Yeah, you’re right about 400G, I dropped a digit reading it out of your top display.
So what are you seeing in the dashboard, I’m not sure I understand the disconnect between
the top you shared and what you’re seeing there. It shows lots more than 110G in use, I
gather? Or are you seeing this on the hosts page per host mem use?
On Dec 12, 2018, at 12:34 AM, Tony Brian Albers <tba(a)kb.dk>
wrote:
I'm not following you on the 42G available, the way I see it there's
400+G available:
[root@man-001 ~]# free -h
total used free shared buff/cache a
vailable
Mem: 503G 96G 19G 205M 387G
405G
Swap: 4.0G 520K 4.0G
And here's top sorted by %mem usage:
top - 07:29:00 up 104 days, 20:56, 1 user, load average: 0.59, 0.68,
0.67
Tasks: 564 total, 1 running, 563 sleeping, 0 stopped, 0 zombie
%Cpu(s): 1.5 us, 0.2 sy, 0.0 ni, 98.2 id, 0.0 wa, 0.0 hi, 0.0
si, 0.0 st
KiB Mem : 52807689+total, 20085144 free, 10132981+used,
40666195+buff/cache
KiB Swap: 4194300 total, 4193780 free, 520 used. 42491062+avail
Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+
COMMAND
5517 qemu 20 0 9128268 8.1g 14084 S 3.0 1.6 5892:07
qemu-kvm
14187 qemu 20 0 9210236 8.1g 14072 S 5.3 1.6 6586:00
qemu-kvm
12791 qemu 20 0 9272448 8.1g 14140 S 14.2 1.6 17452:10
qemu-kvm
135526 qemu 20 0 9117748 8.1g 13664 S 2.3 1.6 5874:48
qemu-kvm
7938 qemu 20 0 9129936 8.1g 13744 S 2.3 1.6 22109:28
qemu-kvm
11764 qemu 20 0 9275520 8.1g 13720 S 3.3 1.6 10679:25
qemu-kvm
12066 qemu 20 0 9360552 8.1g 13708 S 3.0 1.6 10724:34
qemu-kvm
11153 qemu 20 0 9113544 8.1g 13700 S 15.6 1.6 19050:12
qemu-kvm
12436 qemu 20 0 9161800 8.1g 13712 S 16.2 1.6 21268:00
qemu-kvm
6902 qemu 20 0 9110480 8.0g 13580 S 0.7 1.6 1804:16
qemu-kvm
7621 qemu 20 0 9203816 4.8g 14264 S 1.7 1.0 3143:35
qemu-kvm
6587 qemu 20 0 4880980 4.1g 13744 S 0.7 0.8 2354:56
qemu-kvm
7249 qemu 20 0 4913084 1.6g 13712 S 0.7 0.3 1380:38
qemu-kvm
111877 qemu 20 0 1911088 <tel:1911088> 1.1g 14076 S 0.3 0.2 419:58.70
qemu-kvm
4602 vdsm 0 -20 4803160 <tel:20%204803160> 114184 13860 S 1.3 0.0
2143:44
vdsmd
4058 root 15 -5 1154020 <tel:1154020> 38804 9588 S 0.0 0.0 0:00.81
supervdsmd
818 root 20 0 84576 35356 34940 S 0.0 0.0 1:05.60
systemd-journal
3602 root 20 0 1496796 <tel:1496796> 32536 9232 S 0.0 0.0 123:53.70
python
2672 root 20 0 358328 30228 7984 S 0.0 0.0 0:14.76
firewalld
4801 vdsm 20 0 1640996 <tel:1640996> 28904 5484 S 0.0 0.0 1265:14
python
Rebooting a host doesn't help, (I've tried that earlier) the only thing
that works is to stop all vm's, reboot all hosts at the same time and
start vm's again. Then memory usage shown in the dashboard slowly
increases over time again.
/tony
On Tue, 2018-12-11 at 14:09 -0600, Darrell Budic wrote:
> That’s only reporting 42G available of your 512, ok but something
> still using it. Try sorting the top by memory %, should be ‘>’ while
> it’s running.
>
>> On Dec 11, 2018, at 1:39 AM, Tony Brian Albers <tba(a)kb.dk> wrote:
>>
>> Looks ok to me:
>>
>> top - 08:38:07 up 103 days, 22:05, 1 user, load average: 0.68,
>> 0.62,
>> 0.57
>> Tasks: 565 total, 1 running, 564 sleeping, 0 stopped, 0
>> zombie
>> %Cpu(s): 1.0 us, 0.5 sy, 0.0 ni, 98.5 id, 0.0 wa, 0.0 hi, 0.0
>> si, 0.0 st
>> KiB Mem : 52807689+total, 22355988 free, 10132873+used,
>> 40439219+buff/cache
>> KiB Swap: 4194300 total, 4193780 free, 520 used.
>> 42492028+avail
>> Mem
>>
>> PID USER PR NI VIRT RES SHR S %CPU
>> %MEM TIME+
>> COMMAND
>> 14187 qemu 20 0 9144668 8.1g 14072
>> S 12.6 1.6 6506:46
>> qemu-kvm
>> 11153 qemu 20 0 9244680 8.1g 13700
>> S 4.3 1.6 18881:11
>> qemu-kvm
>> 12436 qemu 20 0 9292936 8.1g 13712
>> S 3.3 1.6 21071:56
>> qemu-kvm
>> 5517 qemu 20 0 9128268 8.1g 14084
>> S 3.0 1.6 5801:03
>> qemu-kvm
>> 11764 qemu 20 0 9185364 8.1g 13720
>> S 3.0 1.6 10585:14
>> qemu-kvm
>> 7938 qemu 20 0 9252876 8.1g 13744
>> S 2.6 1.6 21912:46
>> qemu-kvm
>> 12791 qemu 20 0 9182292 8.1g 14140
>> S 2.6 1.6 17299:36
>> qemu-kvm
>> 4602 vdsm 0 -20 4803160 <tel:20%204803160> <tel:20%204803160
<tel:20%204803160>> 114132 13860
>> S 2.3 0.0 2123:45
>> vdsmd
>> 7621 qemu 20 0 9187424 4.8g 14264
>> S 2.3 1.0 3114:25
>> qemu-kvm
>> 12066 qemu 20 0 9188436 8.1g 13708
>> S 2.3 1.6 10629:53
>> qemu-kvm
>> 135526 qemu 20 0 9298060 8.1g 13664
>> S 2.0 1.6 5792:05
>> qemu-kvm
>> 6587 qemu 20 0 4883036 4.1g 13744
>> S 1.3 0.8 2334:54
>> qemu-kvm
>> 3814 root 20 0 1450200 <tel:1450200> <tel:1450200
<tel:1450200>> 25096 14208
>> S 1.0 0.0 368:03.80
>> libvirtd
>> 6902 qemu 20 0 9110480 8.0g 13580
>> S 1.0 1.6 1787:57
>> qemu-kvm
>> 7249 qemu 20 0 4913084 1.6g 13712
>> S 0.7 0.3 1367:32
>> qemu-kvm
>>
>>
>> It looks like it's only in oVirt-engine that there's an issue. The
>> host
>> seems happy enough.
>>
>> /tony
>>
>>
>>
>> On Mon, 2018-12-10 at 20:14 -0600, Darrell Budic wrote:
>>> Grab a shell on your hosts and check top memory use quick. Could
>>> be
>>> VDSMD, in which case restarting the process will give you a temp
>>> fix.
>>> If you’re running hyperconvered, check your gluster version,
>>> there
>>> was a leak in versions 3.12.7 - 3.1.12 or so, updating
>>> ovirt/gluster
>>> is the best fix for that.
>>>
>>>> On Dec 10, 2018, at 7:36 AM, Tony Brian Albers <tba(a)kb.dk>
>>>> wrote:
>>>>
>>>> Hi guys,
>>>>
>>>> We have a small test installation here running around 30 vms on
>>>> 2
>>>> hosts.
>>>>
>>>> oVirt 4.2.5.3
>>>>
>>>> The hosts each have 512 GB memory, and the vms are sized with
>>>> 4-8
>>>> GB
>>>> each.
>>>>
>>>> I have noticed that over the last months, the memory usage in
>>>> the
>>>> dashboard has been increasing and is now showing 946.8 GB used
>>>> of
>>>> 1007.2 GB.
>>>>
>>>> What can be causing this?
>>>>
>>>> TIA,
>>>>
>>>> --
>>>> --
>>>> Tony Albers
>>>> Systems Architect
>>>> Systems Director, National Cultural Heritage Cluster
>>>> Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C,
>>>> Denmark.
>>>> Tel: +45 2566 2383 / +45 8946 2316
>>>> _______________________________________________
>>>> Users mailing list -- users(a)ovirt.org
>>>> To unsubscribe send an email to users-leave(a)ovirt.org
>>>> Privacy Statement:
https://www.ovirt.org/site/privacy-policy/
>>>> oVirt Code of Conduct:
https://www.ovirt.org/community/about/co
>>>> mmun
>>>> ity-guidelines/
>>>> List Archives:
https://lists.ovirt.org/archives/list/users@ovir
>>>> t.or
>>>> g/message/SDDH2OC5RBOVYYCLGPOUF6HO676HWI5U/
>>>
>>>
>>
>> --
>> Tony Albers
>> Systems Architect
>> Systems Director, National Cultural Heritage Cluster
>> Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark.
>> Tel: +45 2566 2383 <tel:+45%202566%202383> <tel:+45%202566%202383
<tel:+45%202566%202383>> / +45 8946 2316 <tel:+45%208946%202316>
>> <tel:+45%208946%202316 <tel:+45%208946%202316>>
--
--
Tony Albers
Systems Architect
Systems Director, National Cultural Heritage Cluster
Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark.
Tel: +45 2566 2383 <tel:+45%202566%202383> / +45 8946 2316
<tel:+45%208946%202316>