4:57 a.m.
How is your mgmt network working... You have no vlan tag on it.... If your
switch port is setup for trunk mode?
I have a Cisco switch that when in trunk mode will not pass untagged
traffic.
The mgmt network and hosting network are on the same interface.
One tagged one not
I would try putting a machine on the mgmt network and see if traffic flows
as it should. This is not outside ovirt capability set, we just have to
narrow down where traffic is not flowing
:)
Up until about 3 months ago I used ovirt to host a public IaaS, included in
my setup was several vlan tagged networks. The community is for help,
welcome to open source.
Donny D
On Jun 30, 2015 9:46 PM, "Donny Davis" <donny(a)cloudspin.me> wrote:
Does your switch have an IP on that vlan... I would step things out
VM>host>switch>rtr
You have already confirmed VM to host.
I'm going to look at your screens again to make sure I didn't miss anything
On Jun 30, 2015 9:42 PM, "Julián Tete" <danteconrad14(a)gmail.com> wrote:
> Thanks for the explanation :)
>
> I set everything of the VLANs at oVirt, After I put a IP on the Virtual
> Machine. But the Virtual Machine can't reach the gateway, The host can do.
> The Virtual Machine only can reach the host. All the machines of the range
> of net can reach the Virtual Machine.
>
> 2015-06-30 20:36 GMT-05:00 Donny Davis <donny(a)cloudspin.me>:
>
>> I'm asking if your setting the vlan on the VM or at ovirt.
>>
>> More than likely if you are coming from VMware you have the Vlans set at
>> the hypervisor. This does work in ovirt, I am doing it right now
>> On Jun 30, 2015 9:31 PM, "Julián Tete" <danteconrad14(a)gmail.com>
wrote:
>>
>>> Mmmm I'm new in oVirt :(
>>>
>>> VMs Interface is Virtual MachineS Interface or VM Network Interface in
>>> the host ?
>>>
>>> I configured the IP of the VLAN in the host.
>>>
>>> I double check: the NIC of the Host has the VLAN assigned.
>>>
>>> Can you help me ?
>>>
>>> 2015-06-30 20:11 GMT-05:00 Donny Davis <donny(a)cloudspin.me>:
>>>
>>>> Are you configuring the vms interface with the vlan or tagging at the
>>>> host.
>>>> On Jun 30, 2015 7:28 PM, "Julián Tete"
<danteconrad14(a)gmail.com>
>>>> wrote:
>>>>
>>>>> Hi Donny
>>>>>
>>>>> We have HP Switches (HP 5406zl) and they are configurated on trunk
>>>>> mode. (VMware is configurated to use that).
>>>>>
>>>>> Any suggestion ?
>>>>>
>>>>> Thanks for your response.
>>>>>
>>>>> :)
>>>>>
>>>>> 2015-06-30 17:51 GMT-05:00 Donny Davis <donny(a)cloudspin.me>:
>>>>>
>>>>>> Vlans are layer 2, sounds like a tagging problem. Cisco
switches?
>>>>>> The tag sticks to the host bridge, but is being stripped off when
it leaves
>>>>>> the host.... Is your switch in access mode or trunk?
>>>>>> Hi Friends of oVirt
>>>>>>
>>>>>> I'm trying to migrate my company from VMware to oVirt.
>>>>>> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>>>>>> The Virtual Machines in these VLANs, can be reached from the
>>>>>> external IPs from the net range,
>>>>>> but from the Virtual machines only can ping the Host with the
Bridge
>>>>>> and itself, can't reach the gateway. ¿?
>>>>>>
>>>>>> I configured a IP Forwarding in the Host with the virtual
machine,
>>>>>> and nothing changes...
>>>>>>
>>>>>> Any idea ? This is the last duty before embrace oVirt in the
company.
>>>>>>
>>>>>> Look to the VLAN 100 configuration (My desired VM Network):
>>>>>>
>>>>>> http://postimg.org/image/7hrog0a2n/
>>>>>>
>>>>>> http://postimg.org/image/68b40i1vr/
>>>>>>
>>>>>> http://postimg.org/image/lu6mlshgp/
>>>>>>
>>>>>> http://postimg.org/image/540o1qc0t/
>>>>>>
>>>>>> http://postimg.org/image/4kyg787bt/
>>>>>>
>>>>>> http://postimg.org/image/v7ralh7zb/
>>>>>>
>>>>>> http://postimg.org/image/kn903cl03/
>>>>>>
>>>>>> For any idea, thanks in advance
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users(a)ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>>>>
>>>>>
>>>
>