4:52 p.m.
So I got ovirtmgmt VM ticked off. Had to remove it from all VM's then tried
to add new Logical network to eth0 by drag & drop but refused since
ovirtmgmt was out of sync. So I synced it. ....and that's how I lost access
to my hosted remote system. End of story. So that's it I guess, automated
install doesn't work (during switch network goes dead and doesn't come back
remote access is lost) so I found manual way that works. But then I need to
sync it to get my ovirtmgmt not to be a VM network. And even if its not to
get another network on the interface i need to sync it.....
I will keep trying, Thanks for the tips.
P.
On 17 January 2014 22:06, Itamar Heim <iheim(a)redhat.com> wrote:
On 01/18/2014 12:05 AM, William Kwan wrote:
> I tried to define a virtual interface for vlan102, by
> adding ifcfg-bond0.102
> manually and restarted network services.
>
why not via ovirt-engine?
>
>
>
> On Friday, January 17, 2014 4:45 PM, Itamar Heim <iheim(a)redhat.com>
> wrote:
> On 01/17/2014 11:38 PM, William Kwan wrote:
> > OK.. tested with bond0.102 for vlan102
> > I guess I can't do this with oVirt? It wouldn't pickup this
interface.
> > It still shows up eth0, eth1 and bond0 only
>
> you tried to define a vlan youself on the bond, or use a vlan via a
> logical network over the bond via ovirt-engine (which should work)?
>
>
> >
> > Will
> >
> >
> >
> > On Friday, January 17, 2014 1:15 PM, William Kwan <potatok(a)yahoo.com
> <mailto:potatok@yahoo.com>> wrote:
> > Thanks all for the info. I'm trying the suggestions with 3.3.2-1.el6
> >
> > Assaf mentioned the following which is true.
> > You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then
> place
> > as many VM, tagged networks as you'd like on the same NIC or bond.
> >
> > I tried a few things and I haven't been able to find a way through.
> > Obviously or not, there are more facts/rules. Just put up a few of
> them
> > here
> >
> > Cannot have more than one non-VLAN network on one interface
> > Cannot have a non-VLAN VM network and VLAN-tagged networks on one
> > interface. ( got this when I tried to drag a VLAN-tagged VM network on
> > the same interface as the non-VLAN VM network).
> >
> > I'll try to test adding a bond0.<vlan>. I need to have
> > bond0 - for both mgmt network and a vlan
> > bond1 - for another subnet.
> >
> > Will
> >
> >
> >
> >
> > On Thursday, January 16, 2014 1:50 PM, Juan Pablo Lorier
> > <jplorier(a)gmail.com <mailto:jplorier@gmail.com>> wrote:
> > Hi William,
> >
> > You can have several logical networks on the same interface. If
> > ovirtmgmt is not a vm network you can even mix tagged and untagged
> > networks (if not, you can't mix). You don's have to do anything
besides
> > creating the logical networks in ovirt and assign them to the
> interface,
> > ovirt takes care of creating the virtual interfaces it needs.
> > What you can't do is have more than one logical network per vlan (I
> > think there's a feature request on this, I know I've asked it on the
> >
> > list:-) ).
> > Regards,
>
> >
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)ovirt.org <mailto:Users@ovirt.org>
> > http://lists.ovirt.org/mailman/listinfo/users
>
> >
>
>
>
>
_______________________________________________
Users mailing list
Users(a)ovirt.org
http://lists.ovirt.org/mailman/listinfo/users