10:36 a.m.
Hi
I keep losing ib0 connection on hypervisor after adding host to engine.
This makes the host not really work since NFS will be mounted over ib0.
I don't really understand why this occurs.
OS:
[root@ovirt-hv2 ~]# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)
Here's the network script:
[root@ovirt-hv2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-ib0
DEVICE=ib0
BOOTPROTO=static
IPADDR=172.16.0.207
NETMASK=255.255.255.0
ONBOOT=yes
ZONE=public
When I try "ifup"
[root@ovirt-hv2 ~]# ifup ib0
Error: Connection activation failed: No suitable device found for this
connection.
The error in syslog:
Aug 22 11:31:50 ovirt-hv2 kernel: IPv4: martian source 172.16.0.87 from
172.16.0.49, on dev ib0
Aug 22 11:31:53 ovirt-hv2 NetworkManager[1070]: <info> [1534951913.7486]
audit: op="connection-activate"
uuid="2ab4abde-b8a5-6cbc-19b1-2bfb193e4e89"
name="System ib0" result="fail" reason="No suitable device found
for this
connection.
As you can see media state up:
[root@ovirt-hv2 ~]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master
ovirtmgmt state UP group default qlen 1000
link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
3: em2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 50:9a:4c:89:d3:82 brd ff:ff:ff:ff:ff:ff
4: p1p1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether b4:96:91:13:ea:68 brd ff:ff:ff:ff:ff:ff
5: p1p2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether b4:96:91:13:ea:6a brd ff:ff:ff:ff:ff:ff
6: idrac: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UNKNOWN group default qlen 1000
link/ether 50:9a:4c:89:d3:84 brd ff:ff:ff:ff:ff:ff
inet 169.254.0.2/16 brd 169.254.255.255 scope global idrac
valid_lft forever preferred_lft forever
7: ib0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 2044 qdisc mq state UP group
default qlen 256
link/infiniband
a0:00:02:08:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:1d:13:41 brd
00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
8: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 12:b4:30:22:39:5b brd ff:ff:ff:ff:ff:ff
9: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 3e:32:e6:66:98:49 brd ff:ff:ff:ff:ff:ff
25: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP group default qlen 1000
link/ether 50:9a:4c:89:d3:81 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.183/16 brd 10.0.255.255 scope global ovirtmgmt
valid_lft forever preferred_lft forever
26: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc
noqueue master ovs-system state UNKNOWN group default qlen 1000
link/ether aa:32:82:1b:01:d9 brd ff:ff:ff:ff:ff:ff
27: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group
default qlen 1000
link/ether 32:ff:5d:b8:c2:b4 brd ff:ff:ff:ff:ff:ff
The card is FDR:
[root@ovirt-hv2 ~]# lspci -v | grep Mellanox
01:00.0 Network controller: Mellanox Technologies MT27500 Family
[ConnectX-3]
Subsystem: Mellanox Technologies Device 0051
Latest OFED driver:
[root@ovirt-hv2 ~]# /etc/init.d/openibd status
HCA driver loaded
Configured IPoIB devices:
ib0
Currently active IPoIB devices:
ib0
Configured Mellanox EN devices:
Currently active Mellanox devices:
ib0
The following OFED modules are loaded:
rdma_ucm
rdma_cm
ib_ipoib
mlx4_core
mlx4_ib
mlx4_en
mlx5_core
mlx5_ib
ib_uverbs
ib_umad
ib_ucm
ib_cm
ib_core
mlxfw
mlx5_fpga_tools
I can add an IP to ib0 using "ip addr" though I need Network Manager to
work with ib0.
Thanks,
Douglas Duckworth, MSc, LFCS
HPC System Administrator
Scientific Computing Unit
Weill Cornell Medicine
1300 York - LC-502
E: doug(a)med.cornell.edu
O: 212-746-6305
F: 212-746-8690