
>>> >>> >>> >> >> >[root@ov06 bricks]# tail
bricks-brick04-images3.log |
>>> >grep
>>> >>> >acl
>>> >>> >>> >> >> >[2020-06-21 01:33:45.665888]
I [MSGID: 139001]
>>> >>> >>> >> >>
>[posix-acl.c:263:posix_acl_log_permit_denied]
>>> >>> >>> >> >0-images3-access-control:
>>> >>> >>> >> >> >client:
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0,
>>> >>> >>> >> >> >gfid:
be318638-e8a0-4c6d-977d-7a937aa84806,
>>> >>> >>> >> >>
>req(uid:107,gid:107,perm:1,ngrps:3),
>>> >>> >>> >> >>
>>ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID,
>>> >>> >acl:-)
>>> >>> >>> >> >> >[Permission denied]
>>> >>> >>> >> >> >The message "I [MSGID:
139001]
>>> >>> >>> >> >>
>[posix-acl.c:263:posix_acl_log_permit_denied]
>>> >>> >>> >> >0-images3-access-control:
>>> >>> >>> >> >> >client:
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0,
>>> >>> >>> >> >> >gfid:
be318638-e8a0-4c6d-977d-7a937aa84806,
>>> >>> >>> >> >>
>req(uid:107,gid:107,perm:1,ngrps:3),
>>> >>> >>> >> >>
>>ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID,
>>> >>> >acl:-)
>>> >>> >>> >> >> >[Permission denied]"
repeated 2 times between
>[2020-06-21
>>> >>> >>> >> >> >01:33:45.665888]
>>> >>> >>> >> >> >and [2020-06-21
01:33:45.806779]
>>> >>> >>> >> >> >
>>> >>> >>> >> >> >Thank You For Your Help !
>>> >>> >>> >> >> >
>>> >>> >>> >> >> >On Sat, Jun 20, 2020 at 8:59
PM C Williams
>>> >>> >>> ><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >wrote:
>>> >>> >>> >> >> >
>>> >>> >>> >> >> >> Hello,
>>> >>> >>> >> >> >>
>>> >>> >>> >> >> >> Based on the situation,
I am planning to upgrade
>the 3
>>> >>> >affected
>>> >>> >>> >> >> >hosts.
>>> >>> >>> >> >> >>
>>> >>> >>> >> >> >> My reasoning is that the
hosts/bricks were attached
>to
>>> >>6.9
>>> >>> >at
>>> >>> >>> >one
>>> >>> >>> >> >> >time.
>>> >>> >>> >> >> >>
>>> >>> >>> >> >> >> Thanks For Your Help !
>>> >>> >>> >> >> >>
>>> >>> >>> >> >> >> On Sat, Jun 20, 2020 at
8:38 PM C Williams
>>> >>> >>> >> ><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >> wrote:
>>> >>> >>> >> >> >>
>>> >>> >>> >> >> >>> Strahil,
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> The gluster version
on the current 3 gluster hosts
>is
>>> >>6.7
>>> >>> >>> >(last
>>> >>> >>> >> >> >update
>>> >>> >>> >> >> >>> 2/26). These 3 hosts
provide 1 brick each for the
>>> >>replica
>>> >>> >3
>>> >>> >>> >> >volume.
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> Earlier I had tried
to add 6 additional hosts to
>the
>>> >>> >cluster.
>>> >>> >>> >> >Those
>>> >>> >>> >> >> >new
>>> >>> >>> >> >> >>> hosts were 6.9
gluster.
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> I attempted to make
a new separate volume with 3
>>> >bricks
>>> >>> >>> >provided
>>> >>> >>> >> >by
>>> >>> >>> >> >> >the 3
>>> >>> >>> >> >> >>> new gluster 6.9
hosts. After having many errors
>from
>>> >>the
>>> >>> >>> >oVirt
>>> >>> >>> >> >> >interface,
>>> >>> >>> >> >> >>> I gave up and
removed the 6 new hosts from the
>>> >cluster.
>>> >>> >That
>>> >>> >>> >is
>>> >>> >>> >> >> >where the
>>> >>> >>> >> >> >>> problems started.
The intent was to expand the
>gluster
>>> >>> >cluster
>>> >>> >>> >> >while
>>> >>> >>> >> >> >making
>>> >>> >>> >> >> >>> 2 new volumes for
that cluster. The ovirt compute
>>> >>cluster
>>> >>> >>> >would
>>> >>> >>> >> >> >allow for
>>> >>> >>> >> >> >>> efficient VM
migration between 9 hosts -- while
>having
>>> >>> >>> >separate
>>> >>> >>> >> >> >gluster
>>> >>> >>> >> >> >>> volumes for safety
purposes.
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> Looking at the brick
logs, I see where there are
>acl
>>> >>> >errors
>>> >>> >>> >> >starting
>>> >>> >>> >> >> >from
>>> >>> >>> >> >> >>> the time of the
removal of the 6 new hosts.
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> Please check out the
attached brick log from
>6/14-18.
>>> >>The
>>> >>> >>> >events
>>> >>> >>> >> >> >started
>>> >>> >>> >> >> >>> on 6/17.
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> I wish I had a
downgrade path.
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> Thank You For The
Help !!
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>> On Sat, Jun 20, 2020
at 7:47 PM Strahil Nikolov
>>> >>> >>> >> >>
><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>> wrote:
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >> >>>> Hi ,
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> This one really
looks like the ACL bug I was hit
>with
>>> >>> >when I
>>> >>> >>> >> >> >updated
>>> >>> >>> >> >> >>>> from Gluster
v6.5 to 6.6 and later from 7.0 to
>7.2.
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> Did you update
your setup recently ? Did you
>upgrade
>>> >>> >gluster
>>> >>> >>> >> >also ?
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> You have to
check the gluster logs in order to
>verify
>>> >>> >that,
>>> >>> >>> >so
>>> >>> >>> >> >you
>>> >>> >>> >> >> >can
>>> >>> >>> >> >> >>>> try:
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> 1. Set Gluster
logs to trace level (for details
>>> >check:
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >
>>> >>> >>> >> >>
>>> >>> >>> >> >
>>> >>> >>> >>
>>> >>> >>> >
>>> >>> >>>
>>> >>> >
>>> >>>
>>> >>
>>> >
>>>
>https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level
>>> >>> >>> >> >> >>>> )
>>> >>> >>> >> >> >>>> 2. Power up a VM
that was already off , or retry
>the
>>> >>> >>> >procedure
>>> >>> >>> >> >from
>>> >>> >>> >> >> >the
>>> >>> >>> >> >> >>>> logs you sent.
>>> >>> >>> >> >> >>>> 3. Stop the
trace level of the logs
>>> >>> >>> >> >> >>>> 4. Check libvirt
logs on the host that was
>supposed
>>> >to
>>> >>> >power
>>> >>> >>> >up
>>> >>> >>> >> >the
>>> >>> >>> >> >> >VM
>>> >>> >>> >> >> >>>> (in case a VM
was powered on)
>>> >>> >>> >> >> >>>> 5. Check the
gluster brick logs on all nodes for
>ACL
>>> >>> >errors.
>>> >>> >>> >> >> >>>> Here is a sample
from my old logs:
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>gluster_bricks-data_fast4-data_fast4.log:[2020-03-18
>>> >>> >>> >> >> >13:19:41.489047] I
>>> >>> >>> >> >> >>>> [MSGID: 139001]
>>> >>> >[posix-acl.c:262:posix_acl_log_permit_denied]
>>> >>> >>> >> >> >>>>
0-data_fast4-access-control: client:
>>> >>> >CTX_ID:4a654305-d2e4-
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19,
>>> >>> >>> >> >> >>>> gfid:
be318638-e8a0-4c6d-977d-7a937aa84806,
>>> >>> >>> >> >> >>>>
req(uid:36,gid:36,perm:1,ngrps:3), ctx
>>> >>> >>> >> >> >>>>
>>> >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID,
>>> >>> >acl:-)
>>> >>> >>> >> >> >>>> [Permission
denied]
>>> >>> >>> >> >> >>>>
>gluster_bricks-data_fast4-data_fast4.log:[2020-03-18
>>> >>> >>> >> >> >13:22:51.818796] I
>>> >>> >>> >> >> >>>> [MSGID: 139001]
>>> >>> >[posix-acl.c:262:posix_acl_log_permit_denied]
>>> >>> >>> >> >> >>>>
0-data_fast4-access-control: client:
>>> >>> >CTX_ID:4a654305-d2e4-
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19,
>>> >>> >>> >> >> >>>> gfid:
be318638-e8a0-4c6d-977d-7a937aa84806,
>>> >>> >>> >> >> >>>>
req(uid:36,gid:36,perm:1,ngrps:3), ctx
>>> >>> >>> >> >> >>>>
>>> >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID,
>>> >>> >acl:-)
>>> >>> >>> >> >> >>>> [Permission
denied]
>>> >>> >>> >> >> >>>>
>gluster_bricks-data_fast4-data_fast4.log:[2020-03-18
>>> >>> >>> >> >> >13:24:43.732856] I
>>> >>> >>> >> >> >>>> [MSGID: 139001]
>>> >>> >[posix-acl.c:262:posix_acl_log_permit_denied]
>>> >>> >>> >> >> >>>>
0-data_fast4-access-control: client:
>>> >>> >CTX_ID:4a654305-d2e4-
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19,
>>> >>> >>> >> >> >>>> gfid:
be318638-e8a0-4c6d-977d-7a937aa84806,
>>> >>> >>> >> >> >>>>
req(uid:36,gid:36,perm:1,ngrps:3), ctx
>>> >>> >>> >> >> >>>>
>>> >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID,
>>> >>> >acl:-)
>>> >>> >>> >> >> >>>> [Permission
denied]
>>> >>> >>> >> >> >>>>
>gluster_bricks-data_fast4-data_fast4.log:[2020-03-18
>>> >>> >>> >> >> >13:26:50.758178] I
>>> >>> >>> >> >> >>>> [MSGID: 139001]
>>> >>> >[posix-acl.c:262:posix_acl_log_permit_denied]
>>> >>> >>> >> >> >>>>
0-data_fast4-access-control: client:
>>> >>> >CTX_ID:4a654305-d2e4-
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19,
>>> >>> >>> >> >> >>>> gfid:
be318638-e8a0-4c6d-977d-7a937aa84806,
>>> >>> >>> >> >> >>>>
req(uid:36,gid:36,perm:1,ngrps:3), ctx
>>> >>> >>> >> >> >>>>
>>> >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID,
>>> >>> >acl:-)
>>> >>> >>> >> >> >>>> [Permission
denied]
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> In my case , the
workaround was to downgrade the
>>> >>gluster
>>> >>> >>> >> >packages
>>> >>> >>> >> >> >on all
>>> >>> >>> >> >> >>>> nodes (and
reboot each node 1 by 1 ) if the major
>>> >>version
>>> >>> >is
>>> >>> >>> >the
>>> >>> >>> >> >> >same, but
>>> >>> >>> >> >> >>>> if you upgraded
to v7.X - then you can try the
>v7.0 .
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> Best Regards,
>>> >>> >>> >> >> >>>> Strahil Nikolov
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> В събота, 20 юни
2020 г., 18:48:42 ч. Гринуич+3,
>C
>>> >>> >Williams <
>>> >>> >>> >> >> >>>>
cwilliams3320(a)gmail.com> написа:
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> Hello,
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> Here are
additional log tiles as well as a tree
>of
>>> >the
>>> >>> >>> >> >problematic
>>> >>> >>> >> >> >>>> Gluster storage
domain. During this time I
>attempted
>>> >>to
>>> >>> >copy
>>> >>> >>> >a
>>> >>> >>> >> >> >virtual disk
>>> >>> >>> >> >> >>>> to another
domain, move a virtual disk to another
>>> >>domain
>>> >>> >and
>>> >>> >>> >run
>>> >>> >>> >> >a
>>> >>> >>> >> >> >VM where
>>> >>> >>> >> >> >>>> the virtual hard
disk would be used.
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> The copies/moves
failed and the VM went into
>pause
>>> >>mode
>>> >>> >when
>>> >>> >>> >the
>>> >>> >>> >> >> >virtual
>>> >>> >>> >> >> >>>> HDD was
involved.
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> Please check
these out.
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> Thank You For
Your Help !
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> On Sat, Jun 20,
2020 at 9:54 AM C Williams
>>> >>> >>> >> >>
><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>> wrote:
>>> >>> >>> >> >> >>>> > Strahil,
>>> >>> >>> >> >> >>>> >
>>> >>> >>> >> >> >>>> > I
understand. Please keep me posted.
>>> >>> >>> >> >> >>>> >
>>> >>> >>> >> >> >>>> > Thanks For
The Help !
>>> >>> >>> >> >> >>>> >
>>> >>> >>> >> >> >>>> > On Sat, Jun
20, 2020 at 4:36 AM Strahil Nikolov
>>> >>> >>> >> >>
><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>>> wrote:
>>> >>> >>> >> >> >>>> >> Hey C
Williams,
>>> >>> >>> >> >> >>>> >>
>>> >>> >>> >> >> >>>> >> sorry
for the delay, but I couldn't get somw
>time
>>> >>to
>>> >>> >>> >check
>>> >>> >>> >> >your
>>> >>> >>> >> >> >>>> logs. Will try
a little bit later.
>>> >>> >>> >> >> >>>> >>
>>> >>> >>> >> >> >>>> >> Best
Regards,
>>> >>> >>> >> >> >>>> >> Strahil
Nikolov
>>> >>> >>> >> >> >>>> >>
>>> >>> >>> >> >> >>>> >> На 20
юни 2020 г. 2:37:22 GMT+03:00, C
>Williams <
>>> >>> >>> >> >> >>>>
cwilliams3320(a)gmail.com> написа:
>>> >>> >>> >> >> >>>>
>>>Hello,
>>> >>> >>> >> >> >>>> >>>
>>> >>> >>> >> >> >>>> >>>Was
wanting to follow up on this issue. Users
>are
>>> >>> >>> >impacted.
>>> >>> >>> >> >> >>>> >>>
>>> >>> >>> >> >> >>>>
>>>Thank You
>>> >>> >>> >> >> >>>> >>>
>>> >>> >>> >> >> >>>> >>>On
Fri, Jun 19, 2020 at 9:20 AM C Williams
>>> >>> >>> >> >>
><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>wrote:
>>> >>> >>> >> >> >>>> >>>
>>> >>> >>> >> >> >>>> >>>>
Hello,
>>> >>> >>> >> >> >>>>
>>>>
>>> >>> >>> >> >> >>>> >>>>
Here are the logs (some IPs are changed )
>>> >>> >>> >> >> >>>>
>>>>
>>> >>> >>> >> >> >>>> >>>>
ov05 is the SPM
>>> >>> >>> >> >> >>>>
>>>>
>>> >>> >>> >> >> >>>> >>>>
Thank You For Your Help !
>>> >>> >>> >> >> >>>>
>>>>
>>> >>> >>> >> >> >>>> >>>>
On Thu, Jun 18, 2020 at 11:31 PM Strahil
>Nikolov
>>> >>> >>> >> >> >>>>
>>><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>>> >>>>
wrote:
>>> >>> >>> >> >> >>>>
>>>>
>>> >>> >>> >> >> >>>>
>>>>> Check on the hosts tab , which is your
>current
>>> >>SPM
>>> >>> >>> >(last
>>> >>> >>> >> >> >column in
>>> >>> >>> >> >> >>>>
>>>Admin
>>> >>> >>> >> >> >>>>
>>>>> UI).
>>> >>> >>> >> >> >>>>
>>>>> Then open the /var/log/vdsm/vdsm.log and
>>> >repeat
>>> >>> >the
>>> >>> >>> >> >> >operation.
>>> >>> >>> >> >> >>>>
>>>>> Then provide the log from that host and the
>>> >>> >engine's
>>> >>> >>> >log
>>> >>> >>> >> >(on
>>> >>> >>> >> >> >the
>>> >>> >>> >> >> >>>>
>>>>> HostedEngine VM or on your standalone
>engine).
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>> Best Regards,
>>> >>> >>> >> >> >>>>
>>>>> Strahil Nikolov
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>> На 18 юни 2020 г. 23:59:36 GMT+03:00, C
>>> >Williams
>>> >>> >>> >> >> >>>>
>>><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>>> написа:
>>> >>> >>> >> >> >>>>
>>>>> >Resending to eliminate email issues
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >---------- Forwarded message ---------
>>> >>> >>> >> >> >>>>
>>>>> >From: C Williams <cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>>> >Date: Thu, Jun 18, 2020 at 4:01 PM
>>> >>> >>> >> >> >>>>
>>>>> >Subject: Re: [ovirt-users] Fwd: Issues
>with
>>> >>> >Gluster
>>> >>> >>> >> >Domain
>>> >>> >>> >> >> >>>>
>>>>> >To: Strahil Nikolov
><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >Here is output from mount
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >192.168.24.12:/stor/import0 on
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>>/rhev/data-center/mnt/192.168.24.12:_stor_import0
>>> >>> >>> >> >> >>>>
>>>>> >type nfs4
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12)
>>> >>> >>> >> >> >>>>
>>>>> >192.168.24.13:/stor/import1 on
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>>/rhev/data-center/mnt/192.168.24.13:_stor_import1
>>> >>> >>> >> >> >>>>
>>>>> >type nfs4
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13)
>>> >>> >>> >> >> >>>>
>>>>> >192.168.24.13:/stor/iso1 on
>>> >>> >>> >> >> >>>>
>>>>>
>>/rhev/data-center/mnt/192.168.24.13:_stor_iso1
>>> >>> >>> >> >> >>>>
>>>>> >type nfs4
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13)
>>> >>> >>> >> >> >>>>
>>>>> >192.168.24.13:/stor/export0 on
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>>/rhev/data-center/mnt/192.168.24.13:_stor_export0
>>> >>> >>> >> >> >>>>
>>>>> >type nfs4
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13)
>>> >>> >>> >> >> >>>>
>>>>> >192.168.24.15:/images on
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>/rhev/data-center/mnt/glusterSD/192.168.24.15:_images
>>> >>> >>> >> >> >>>>
>>>>> >type fuse.glusterfs
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)
>>> >>> >>> >> >> >>>>
>>>>> >192.168.24.18:/images3 on
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3
>>> >>> >>> >> >> >>>>
>>>>> >type fuse.glusterfs
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072)
>>> >>> >>> >> >> >>>>
>>>>> >tmpfs on /run/user/0 type tmpfs
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >>
>>>(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700)
>>> >>> >>> >> >> >>>>
>>>>> >[root@ov06 glusterfs]#
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >Also here is a screenshot of the console
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >[image: image.png]
>>> >>> >>> >> >> >>>>
>>>>> >The other domains are up
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >Import0 and Import1 are NFS . GLCL0 is
>>> >gluster.
>>> >>> >They
>>> >>> >>> >all
>>> >>> >>> >> >are
>>> >>> >>> >> >> >>>>
>>>running
>>> >>> >>> >> >> >>>>
>>>>> >VMs
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >Thank You For Your Help !
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >On Thu, Jun 18, 2020 at 3:51 PM Strahil
>>> >Nikolov
>>> >>> >>> >> >> >>>>
>>><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>>>
>>>>> >wrote:
>>> >>> >>> >> >> >>>>
>>>>> >
>>> >>> >>> >> >> >>>>
>>>>> >> I don't see
>>> >>> >>> >> >>
>'/rhev/data-center/mnt/192.168.24.13:_stor_import1'
>>> >>> >>> >> >> >>>>
>>>>> >mounted
>>> >>> >>> >> >> >>>>
>>>>> >> at all .
>>> >>> >>> >> >> >>>>
>>>>> >> What is the status of all storage
>domains ?
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>> >> Best Regards,
>>> >>> >>> >> >> >>>>
>>>>> >> Strahil Nikolov
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C
>>> >>Williams
>>> >>> >>> >> >> >>>>
>>>>> ><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>>> >> написа:
>>> >>> >>> >> >> >>>>
>>>>> >> > Resending to deal with possible email
>>> >>issues
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >---------- Forwarded message ---------
>>> >>> >>> >> >> >>>>
>>>>> >> >From: C Williams
><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>>> >> >Date: Thu, Jun 18, 2020 at 2:07 PM
>>> >>> >>> >> >> >>>>
>>>>> >> >Subject: Re: [ovirt-users] Issues with
>>> >>Gluster
>>> >>> >>> >Domain
>>> >>> >>> >> >> >>>>
>>>>> >> >To: Strahil Nikolov
><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >More
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >[root@ov06 ~]# for i in $(gluster
>volume
>>> >>list);
>>> >>> > do
>>> >>> >>> >> >echo
>>> >>> >>> >> >> >>>>
>>>$i;echo;
>>> >>> >>> >> >> >>>>
>>>>> >> >gluster
>>> >>> >>> >> >> >>>>
>>>>> >> >volume info $i; echo;echo;gluster
>volume
>>> >>status
>>> >>> >>> >> >> >>>>
>>>>> >$i;echo;echo;echo;done
>>> >>> >>> >> >> >>>>
>>>>> >> >images3
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >Volume Name: images3
>>> >>> >>> >> >> >>>>
>>>>> >> >Type: Replicate
>>> >>> >>> >> >> >>>>
>>>>> >> >Volume ID:
>>> >>0243d439-1b29-47d0-ab39-d61c2f15ae8b
>>> >>> >>> >> >> >>>>
>>>>> >> >Status: Started
>>> >>> >>> >> >> >>>>
>>>>> >> >Snapshot Count: 0
>>> >>> >>> >> >> >>>>
>>>>> >> >Number of Bricks: 1 x 3 = 3
>>> >>> >>> >> >> >>>>
>>>>> >> >Transport-type: tcp
>>> >>> >>> >> >> >>>>
>>>>> >> >Bricks:
>>> >>> >>> >> >> >>>>
>>>>> >> >Brick1:
>>> >>192.168.24.18:/bricks/brick04/images3
>>> >>> >>> >> >> >>>>
>>>>> >> >Brick2:
>>> >>192.168.24.19:/bricks/brick05/images3
>>> >>> >>> >> >> >>>>
>>>>> >> >Brick3:
>>> >>192.168.24.20:/bricks/brick06/images3
>>> >>> >>> >> >> >>>>
>>>>> >> >Options Reconfigured:
>>> >>> >>> >> >> >>>>
>>>>> >> >performance.client-io-threads: on
>>> >>> >>> >> >> >>>>
>>>>> >> >nfs.disable: on
>>> >>> >>> >> >> >>>>
>>>>> >> >transport.address-family: inet
>>> >>> >>> >> >> >>>>
>>>>> >> >user.cifs: off
>>> >>> >>> >> >> >>>>
>>>>> >> >auth.allow: *
>>> >>> >>> >> >> >>>>
>>>>> >> >performance.quick-read: off
>>> >>> >>> >> >> >>>>
>>>>> >> >performance.read-ahead: off
>>> >>> >>> >> >> >>>>
>>>>> >> >performance.io-cache: off
>>> >>> >>> >> >> >>>>
>>>>> >> >performance.low-prio-threads: 32
>>> >>> >>> >> >> >>>>
>>>>> >> >network.remote-dio: off
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.eager-lock: enable
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.quorum-type: auto
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.server-quorum-type: server
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.data-self-heal-algorithm: full
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.locking-scheme: granular
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.shd-max-threads: 8
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.shd-wait-qlength: 10000
>>> >>> >>> >> >> >>>>
>>>>> >> >features.shard: on
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.choose-local: off
>>> >>> >>> >> >> >>>>
>>>>> >> >client.event-threads: 4
>>> >>> >>> >> >> >>>>
>>>>> >> >server.event-threads: 4
>>> >>> >>> >> >> >>>>
>>>>> >> >storage.owner-uid: 36
>>> >>> >>> >> >> >>>>
>>>>> >> >storage.owner-gid: 36
>>> >>> >>> >> >> >>>>
>>>>> >> >performance.strict-o-direct: on
>>> >>> >>> >> >> >>>>
>>>>> >> >network.ping-timeout: 30
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.granular-entry-heal: enable
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >Status of volume: images3
>>> >>> >>> >> >> >>>>
>>>>> >> >Gluster process
>>> >>TCP
>>> >>> >>> >Port
>>> >>> >>> >> >> >RDMA Port
>>> >>> >>> >> >> >>>>
>>>>> >Online
>>> >>> >>> >> >> >>>>
>>>>> >> > Pid
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>>------------------------------------------------------------------------------
>>> >>> >>> >> >> >>>>
>>>>> >> >Brick
>192.168.24.18:/bricks/brick04/images3
>>> >>> >49152
>>> >>> >>> >> >0
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> >>>Y
>>> >>> >>> >> >> >>>>
>>>>> >> >6666
>>> >>> >>> >> >> >>>>
>>>>> >> >Brick
>192.168.24.19:/bricks/brick05/images3
>>> >>> >49152
>>> >>> >>> >> >0
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> >>>Y
>>> >>> >>> >> >> >>>>
>>>>> >> >6779
>>> >>> >>> >> >> >>>>
>>>>> >> >Brick
>192.168.24.20:/bricks/brick06/images3
>>> >>> >49152
>>> >>> >>> >> >0
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> >>>Y
>>> >>> >>> >> >> >>>>
>>>>> >> >7227
>>> >>> >>> >> >> >>>>
>>>>> >> >Self-heal Daemon on localhost
>>> >>N/A
>>> >>> >>> >> >N/A
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> >>>Y
>>> >>> >>> >> >> >>>>
>>>>> >> >6689
>>> >>> >>> >> >> >>>>
>>>>> >> >Self-heal Daemon on ov07.ntc.srcle.com
>>> >>N/A
>>> >>> >>> >> >N/A
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> >>>Y
>>> >>> >>> >> >> >>>>
>>>>> >> >6802
>>> >>> >>> >> >> >>>>
>>>>> >> >Self-heal Daemon on ov08.ntc.srcle.com
>>> >>N/A
>>> >>> >>> >> >N/A
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>> >>>Y
>>> >>> >>> >> >> >>>>
>>>>> >> >7250
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >Task Status of Volume images3
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>>------------------------------------------------------------------------------
>>> >>> >>> >> >> >>>>
>>>>> >> >There are no active volume tasks
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >[root@ov06 ~]# ls -l
>>> >>> >>> >/rhev/data-center/mnt/glusterSD/
>>> >>> >>> >> >> >>>>
>>>>> >> >total 16
>>> >>> >>> >> >> >>>>
>>>>> >> >drwxr-xr-x. 5 vdsm kvm 8192 Jun 18
>14:04
>>> >>> >>> >> >> >192.168.24.15:_images
>>> >>> >>> >> >> >>>>
>>>>> >> >drwxr-xr-x. 5 vdsm kvm 8192 Jun 18
>14:05
>>> >>> >>> >> >192.168.24.18:
>>> >>> >>> >> >> >>>> _images3
>>> >>> >>> >> >> >>>>
>>>>> >> >[root@ov06 ~]#
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >On Thu, Jun 18, 2020 at 2:03 PM C
>Williams
>>> >>> >>> >> >> >>>>
>>><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>>> >> >wrote:
>>> >>> >>> >> >> >>>>
>>>>> >> >
>>> >>> >>> >> >> >>>>
>>>>> >> >> Strahil,
>>> >>> >>> >> >> >>>>
>>>>> >> >>
>>> >>> >>> >> >> >>>>
>>>>> >> >> Here you go -- Thank You For Your
>Help !
>>> >>> >>> >> >> >>>>
>>>>> >> >>
>>> >>> >>> >> >> >>>>
>>>>> >> >> BTW -- I can write a test file to
>gluster
>>> >>and
>>> >>> >it
>>> >>> >>> >> >> >replicates
>>> >>> >>> >> >> >>>>
>>>>> >properly.
>>> >>> >>> >> >> >>>>
>>>>> >> >> Thinking something about the oVirt
>>> >Storage
>>> >>> >Domain
>>> >>> >>> >?
>>> >>> >>> >> >> >>>>
>>>>> >> >>
>>> >>> >>> >> >> >>>>
>>>>> >> >> [root@ov08 ~]# gluster pool list
>>> >>> >>> >> >> >>>>
>>>>> >> >> UUID
>>> >>> >Hostname
>>> >>> >>> >> >> >>>>
>>>>> >State
>>> >>> >>> >> >> >>>>
>>>>> >> >> 5b40c659-d9ab-43c3-9af8-18b074ea0b83
>>> >>ov06
>>> >>> >>> >> >> >>>>
>>>>> >> >Connected
>>> >>> >>> >> >> >>>>
>>>>> >> >> 36ce5a00-6f65-4926-8438-696944ebadb5
>>> >>> >>> >> >> >ov07.ntc.srcle.com
>>> >>> >>> >> >> >>>>
>>>>> >> >Connected
>>> >>> >>> >> >> >>>>
>>>>> >> >> c7e7abdb-a8f4-4842-924c-e227f0db1b29
>>> >>> >localhost
>>> >>> >>> >> >> >>>>
>>>>> >> >Connected
>>> >>> >>> >> >> >>>>
>>>>> >> >> [root@ov08 ~]# gluster volume list
>>> >>> >>> >> >> >>>>
>>>>> >> >> images3
>>> >>> >>> >> >> >>>>
>>>>> >> >>
>>> >>> >>> >> >> >>>>
>>>>> >> >> On Thu, Jun 18, 2020 at 1:13 PM
>Strahil
>>> >>> >Nikolov
>>> >>> >>> >> >> >>>>
>>>>> >> ><hunter86_bg(a)yahoo.com>
>>> >>> >>> >> >> >>>>
>>>>> >> >> wrote:
>>> >>> >>> >> >> >>>>
>>>>> >> >>
>>> >>> >>> >> >> >>>>
>>>>> >> >>> Log to the oVirt cluster and provide
>the
>>> >>> >output
>>> >>> >>> >of:
>>> >>> >>> >> >> >>>>
>>>>> >> >>> gluster pool list
>>> >>> >>> >> >> >>>>
>>>>> >> >>> gluster volume list
>>> >>> >>> >> >> >>>>
>>>>> >> >>> for i in $(gluster volume list); do
>>> >>echo
>>> >>> >>> >$i;echo;
>>> >>> >>> >> >> >gluster
>>> >>> >>> >> >> >>>>
>>>>> >volume
>>> >>> >>> >> >> >>>>
>>>>> >> >info
>>> >>> >>> >> >> >>>>
>>>>> >> >>> $i; echo;echo;gluster volume status
>>> >>> >>> >> >> >$i;echo;echo;echo;done
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >> >>> ls -l
>/rhev/data-center/mnt/glusterSD/
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >> >>> Best Regards,
>>> >>> >>> >> >> >>>>
>>>>> >> >>> Strahil Nikolov
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >> >>> На 18 юни 2020 г. 19:17:46
>GMT+03:00, C
>>> >>> >Williams
>>> >>> >>> >> >> >>>>
>>>>> >> ><cwilliams3320(a)gmail.com>
>>> >>> >>> >> >> >>>>
>>>>> >> >>> написа:
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Hello,
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >I recently added 6 hosts to an
>existing
>>> >>> >oVirt
>>> >>> >>> >> >> >>>>
>>>compute/gluster
>>> >>> >>> >> >> >>>>
>>>>> >> >cluster.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Prior to this attempted addition,
>my
>>> >>> >cluster
>>> >>> >>> >had 3
>>> >>> >>> >> >> >>>>
>>>Hypervisor
>>> >>> >>> >> >> >>>>
>>>>> >hosts
>>> >>> >>> >> >> >>>>
>>>>> >> >and
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >3
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >gluster bricks which made up a
>single
>>> >>> >gluster
>>> >>> >>> >> >volume
>>> >>> >>> >> >> >>>>
>>>(replica 3
>>> >>> >>> >> >> >>>>
>>>>> >> >volume)
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >. I
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >added the additional hosts and made
>a
>>> >>brick
>>> >>> >on
>>> >>> >>> >3
>>> >>> >>> >> >of
>>> >>> >>> >> >> >the new
>>> >>> >>> >> >> >>>>
>>>>> >hosts
>>> >>> >>> >> >> >>>>
>>>>> >> >and
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >attempted to make a new replica 3
>>> >>volume. I
>>> >>> >had
>>> >>> >>> >> >> >difficulty
>>> >>> >>> >> >> >>>>
>>>>> >> >creating
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >the
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >new volume. So, I decided that I
>would
>>> >>make
>>> >>> >a
>>> >>> >>> >new
>>> >>> >>> >> >> >>>>
>>>>> >compute/gluster
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >cluster
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >for each set of 3 new hosts.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >I removed the 6 new hosts from the
>>> >>existing
>>> >>> >>> >oVirt
>>> >>> >>> >> >> >>>>
>>>>> >Compute/Gluster
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Cluster
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >leaving the 3 original hosts in
>place
>>> >>with
>>> >>> >>> >their
>>> >>> >>> >> >> >bricks. At
>>> >>> >>> >> >> >>>>
>>>that
>>> >>> >>> >> >> >>>>
>>>>> >> >point
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >my
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >original bricks went down and came
>back
>>> >>up
>>> >>> >.
>>> >>> >>> >The
>>> >>> >>> >> >> >volume
>>> >>> >>> >> >> >>>>
>>>showed
>>> >>> >>> >> >> >>>>
>>>>> >> >entries
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >that
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >needed healing. At that point I ran
>>> >>gluster
>>> >>> >>> >volume
>>> >>> >>> >> >> >heal
>>> >>> >>> >> >> >>>>
>>>images3
>>> >>> >>> >> >> >>>>
>>>>> >> >full,
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >etc.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >The volume shows no unhealed
>entries. I
>>> >>> >also
>>> >>> >>> >> >> >corrected some
>>> >>> >>> >> >> >>>>
>>>peer
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >errors.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >However, I am unable to copy disks,
>>> >move
>>> >>> >disks
>>> >>> >>> >to
>>> >>> >>> >> >> >another
>>> >>> >>> >> >> >>>>
>>>>> >domain,
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >export
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >disks, etc. It appears that the
>engine
>>> >>> >cannot
>>> >>> >>> >> >locate
>>> >>> >>> >> >> >disks
>>> >>> >>> >> >> >>>>
>>>>> >properly
>>> >>> >>> >> >> >>>>
>>>>> >> >and
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >I
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >get storage I/O errors.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >I have detached and removed the
>oVirt
>>> >>> >Storage
>>> >>> >>> >> >Domain.
>>> >>> >>> >> >> >I
>>> >>> >>> >> >> >>>>
>>>>> >reimported
>>> >>> >>> >> >> >>>>
>>>>> >> >the
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >domain and imported 2 VMs, But the
>VM
>>> >>disks
>>> >>> >>> >> >exhibit
>>> >>> >>> >> >> >the
>>> >>> >>> >> >> >>>> same
>>> >>> >>> >> >> >>>>
>>>>> >> >behaviour
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >and
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >won't run from the hard disk.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >I get errors such as this
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >VDSM ov05 command
>>> >>HSMGetAllTasksStatusesVDS
>>> >>> >>> >> >failed:
>>> >>> >>> >> >> >low
>>> >>> >>> >> >> >>>>
>>>level
>>> >>> >>> >> >> >>>>
>>>>> >Image
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >copy
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >failed: ("Command
>['/usr/bin/qemu-img',
>>> >>> >>> >'convert',
>>> >>> >>> >> >> >'-p',
>>> >>> >>> >> >> >>>>
>>>'-t',
>>> >>> >>> >> >> >>>>
>>>>> >> >'none',
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >'-T', 'none', '-f',
'raw',
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>>
>>u'/rhev/data-center/mnt/glusterSD/192.168.24.18:
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>>_images3/5fe3ad3f-2d21-404c-832e-4dc7318ca10d/images/3ea5afbd-0fe0-4c09-8d39-e556c66a8b3d/fe6eab63-3b22-4815-bfe6-4a0ade292510',
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >'-O', 'raw',
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>u'/rhev/data-center/mnt/192.168.24.13:
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>>
>>> >>>
>>> >>>
>>>
>>>
>>>>>>>>>>>>_stor_import1/1ab89386-a2ba-448b-90ab-bc816f55a328/images/f707a218-9db7-4e23-8bbd-9b12972012b6/d6591ec5-3ede-443d-bd40-93119ca7c7d5']
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >failed with rc=1 out=''
>>> >>> >>> >err=bytearray(b'qemu-img:
>>> >>> >>> >> >> >error
>>> >>> >>> >> >> >>>>
>>>while
>>> >>> >>> >> >> >>>>
>>>>> >> >reading
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >sector 135168: Transport endpoint
>is
>>> >not
>>> >>> >>> >> >> >>>>
>>>connected\\nqemu-img:
>>> >>> >>> >> >> >>>>
>>>>> >> >error
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >while
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >reading sector 131072: Transport
>>> >>endpoint
>>> >>> >is
>>> >>> >>> >not
>>> >>> >>> >> >> >>>>
>>>>> >> >connected\\nqemu-img:
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >error while reading sector 139264:
>>> >>> >Transport
>>> >>> >>> >> >endpoint
>>> >>> >>> >> >> >is
>>> >>> >>> >> >> >>>> not
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >connected\\nqemu-img: error while
>>> >>reading
>>> >>> >>> >sector
>>> >>> >>> >> >> >143360:
>>> >>> >>> >> >> >>>>
>>>>> >Transport
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >endpoint
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >is not connected\\nqemu-img: error
>>> >while
>>> >>> >>> >reading
>>> >>> >>> >> >> >sector
>>> >>> >>> >> >> >>>>
>>>147456:
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Transport
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >endpoint is not
>connected\\nqemu-img:
>>> >>error
>>> >>> >>> >while
>>> >>> >>> >> >> >reading
>>> >>> >>> >> >> >>>>
>>>sector
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >155648:
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Transport endpoint is not
>>> >>> >connected\\nqemu-img:
>>> >>> >>> >> >error
>>> >>> >>> >> >> >while
>>> >>> >>> >> >> >>>>
>>>>> >reading
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >sector
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >151552: Transport endpoint is not
>>> >>> >>> >> >> >connected\\nqemu-img:
>>> >>> >>> >> >> >>>>
>>>error
>>> >>> >>> >> >> >>>>
>>>>> >while
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >reading
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >sector 159744: Transport endpoint
>is
>>> >not
>>> >>> >>> >> >> >connected\\n')",)
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >oVirt version is 4.3.82-1.el7
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >OS CentOS Linux release 7.7.1908
>(Core)
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >The Gluster Cluster has been
>working
>>> >>very
>>> >>> >well
>>> >>> >>> >> >until
>>> >>> >>> >> >> >this
>>> >>> >>> >> >> >>>>
>>>>> >incident.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Please help.
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Thank You
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >
>>> >>> >>> >> >> >>>>
>>>>> >> >>> >Charles Williams
>>> >>> >>> >> >> >>>>
>>>>> >> >>>
>>> >>> >>> >> >> >>>>
>>>>> >> >>
>>> >>> >>> >> >> >>>>
>>>>> >>
>>> >>> >>> >> >> >>>>
>>>>>
>>> >>> >>> >> >> >>>>
>>>>
>>> >>> >>> >> >> >>>> >>
>>> >>> >>> >> >> >>>> >
>>> >>> >>> >> >> >>>>
_______________________________________________
>>> >>> >>> >> >> >>>> Users mailing
list -- users(a)ovirt.org
>>> >>> >>> >> >> >>>> To unsubscribe
send an email to
>users-leave(a)ovirt.org
>>> >>> >>> >> >> >>>> Privacy
Statement:
>>> >>> >https://www.ovirt.org/privacy-policy.html
>>> >>> >>> >> >> >>>> oVirt Code of
Conduct:
>>> >>> >>> >> >> >>>>
>>> >>> >https://www.ovirt.org/community/about/community-guidelines/
>>> >>> >>> >> >> >>>> List Archives:
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >
>>> >>> >>> >> >>
>>> >>> >>> >> >
>>> >>> >>> >>
>>> >>> >>> >
>>> >>> >>>
>>> >>> >
>>> >>>
>>> >>
>>> >
>>>
>https://lists.ovirt.org/archives/list/users@ovirt.org/message/YY3VUKEJLI7MRWXF627EHQAMH36UJ5BQ/
>>> >>> >>> >> >> >>>>
>>> >>> >>> >> >> >>>
>>> >>> >>> >> >>
>>> >>> >>> >>
>>> >>> >>>
>>> >>> >>
>>> >>>
>>>
>>