Re: [ovirt-users] [Gluster-users] Gluster command [<UNKNOWN>] failed on server...

Can you replace 'Before=network-online.target' with 'Wants=network-online.target' and try the boot again? This should force the network to be online before starting GlusterD. If even that fails, you could try adding an entry into /etc/hosts with the hostname of the system. This should prevent any more failures. I still don't believe it's a problem with Gluster. Gluster uses apis provided by the system to perform name resolution. These definitely work correctly because you can start GlusterD later. Since the resolution failure only happens during boot, it points to system or network setup issues during boot. To me it seems like the network isn't completely setup at that point of time. ~kaushal On Fri, Dec 5, 2014 at 12:47 PM, Punit Dambiwal <hypunit(a)gmail.com&gt; wrote: > Hi Kaushal, > > It seems it's bug in glusterfs 3.6....even i manage my systemd to start the > network service before glusterd...but it's still fail... > > --------------- > [Unit] > Description=GlusterFS, a clustered file-system server > After=network.target rpcbind.service > Before=network-online.target > > [Service] > Type=forking > PIDFile=/var/run/glusterd.pid > LimitNOFILE=65536 > ExecStartPre=/etc/rc.d/init.d/network start > ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid > KillMode=process > > [Install] > WantedBy=multi-user.target > ---------------- > > Thanks, > Punit > > On Wed, Dec 3, 2014 at 8:56 PM, Kaushal M <kshlmster(a)gmail.com&gt; wrote: >> >> I just remembered this. >> >> There was another user having a similar issue of GlusterD failing to >> start on the mailing list a while back. The cause of his problem was >> the way his network was brought up. >> IIRC, he was using a static network configuration. The problem >> vanished when he began using dhcp. Or it might have been he was using >> dhcp.service and it got solved after switching to NetworkManager. >> >> This could be one more thing you could look at. >> >> I'll try to find the mail thread to see if it was the same problem as you. >> >> ~kaushal >> >> On Wed, Dec 3, 2014 at 6:22 PM, Kaushal M <kshlmster(a)gmail.com&gt; wrote: >> > I don't know much about how the network target is brought up in >> > CentOS7, but I'll try as much as I can. >> > >> > It seems to me that, after the network has been brought up and by the >> > time GlusterD is started, >> > a. The machine hasn't yet recieved it's hostname, or >> > b. It hasn't yet registered with the name server. >> > >> > This is causing name resolution failures. >> > >> > I don't know if the network target could come up without the machine >> > getting its hostname, so I'm pretty sure it's not a. >> > >> > So it seems to be b. But these kind of signing in happens only in DDNS >> > systems, which doesn't seem to be the case for you. >> > >> > Both of these reasons might be wrong (most likely wrong). You'd do >> > good if you could ask for help from someone with more experience in >> > systemd + networking. >> > >> > ~kaushal >> > >> > On Wed, Dec 3, 2014 at 10:54 AM, Punit Dambiwal <hypunit(a)gmail.com&gt; >> > wrote: >> >> Hi Kaushal, >> >> >> >> This is the host...which i rebooted...would you mind to let me know how >> >> i >> >> can make the glusterd sevice come up after network...i am using >> >> centos7...if >> >> network is the issue... >> >> >> >> On Wed, Dec 3, 2014 at 11:54 AM, Kaushal M <kshlmster(a)gmail.com&gt; wrote: >> >>> >> >>> This peer cannot be identified. >> >>> >> >>> " [2014-12-03 02:29:25.998153] D >> >>> [glusterd-peer-utils.c:121:glusterd_peerinfo_find_by_hostname] >> >>> 0-management: >> >>> Unable to find friend: cpu05.zne01.hkg1.ovt.36stack.com" >> >>> >> >>> I don't know why this address is not being resolved during boot time. >> >>> If >> >>> this is a valid peer, the the only reason I can think of this that the >> >>> network is not up. >> >>> >> >>> If you had previously detached the peer forcefully, the that could >> >>> have >> >>> left stale entries in some volumes. In this case as well, GlusterD >> >>> will fail >> >>> to identify the peer. >> >>> >> >>> Do either of these reasons seem a possibility to you? >> >>> >> >>> On Dec 3, 2014 8:07 AM, "Punit Dambiwal" <hypunit(a)gmail.com&gt; wrote: >> >>>> >> >>>> Hi Kaushal, >> >>>> >> >>>> Please find the logs here :- http://ur1.ca/iyoe5 and >> >>>> http://ur1.ca/iyoed >> >>>> >> >>>> On Tue, Dec 2, 2014 at 10:43 PM, Kaushal M <kshlmster(a)gmail.com&gt; >> >>>> wrote: >> >>>>> >> >>>>> Hey Punit, >> >>>>> In the logs you've provided, GlusterD appears to be running >> >>>>> correctly. >> >>>>> Could you provide the logs for the time period when GlusterD >> >>>>> attempts to >> >>>>> start but fails. >> >>>>> >> >>>>> ~kaushal >> >>>>> >> >>>>> On Dec 2, 2014 8:03 PM, "Punit Dambiwal" <hypunit(a)gmail.com&gt; wrote: >> >>>>>> >> >>>>>> Hi Kaushal, >> >>>>>> >> >>>>>> Please find the logs here :- http://ur1.ca/iyhs5 and >> >>>>>> http://ur1.ca/iyhue >> >>>>>> >> >>>>>> Thanks, >> >>>>>> punit >> >>>>>> >> >>>>>> >> >>>>>> On Tue, Dec 2, 2014 at 12:00 PM, Kaushal M <kshlmster(a)gmail.com&gt; >> >>>>>> wrote: >> >>>>>>> >> >>>>>>> Hey Punit, >> >>>>>>> Could you start Glusterd in debug mode and provide the logs here? >> >>>>>>> To start it in debug mode, append '-LDEBUG' to the ExecStart line >> >>>>>>> in >> >>>>>>> the service file. >> >>>>>>> >> >>>>>>> ~kaushal >> >>>>>>> >> >>>>>>> On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal < hypunit(a)gmail.com&gt; >> >>>>>>> wrote: >> >>>>>>> > Hi, >> >>>>>>> > >> >>>>>>> > Can Any body help me on this ?? >> >>>>>>> > >> >>>>>>> > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal >> >>>>>>> > <hypunit(a)gmail.com&gt; >> >>>>>>> > wrote: >> >>>>>>> >> >> >>>>>>> >> Hi Kaushal, >> >>>>>>> >> >> >>>>>>> >> Thanks for the detailed reply....let me explain my setup first >> >>>>>>> >> :- >> >>>>>>> >> >> >>>>>>> >> 1. Ovirt Engine >> >>>>>>> >> 2. 4* host as well as storage machine (Host and gluster >> >>>>>>> >> combined) >> >>>>>>> >> 3. Every host has 24 bricks... >> >>>>>>> >> >> >>>>>>> >> Now whenever the host machine reboot...it can come up but can >> >>>>>>> >> not >> >>>>>>> >> join the >> >>>>>>> >> cluster again and through the following error "Gluster command >> >>>>>>> >> [<UNKNOWN>] >> >>>>>>> >> failed on server.." >> >>>>>>> >> >> >>>>>>> >> Please check my comment in line :- >> >>>>>>> >> >> >>>>>>> >> 1. Use the same string for doing the peer probe and for the >> >>>>>>> >> brick >> >>>>>>> >> address >> >>>>>>> >> during volume create/add-brick. Ideally, we suggest you use >> >>>>>>> >> properly >> >>>>>>> >> resolvable FQDNs everywhere. If that is not possible, then use >> >>>>>>> >> only >> >>>>>>> >> IP >> >>>>>>> >> addresses. Try to avoid short names. >> >>>>>>> >> --------------- >> >>>>>>> >> [root@cpu05 ~]# gluster peer status >> >>>>>>> >> Number of Peers: 3 >> >>>>>>> >> >> >>>>>>> >> Hostname: cpu03.stack.com >> >>>>>>> >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb >> >>>>>>> >> State: Peer in Cluster (Connected) >> >>>>>>> >> >> >>>>>>> >> Hostname: cpu04.stack.com >> >>>>>>> >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0 >> >>>>>>> >> State: Peer in Cluster (Connected) >> >>>>>>> >> Other names: >> >>>>>>> >> 10.10.0.8 >> >>>>>>> >> >> >>>>>>> >> Hostname: cpu02.stack.com >> >>>>>>> >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25 >> >>>>>>> >> State: Peer in Cluster (Connected) >> >>>>>>> >> [root@cpu05 ~]# >> >>>>>>> >> ---------------- >> >>>>>>> >> 2. During boot up, make sure to launch glusterd only after the >> >>>>>>> >> network is >> >>>>>>> >> up. This will allow the new peer identification mechanism to do >> >>>>>>> >> its >> >>>>>>> >> job correctly. >> >>>>>>> >> >> I think the service itself doing the same job.... >> >>>>>>> >> >> >>>>>>> >> [root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service >> >>>>>>> >> [Unit] >> >>>>>>> >> Description=GlusterFS, a clustered file-system server >> >>>>>>> >> After=network.target rpcbind.service >> >>>>>>> >> Before=network-online.target >> >>>>>>> >> >> >>>>>>> >> [Service] >> >>>>>>> >> Type=forking >> >>>>>>> >> PIDFile=/var/run/glusterd.pid >> >>>>>>> >> LimitNOFILE=65536 >> >>>>>>> >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid >> >>>>>>> >> KillMode=process >> >>>>>>> >> >> >>>>>>> >> [Install] >> >>>>>>> >> WantedBy=multi-user.target >> >>>>>>> >> [root@cpu05 ~]# >> >>>>>>> >> -------------------- >> >>>>>>> >> >> >>>>>>> >> gluster logs :- >> >>>>>>> >> >> >>>>>>> >> [2014-11-24 09:22:22.147471] I [MSGID: 100030] >> >>>>>>> >> [glusterfsd.c:2018:main] >> >>>>>>> >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd >> >>>>>>> >> version >> >>>>>>> >> 3.6.1 >> >>>>>>> >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid) >> >>>>>>> >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] >> >>>>>>> >> 0-management: >> >>>>>>> >> Maximum allowed open file descriptors set to 65536 >> >>>>>>> >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] >> >>>>>>> >> 0-management: >> >>>>>>> >> Using >> >>>>>>> >> /var/lib/glusterd as working directory >> >>>>>>> >> [2014-11-24 09:22:22.155216] W >> >>>>>>> >> [rdma.c:4195:__gf_rdma_ctx_create] >> >>>>>>> >> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No >> >>>>>>> >> such device) >> >>>>>>> >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] >> >>>>>>> >> 0-rdma.management: >> >>>>>>> >> Failed to initialize IB Device >> >>>>>>> >> [2014-11-24 09:22:22.155285] E >> >>>>>>> >> [rpc-transport.c:333:rpc_transport_load] >> >>>>>>> >> 0-rpc-transport: 'rdma' initialization failed >> >>>>>>> >> [2014-11-24 09:22:22.155354] W >> >>>>>>> >> [rpcsvc.c:1524:rpcsvc_transport_create] >> >>>>>>> >> 0-rpc-service: cannot create listener, initing the transport >> >>>>>>> >> failed >> >>>>>>> >> [2014-11-24 09:22:22.156290] I >> >>>>>>> >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: >> >>>>>>> >> geo-replication >> >>>>>>> >> module not installed in the system >> >>>>>>> >> [2014-11-24 09:22:22.161318] I >> >>>>>>> >> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: >> >>>>>>> >> retrieved >> >>>>>>> >> op-version: 30600 >> >>>>>>> >> [2014-11-24 09:22:22.821800] I >> >>>>>>> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] >> >>>>>>> >> 0-management: >> >>>>>>> >> connect returned 0 >> >>>>>>> >> [2014-11-24 09:22:22.825810] I >> >>>>>>> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] >> >>>>>>> >> 0-management: >> >>>>>>> >> connect returned 0 >> >>>>>>> >> [2014-11-24 09:22:22.828705] I >> >>>>>>> >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] >> >>>>>>> >> 0-management: >> >>>>>>> >> connect returned 0 >> >>>>>>> >> [2014-11-24 09:22:22.828771] I >> >>>>>>> >> [rpc-clnt.c:969:rpc_clnt_connection_init] >> >>>>>>> >> 0-management: setting frame-timeout to 600 >> >>>>>>> >> [2014-11-24 09:22:22.832670] I >> >>>>>>> >> [rpc-clnt.c:969:rpc_clnt_connection_init] >> >>>>>>> >> 0-management: setting frame-timeout to 600 >> >>>>>>> >> [2014-11-24 09:22:22.835919] I >> >>>>>>> >> [rpc-clnt.c:969:rpc_clnt_connection_init] >> >>>>>>> >> 0-management: setting frame-timeout to 600 >> >>>>>>> >> [2014-11-24 09:22:22.840209] E >> >>>>>>> >> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: >> >>>>>>> >> resolve >> >>>>>>> >> brick failed in restore >> >>>>>>> >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] >> >>>>>>> >> 0-management: >> >>>>>>> >> Initialization of volume 'management' failed, review your >> >>>>>>> >> volfile >> >>>>>>> >> again >> >>>>>>> >> [2014-11-24 09:22:22.840245] E >> >>>>>>> >> [graph.c:322:glusterfs_graph_init] >> >>>>>>> >> 0-management: initializing translator failed >> >>>>>>> >> [2014-11-24 09:22:22.840264] E >> >>>>>>> >> [graph.c:525:glusterfs_graph_activate] >> >>>>>>> >> 0-graph: init failed >> >>>>>>> >> [2014-11-24 09:22:22.840754] W >> >>>>>>> >> [glusterfsd.c:1194:cleanup_and_exit] >> >>>>>>> >> (--> >> >>>>>>> >> 0-: received signum (0), shutting down >> >>>>>>> >> >> >>>>>>> >> Thanks, >> >>>>>>> >> Punit >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M >> >>>>>>> >> <kshlmster(a)gmail.com&gt; >> >>>>>>> >> wrote: >> >>>>>>> >>> >> >>>>>>> >>> Based on the logs I can guess that glusterd is being started >> >>>>>>> >>> before >> >>>>>>> >>> the network has come up and that the addresses given to bricks >> >>>>>>> >>> do >> >>>>>>> >>> not >> >>>>>>> >>> directly match the addresses used in during peer probe. >> >>>>>>> >>> >> >>>>>>> >>> The gluster_after_reboot log has the line "[2014-11-25 >> >>>>>>> >>> 06:46:09.972113] E >> >>>>>>> >>> [glusterd-store.c:2632:glusterd_resolve_all_bricks] >> >>>>>>> >>> 0-glusterd: resolve brick failed in restore". >> >>>>>>> >>> >> >>>>>>> >>> Brick resolution fails when glusterd cannot match the address >> >>>>>>> >>> for >> >>>>>>> >>> the >> >>>>>>> >>> brick, with one of the peers. Brick resolution happens in two >> >>>>>>> >>> phases, >> >>>>>>> >>> 1. We first try to identify the peer by performing string >> >>>>>>> >>> comparisions >> >>>>>>> >>> with the brick address and the peer addresses (The peer names >> >>>>>>> >>> will >> >>>>>>> >>> be >> >>>>>>> >>> the names/addresses that were given when the peer was probed). >> >>>>>>> >>> 2. If we don't find a match from step 1, we will then resolve >> >>>>>>> >>> all >> >>>>>>> >>> the >> >>>>>>> >>> brick address and the peer addresses into addrinfo structs, >> >>>>>>> >>> and >> >>>>>>> >>> then >> >>>>>>> >>> compare these structs to find a match. This process should >> >>>>>>> >>> generally >> >>>>>>> >>> find a match if available. This will fail only if the network >> >>>>>>> >>> is >> >>>>>>> >>> not >> >>>>>>> >>> up yet as we cannot resolve addresses. >> >>>>>>> >>> >> >>>>>>> >>> The above steps are applicable only to glusterfs versions >> >>>>>>> >>> >=3.6. >> >>>>>>> >>> They >> >>>>>>> >>> were introduced to reduce problems with peer identification, >> >>>>>>> >>> like >> >>>>>>> >>> the >> >>>>>>> >>> one you encountered >> >>>>>>> >>> >> >>>>>>> >>> Since both of the steps failed to find a match in one run, but >> >>>>>>> >>> succeeded later, we can come to the conclusion that, >> >>>>>>> >>> a) the bricks don't have the exact same string used in peer >> >>>>>>> >>> probe >> >>>>>>> >>> for >> >>>>>>> >>> their addresses as step 1 failed, and >> >>>>>>> >>> b) the network was not up in the initial run, as step 2 failed >> >>>>>>> >>> during >> >>>>>>> >>> the initial run, but passed in the second run. >> >>>>>>> >>> >> >>>>>>> >>> Please let me know if my conclusion is correct. >> >>>>>>> >>> >> >>>>>>> >>> If it is, you can solve your problem in two ways. >> >>>>>>> >>> 1. Use the same string for doing the peer probe and for the >> >>>>>>> >>> brick >> >>>>>>> >>> address during volume create/add-brick. Ideally, we suggest >> >>>>>>> >>> you >> >>>>>>> >>> use >> >>>>>>> >>> properly resolvable FQDNs everywhere. If that is not possible, >> >>>>>>> >>> then >> >>>>>>> >>> use only IP addresses. Try to avoid short names. >> >>>>>>> >>> 2. During boot up, make sure to launch glusterd only after the >> >>>>>>> >>> network >> >>>>>>> >>> is up. This will allow the new peer identification mechanism >> >>>>>>> >>> to do >> >>>>>>> >>> its >> >>>>>>> >>> job correctly. >> >>>>>>> >>> >> >>>>>>> >>> >> >>>>>>> >>> If you have already followed these steps and yet still hit the >> >>>>>>> >>> problem, then please provide more information (setup, logs, >> >>>>>>> >>> etc.). >> >>>>>>> >>> It >> >>>>>>> >>> could be much different problem that you are facing. >> >>>>>>> >>> >> >>>>>>> >>> ~kaushal >> >>>>>>> >>> >> >>>>>>> >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal >> >>>>>>> >>> <hypunit(a)gmail.com&gt; >> >>>>>>> >>> wrote: >> >>>>>>> >>> > Is there any one can help on this ?? >> >>>>>>> >>> > >> >>>>>>> >>> > Thanks, >> >>>>>>> >>> > punit >> >>>>>>> >>> > >> >>>>>>> >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal >> >>>>>>> >>> > <hypunit(a)gmail.com&gt; >> >>>>>>> >>> > wrote: >> >>>>>>> >>> >> >> >>>>>>> >>> >> Hi, >> >>>>>>> >>> >> >> >>>>>>> >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7 >> >>>>>>> >>> >> >> >>>>>>> >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy >> >>>>>>> >>> >> <kmayilsa(a)redhat.com&gt; >> >>>>>>> >>> >> wrote: >> >>>>>>> >>> >>> >> >>>>>>> >>> >>> [+Gluster-users(a)gluster.org] >> >>>>>>> >>> >>> >> >>>>>>> >>> >>> "Initialization of volume 'management' failed, review your >> >>>>>>> >>> >>> volfile >> >>>>>>> >>> >>> again", glusterd throws this error when the service is >> >>>>>>> >>> >>> started >> >>>>>>> >>> >>> automatically >> >>>>>>> >>> >>> after the reboot. But the service is successfully started >> >>>>>>> >>> >>> later >> >>>>>>> >>> >>> manually by >> >>>>>>> >>> >>> the user. >> >>>>>>> >>> >>> >> >>>>>>> >>> >>> can somebody from gluster-users please help on this? >> >>>>>>> >>> >>> >> >>>>>>> >>> >>> glusterfs version: 3.5.1 >> >>>>>>> >>> >>> >> >>>>>>> >>> >>> Thanks, >> >>>>>>> >>> >>> Kanagaraj >> >>>>>>> >>> >>> >> >>>>>>> >>> >>> ----- Original Message ----- >> >>>>>>> >>> >>> > From: "Punit Dambiwal" <hypunit(a)gmail.com&gt; >> >>>>>>> >>> >>> > To: "Kanagaraj" <kmayilsa(a)redhat.com&gt; >> >>>>>>> >>> >>> > Cc: users(a)ovirt.org >> >>>>>>> >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM >> >>>>>>> >>> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] >> >>>>>>> >>> >>> > failed on >> >>>>>>> >>> >>> > server... >> >>>>>>> >>> >>> > >> >>>>>>> >>> >>> > Hi Kanagraj, >> >>>>>>> >>> >>> > >> >>>>>>> >>> >>> > Please check the attached log files....i didn't find any >> >>>>>>> >>> >>> > thing >> >>>>>>> >>> >>> > special.... >> >>>>>>> >>> >>> > >> >>>>>>> >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj >> >>>>>>> >>> >>> > <kmayilsa(a)redhat.com&gt; >> >>>>>>> >>> >>> > wrote: >> >>>>>>> >>> >>> > >> >>>>>>> >>> >>> > > Do you see any errors in >> >>>>>>> >>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or >> >>>>>>> >>> >>> > > vdsm.log >> >>>>>>> >>> >>> > > when >> >>>>>>> >>> >>> > > the >> >>>>>>> >>> >>> > > service is trying to start automatically after the >> >>>>>>> >>> >>> > > reboot? >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > Thanks, >> >>>>>>> >>> >>> > > Kanagaraj >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote: >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > Hi Kanagaraj, >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > Yes...once i will start the gluster service and then >> >>>>>>> >>> >>> > > vdsmd >> >>>>>>> >>> >>> > > ...the >> >>>>>>> >>> >>> > > host >> >>>>>>> >>> >>> > > can connect to cluster...but the question is why it's >> >>>>>>> >>> >>> > > not >> >>>>>>> >>> >>> > > started >> >>>>>>> >>> >>> > > even it >> >>>>>>> >>> >>> > > has chkconfig enabled... >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > I have tested it in two host cluster >> >>>>>>> >>> >>> > > environment...(Centos 6.6 >> >>>>>>> >>> >>> > > and >> >>>>>>> >>> >>> > > centos 7.0) on both hypervisior cluster..it's failed >> >>>>>>> >>> >>> > > to >> >>>>>>> >>> >>> > > reconnect >> >>>>>>> >>> >>> > > in >> >>>>>>> >>> >>> > > to >> >>>>>>> >>> >>> > > cluster after reboot.... >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > In both the environment glusterd enabled for next >> >>>>>>> >>> >>> > > boot....but >> >>>>>>> >>> >>> > > it's >> >>>>>>> >>> >>> > > failed with the same error....seems it's bug in either >> >>>>>>> >>> >>> > > gluster or >> >>>>>>> >>> >>> > > Ovirt ?? >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > Please help me to find the workaround here if can not >> >>>>>>> >>> >>> > > resolve >> >>>>>>> >>> >>> > > it...as >> >>>>>>> >>> >>> > > without this the Host machine can not connect after >> >>>>>>> >>> >>> > > reboot....that >> >>>>>>> >>> >>> > > means >> >>>>>>> >>> >>> > > engine will consider it as down and every time need to >> >>>>>>> >>> >>> > > manually >> >>>>>>> >>> >>> > > start >> >>>>>>> >>> >>> > > the >> >>>>>>> >>> >>> > > gluster service and vdsmd... ?? >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > Thanks, >> >>>>>>> >>> >>> > > Punit >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj >> >>>>>>> >>> >>> > > <kmayilsa(a)redhat.com&gt; >> >>>>>>> >>> >>> > > wrote: >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > >> From vdsm.log "error: Connection failed. Please >> >>>>>>> >>> >>> > >> check if >> >>>>>>> >>> >>> > >> gluster >> >>>>>>> >>> >>> > >> daemon >> >>>>>>> >>> >>> > >> is operational." >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Starting glusterd service should fix this issue. >> >>>>>>> >>> >>> > >> 'service >> >>>>>>> >>> >>> > >> glusterd >> >>>>>>> >>> >>> > >> start' >> >>>>>>> >>> >>> > >> But i am wondering why the glusterd was not started >> >>>>>>> >>> >>> > >> automatically >> >>>>>>> >>> >>> > >> after >> >>>>>>> >>> >>> > >> the reboot. >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Thanks, >> >>>>>>> >>> >>> > >> Kanagaraj >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote: >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Hi Kanagaraj, >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Please find the attached VDSM logs :- >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> ---------------- >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >> >>>>>>> >>> >>> > >> Owner.cancelAll requests {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref) >> >>>>>>> >>> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 >> >>>>>>> >>> >>> > >> aborting >> >>>>>>> >>> >>> > >> False >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState) >> >>>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving >> >>>>>>> >>> >>> > >> from >> >>>>>>> >>> >>> > >> state >> >>>>>>> >>> >>> > >> init >> >>>>>>> >>> >>> > >> -> >> >>>>>>> >>> >>> > >> state preparing >> >>>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run >> >>>>>>> >>> >>> > >> and >> >>>>>>> >>> >>> > >> protect: >> >>>>>>> >>> >>> > >> repoStats(options=None) >> >>>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run >> >>>>>>> >>> >>> > >> and >> >>>>>>> >>> >>> > >> protect: >> >>>>>>> >>> >>> > >> repoStats, Return response: {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare) >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState) >> >>>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving >> >>>>>>> >>> >>> > >> from >> >>>>>>> >>> >>> > >> state >> >>>>>>> >>> >>> > >> preparing >> >>>>>>> >>> >>> > >> -> >> >>>>>>> >>> >>> > >> state finished >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) >> >>>>>>> >>> >>> > >> Owner.releaseAll requests {} resources {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >> >>>>>>> >>> >>> > >> Owner.cancelAll requests {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref) >> >>>>>>> >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 >> >>>>>>> >>> >>> > >> aborting >> >>>>>>> >>> >>> > >> False >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) >> >>>>>>> >>> >>> > >> client >> >>>>>>> >>> >>> > >> [10.10.10.2]::call >> >>>>>>> >>> >>> > >> getCapabilities with () {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd) >> >>>>>>> >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None) >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd) >> >>>>>>> >>> >>> > >> SUCCESS: <err> = ''; <rc> = 0 >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift-object',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift-plugin',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift-account',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift-proxy',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift-doc',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('gluster-swift-container',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm >> >>>>>>> >>> >>> > >> package >> >>>>>>> >>> >>> > >> ('glusterfs-geo-replication',) not found >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,600::caps::646::root::(get) >> >>>>>>> >>> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 >> >>>>>>> >>> >>> > >> required >> >>>>>>> >>> >>> > >> >= >> >>>>>>> >>> >>> > >> 0.10.2-31 >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) >> >>>>>>> >>> >>> > >> return >> >>>>>>> >>> >>> > >> getCapabilities >> >>>>>>> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, >> >>>>>>> >>> >>> > >> 'info': >> >>>>>>> >>> >>> > >> {'HBAInventory': >> >>>>>>> >>> >>> > >> {'iSCSI': [{'InitiatorName': >> >>>>>>> >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}], >> >>>>>>> >>> >>> > >> 'FC': >> >>>>>>> >>> >>> > >> []}, 'packages2': {'kernel': {'release': >> >>>>>>> >>> >>> > >> '431.el6.x86_64', >> >>>>>>> >>> >>> > >> 'buildtime': >> >>>>>>> >>> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma': >> >>>>>>> >>> >>> > >> {'release': >> >>>>>>> >>> >>> > >> '1.el6', >> >>>>>>> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, >> >>>>>>> >>> >>> > >> 'glusterfs-fuse': >> >>>>>>> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, >> >>>>>>> >>> >>> > >> 'version': >> >>>>>>> >>> >>> > >> '3.5.1'}, >> >>>>>>> >>> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime': >> >>>>>>> >>> >>> > >> 1402324637L, >> >>>>>>> >>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release': >> >>>>>>> >>> >>> > >> '1.gitdb83943.el6', >> >>>>>>> >>> >>> > >> 'buildtime': >> >>>>>>> >>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': >> >>>>>>> >>> >>> > >> {'release': >> >>>>>>> >>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, >> >>>>>>> >>> >>> > >> 'version': >> >>>>>>> >>> >>> > >> '0.12.1.2'}, >> >>>>>>> >>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', >> >>>>>>> >>> >>> > >> 'buildtime': >> >>>>>>> >>> >>> > >> 1402435700L, >> >>>>>>> >>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': >> >>>>>>> >>> >>> > >> '29.el6_5.9', >> >>>>>>> >>> >>> > >> 'buildtime': >> >>>>>>> >>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': >> >>>>>>> >>> >>> > >> {'release': >> >>>>>>> >>> >>> > >> '1.el6', >> >>>>>>> >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom': >> >>>>>>> >>> >>> > >> {'release': >> >>>>>>> >>> >>> > >> '2.el6', >> >>>>>>> >>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'}, >> >>>>>>> >>> >>> > >> 'glusterfs-server': >> >>>>>>> >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, >> >>>>>>> >>> >>> > >> 'version': >> >>>>>>> >>> >>> > >> '3.5.1'}}, >> >>>>>>> >>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]}, >> >>>>>>> >>> >>> > >> 'cpuModel': >> >>>>>>> >>> >>> > >> 'Intel(R) >> >>>>>>> >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': >> >>>>>>> >>> >>> > >> 'false', >> >>>>>>> >>> >>> > >> 'hooks': >> >>>>>>> >>> >>> > >> {}, >> >>>>>>> >>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': >> >>>>>>> >>> >>> > >> {'mode': '1'}, >> >>>>>>> >>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', >> >>>>>>> >>> >>> > >> '2.3'], >> >>>>>>> >>> >>> > >> 'networks': >> >>>>>>> >>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': >> >>>>>>> >>> >>> > >> '43.252.176.16', >> >>>>>>> >>> >>> > >> 'bridged': >> >>>>>>> >>> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', >> >>>>>>> >>> >>> > >> 'ipv4addrs': >> >>>>>>> >>> >>> > >> [' >> >>>>>>> >>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>], >> >>>>>>> >>> >>> > >> 'interface': >> >>>>>>> >>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': >> >>>>>>> >>> >>> > >> '43.25.17.1'}, >> >>>>>>> >>> >>> > >> 'Internal': >> >>>>>>> >>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'BOOTPROTO': >> >>>>>>> >>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': >> >>>>>>> >>> >>> > >> 'Bridge', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs': >> >>>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], >> >>>>>>> >>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', >> >>>>>>> >>> >>> > >> 'stp': >> >>>>>>> >>> >>> > >> 'off', >> >>>>>>> >>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', >> >>>>>>> >>> >>> > >> 'ports': >> >>>>>>> >>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', >> >>>>>>> >>> >>> > >> 'addr': >> >>>>>>> >>> >>> > >> '10.10.10.6', >> >>>>>>> >>> >>> > >> 'bridged': False, 'ipv6addrs': >> >>>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '9000', 'bootproto4': 'none', 'netmask': >> >>>>>>> >>> >>> > >> '255.255.255.0', >> >>>>>>> >>> >>> > >> 'ipv4addrs': [' >> >>>>>>> >>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], >> >>>>>>> >>> >>> > >> 'interface': >> >>>>>>> >>> >>> > >> u'bond1', >> >>>>>>> >>> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': >> >>>>>>> >>> >>> > >> {'iface': >> >>>>>>> >>> >>> > >> 'VMNetwork', >> >>>>>>> >>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'MTU': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': >> >>>>>>> >>> >>> > >> 'none', >> >>>>>>> >>> >>> > >> 'STP': >> >>>>>>> >>> >>> > >> 'off', >> >>>>>>> >>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, >> >>>>>>> >>> >>> > >> 'bridged': >> >>>>>>> >>> >>> > >> True, >> >>>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], >> >>>>>>> >>> >>> > >> 'gateway': >> >>>>>>> >>> >>> > >> '', >> >>>>>>> >>> >>> > >> 'bootproto4': >> >>>>>>> >>> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, >> >>>>>>> >>> >>> > >> 'bridges': >> >>>>>>> >>> >>> > >> {'Internal': >> >>>>>>> >>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'MTU': >> >>>>>>> >>> >>> > >> '9000', >> >>>>>>> >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': >> >>>>>>> >>> >>> > >> 'none', >> >>>>>>> >>> >>> > >> 'STP': >> >>>>>>> >>> >>> > >> 'off', >> >>>>>>> >>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': >> >>>>>>> >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', >> >>>>>>> >>> >>> > >> 'netmask': '', >> >>>>>>> >>> >>> > >> 'stp': >> >>>>>>> >>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', >> >>>>>>> >>> >>> > >> 'gateway': >> >>>>>>> >>> >>> > >> '', >> >>>>>>> >>> >>> > >> 'opts': >> >>>>>>> >>> >>> > >> {'topology_change_detected': '0', >> >>>>>>> >>> >>> > >> 'multicast_last_member_count': >> >>>>>>> >>> >>> > >> '2', >> >>>>>>> >>> >>> > >> 'hash_elasticity': '4', >> >>>>>>> >>> >>> > >> 'multicast_query_response_interval': >> >>>>>>> >>> >>> > >> '999', >> >>>>>>> >>> >>> > >> 'multicast_snooping': '1', >> >>>>>>> >>> >>> > >> 'multicast_startup_query_interval': >> >>>>>>> >>> >>> > >> '3124', >> >>>>>>> >>> >>> > >> 'hello_timer': '31', 'multicast_querier_interval': >> >>>>>>> >>> >>> > >> '25496', >> >>>>>>> >>> >>> > >> 'max_age': >> >>>>>>> >>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', >> >>>>>>> >>> >>> > >> 'root_id': >> >>>>>>> >>> >>> > >> '8000.001018cddaac', 'priority': '32768', >> >>>>>>> >>> >>> > >> 'multicast_membership_interval': >> >>>>>>> >>> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0', >> >>>>>>> >>> >>> > >> 'multicast_querier': >> >>>>>>> >>> >>> > >> '0', >> >>>>>>> >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': >> >>>>>>> >>> >>> > >> '199', >> >>>>>>> >>> >>> > >> 'topology_change': '0', 'bridge_id': >> >>>>>>> >>> >>> > >> '8000.001018cddaac', >> >>>>>>> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', >> >>>>>>> >>> >>> > >> 'gc_timer': >> >>>>>>> >>> >>> > >> '31', >> >>>>>>> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', >> >>>>>>> >>> >>> > >> 'multicast_query_interval': '12498', >> >>>>>>> >>> >>> > >> 'multicast_last_member_interval': >> >>>>>>> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, >> >>>>>>> >>> >>> > >> 'ports': >> >>>>>>> >>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': >> >>>>>>> >>> >>> > >> {'DEFROUTE': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', >> >>>>>>> >>> >>> > >> 'NM_CONTROLLED': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': >> >>>>>>> >>> >>> > >> 'VMNetwork', >> >>>>>>> >>> >>> > >> 'TYPE': >> >>>>>>> >>> >>> > >> 'Bridge', >> >>>>>>> >>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs': >> >>>>>>> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], >> >>>>>>> >>> >>> > >> 'ipv6gateway': >> >>>>>>> >>> >>> > >> '::', >> >>>>>>> >>> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': >> >>>>>>> >>> >>> > >> '0', >> >>>>>>> >>> >>> > >> 'multicast_last_member_count': '2', >> >>>>>>> >>> >>> > >> 'hash_elasticity': >> >>>>>>> >>> >>> > >> '4', >> >>>>>>> >>> >>> > >> 'multicast_query_response_interval': '999', >> >>>>>>> >>> >>> > >> 'multicast_snooping': >> >>>>>>> >>> >>> > >> '1', >> >>>>>>> >>> >>> > >> 'multicast_startup_query_interval': '3124', >> >>>>>>> >>> >>> > >> 'hello_timer': >> >>>>>>> >>> >>> > >> '131', >> >>>>>>> >>> >>> > >> 'multicast_querier_interval': '25496', 'max_age': >> >>>>>>> >>> >>> > >> '1999', >> >>>>>>> >>> >>> > >> 'hash_max': >> >>>>>>> >>> >>> > >> '512', 'stp_state': '0', 'root_id': >> >>>>>>> >>> >>> > >> '8000.60eb6920b46c', >> >>>>>>> >>> >>> > >> 'priority': >> >>>>>>> >>> >>> > >> '32768', 'multicast_membership_interval': '25996', >> >>>>>>> >>> >>> > >> 'root_path_cost': >> >>>>>>> >>> >>> > >> '0', >> >>>>>>> >>> >>> > >> 'root_port': '0', 'multicast_querier': '0', >> >>>>>>> >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': >> >>>>>>> >>> >>> > >> '199', >> >>>>>>> >>> >>> > >> 'topology_change': '0', 'bridge_id': >> >>>>>>> >>> >>> > >> '8000.60eb6920b46c', >> >>>>>>> >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', >> >>>>>>> >>> >>> > >> 'gc_timer': >> >>>>>>> >>> >>> > >> '31', >> >>>>>>> >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', >> >>>>>>> >>> >>> > >> 'multicast_query_interval': '12498', >> >>>>>>> >>> >>> > >> 'multicast_last_member_interval': >> >>>>>>> >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, >> >>>>>>> >>> >>> > >> 'ports': >> >>>>>>> >>> >>> > >> ['bond0.36']}}, 'uuid': >> >>>>>>> >>> >>> > >> '44454C4C-4C00-1057-8053-B7C04F504E31', >> >>>>>>> >>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': >> >>>>>>> >>> >>> > >> {'permhwaddr': >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': >> >>>>>>> >>> >>> > >> 'yes', >> >>>>>>> >>> >>> > >> 'NM_CONTROLLED': >> >>>>>>> >>> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', >> >>>>>>> >>> >>> > >> 'MASTER': >> >>>>>>> >>> >>> > >> 'bond1', >> >>>>>>> >>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '9000', >> >>>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac', >> >>>>>>> >>> >>> > >> 'speed': >> >>>>>>> >>> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', >> >>>>>>> >>> >>> > >> 'addr': '', >> >>>>>>> >>> >>> > >> 'cfg': >> >>>>>>> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': >> >>>>>>> >>> >>> > >> '9000', >> >>>>>>> >>> >>> > >> 'HWADDR': >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': >> >>>>>>> >>> >>> > >> 'eth2', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', >> >>>>>>> >>> >>> > >> 'ipv4addrs': [], >> >>>>>>> >>> >>> > >> 'hwaddr': >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': >> >>>>>>> >>> >>> > >> {'permhwaddr': >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': >> >>>>>>> >>> >>> > >> 'yes', >> >>>>>>> >>> >>> > >> 'NM_CONTROLLED': >> >>>>>>> >>> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', >> >>>>>>> >>> >>> > >> 'MASTER': >> >>>>>>> >>> >>> > >> 'bond0', >> >>>>>>> >>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', >> >>>>>>> >>> >>> > >> 'speed': >> >>>>>>> >>> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', >> >>>>>>> >>> >>> > >> 'addr': '', >> >>>>>>> >>> >>> > >> 'cfg': >> >>>>>>> >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'HWADDR': >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': >> >>>>>>> >>> >>> > >> 'eth0', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'yes'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', >> >>>>>>> >>> >>> > >> 'ipv4addrs': [], >> >>>>>>> >>> >>> > >> 'hwaddr': >> >>>>>>> >>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, >> >>>>>>> >>> >>> > >> 'software_revision': '1', >> >>>>>>> >>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', >> >>>>>>> >>> >>> > >> '3.5'], >> >>>>>>> >>> >>> > >> 'cpuFlags': >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270', >> >>>>>>> >>> >>> > >> 'ISCSIInitiatorName': >> >>>>>>> >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8', >> >>>>>>> >>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': >> >>>>>>> >>> >>> > >> ['3.0', >> >>>>>>> >>> >>> > >> '3.1', >> >>>>>>> >>> >>> > >> '3.2', >> >>>>>>> >>> >>> > >> '3.3', >> >>>>>>> >>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': >> >>>>>>> >>> >>> > >> '321', >> >>>>>>> >>> >>> > >> 'bondings': >> >>>>>>> >>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', >> >>>>>>> >>> >>> > >> 'netmask': '', >> >>>>>>> >>> >>> > >> 'slaves': >> >>>>>>> >>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': >> >>>>>>> >>> >>> > >> '', >> >>>>>>> >>> >>> > >> 'cfg': >> >>>>>>> >>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'BONDING_OPTS': >> >>>>>>> >>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': >> >>>>>>> >>> >>> > >> 'yes'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': >> >>>>>>> >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', >> >>>>>>> >>> >>> > >> 'netmask': '', >> >>>>>>> >>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', >> >>>>>>> >>> >>> > >> 'slaves': >> >>>>>>> >>> >>> > >> ['eth0', >> >>>>>>> >>> >>> > >> 'eth1'], >> >>>>>>> >>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': >> >>>>>>> >>> >>> > >> {'addr': >> >>>>>>> >>> >>> > >> '10.10.10.6', >> >>>>>>> >>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', >> >>>>>>> >>> >>> > >> 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'MTU': >> >>>>>>> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': >> >>>>>>> >>> >>> > >> '255.255.255.0', >> >>>>>>> >>> >>> > >> 'BOOTPROTO': >> >>>>>>> >>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', >> >>>>>>> >>> >>> > >> 'DEVICE': >> >>>>>>> >>> >>> > >> 'bond1', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '9000', >> >>>>>>> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': >> >>>>>>> >>> >>> > >> ['10.10.10.6/24' >> >>>>>>> >>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr': >> >>>>>>> >>> >>> > >> '00:10:18:cd:da:ac', >> >>>>>>> >>> >>> > >> 'slaves': >> >>>>>>> >>> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': >> >>>>>>> >>> >>> > >> '4'}}, >> >>>>>>> >>> >>> > >> 'bond2': >> >>>>>>> >>> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', >> >>>>>>> >>> >>> > >> 'slaves': >> >>>>>>> >>> >>> > >> [], >> >>>>>>> >>> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', >> >>>>>>> >>> >>> > >> 'cfg': {}, >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr': >> >>>>>>> >>> >>> > >> '00:00:00:00:00:00'}}, >> >>>>>>> >>> >>> > >> 'software_version': '4.16', 'memSize': '24019', >> >>>>>>> >>> >>> > >> 'cpuSpeed': >> >>>>>>> >>> >>> > >> '2667.000', >> >>>>>>> >>> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': >> >>>>>>> >>> >>> > >> [6, >> >>>>>>> >>> >>> > >> 7, 8, >> >>>>>>> >>> >>> > >> 9, >> >>>>>>> >>> >>> > >> 10, 11, >> >>>>>>> >>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': >> >>>>>>> >>> >>> > >> '12278', >> >>>>>>> >>> >>> > >> 'cpus': >> >>>>>>> >>> >>> > >> [0, >> >>>>>>> >>> >>> > >> 1, 2, >> >>>>>>> >>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': >> >>>>>>> >>> >>> > >> 'Snow >> >>>>>>> >>> >>> > >> Man', >> >>>>>>> >>> >>> > >> 'vlans': >> >>>>>>> >>> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': >> >>>>>>> >>> >>> > >> '43.25.17.16', >> >>>>>>> >>> >>> > >> 'cfg': >> >>>>>>> >>> >>> > >> {'DEFROUTE': >> >>>>>>> >>> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', >> >>>>>>> >>> >>> > >> 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'GATEWAY': >> >>>>>>> >>> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK': >> >>>>>>> >>> >>> > >> '255.255.255.0', >> >>>>>>> >>> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'yes'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], >> >>>>>>> >>> >>> > >> 'vlanid': >> >>>>>>> >>> >>> > >> 10, >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': >> >>>>>>> >>> >>> > >> ['43.25.17.16/24'] >> >>>>>>> >>> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface': >> >>>>>>> >>> >>> > >> 'bond0', >> >>>>>>> >>> >>> > >> 'addr': >> >>>>>>> >>> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', >> >>>>>>> >>> >>> > >> 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'MTU': >> >>>>>>> >>> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], >> >>>>>>> >>> >>> > >> 'vlanid': >> >>>>>>> >>> >>> > >> 36, >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '1500', >> >>>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': >> >>>>>>> >>> >>> > >> {'iface': >> >>>>>>> >>> >>> > >> 'bond1', >> >>>>>>> >>> >>> > >> 'addr': >> >>>>>>> >>> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', >> >>>>>>> >>> >>> > >> 'HOTPLUG': >> >>>>>>> >>> >>> > >> 'no', >> >>>>>>> >>> >>> > >> 'MTU': >> >>>>>>> >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100', >> >>>>>>> >>> >>> > >> 'ONBOOT': >> >>>>>>> >>> >>> > >> 'no'}, >> >>>>>>> >>> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], >> >>>>>>> >>> >>> > >> 'vlanid': >> >>>>>>> >>> >>> > >> 100, >> >>>>>>> >>> >>> > >> 'mtu': >> >>>>>>> >>> >>> > >> '9000', >> >>>>>>> >>> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12', >> >>>>>>> >>> >>> > >> 'kvmEnabled': >> >>>>>>> >>> >>> > >> 'true', >> >>>>>>> >>> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24', >> >>>>>>> >>> >>> > >> 'emulatedMachines': >> >>>>>>> >>> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0', >> >>>>>>> >>> >>> > >> u'rhel6.2.0', >> >>>>>>> >>> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', >> >>>>>>> >>> >>> > >> u'rhel5.4.4', >> >>>>>>> >>> >>> > >> u'rhel5.4.0'], >> >>>>>>> >>> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', >> >>>>>>> >>> >>> > >> 'version': >> >>>>>>> >>> >>> > >> '6', >> >>>>>>> >>> >>> > >> 'name': >> >>>>>>> >>> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) >> >>>>>>> >>> >>> > >> client >> >>>>>>> >>> >>> > >> [10.10.10.2]::call >> >>>>>>> >>> >>> > >> getHardwareInfo with () {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) >> >>>>>>> >>> >>> > >> return >> >>>>>>> >>> >>> > >> getHardwareInfo >> >>>>>>> >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, >> >>>>>>> >>> >>> > >> 'info': >> >>>>>>> >>> >>> > >> {'systemProductName': 'CS24-TY', >> >>>>>>> >>> >>> > >> 'systemSerialNumber': >> >>>>>>> >>> >>> > >> '7LWSPN1', >> >>>>>>> >>> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00', >> >>>>>>> >>> >>> > >> 'systemUUID': >> >>>>>>> >>> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', >> >>>>>>> >>> >>> > >> 'systemManufacturer': >> >>>>>>> >>> >>> > >> 'Dell'}} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) >> >>>>>>> >>> >>> > >> client >> >>>>>>> >>> >>> > >> [10.10.10.2]::call >> >>>>>>> >>> >>> > >> hostsList with () {} flowID [222e8036] >> >>>>>>> >>> >>> > >> Thread-13::ERROR::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) >> >>>>>>> >>> >>> > >> vdsm >> >>>>>>> >>> >>> > >> exception >> >>>>>>> >>> >>> > >> occured >> >>>>>>> >>> >>> > >> Traceback (most recent call last): >> >>>>>>> >>> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line >> >>>>>>> >>> >>> > >> 1135, >> >>>>>>> >>> >>> > >> in >> >>>>>>> >>> >>> > >> wrapper >> >>>>>>> >>> >>> > >> res = f(*args, **kwargs) >> >>>>>>> >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in >> >>>>>>> >>> >>> > >> wrapper >> >>>>>>> >>> >>> > >> rv = func(*args, **kwargs) >> >>>>>>> >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in >> >>>>>>> >>> >>> > >> hostsList >> >>>>>>> >>> >>> > >> return {'hosts': >> >>>>>>> >>> >>> > >> self.svdsmProxy.glusterPeerStatus()} >> >>>>>>> >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in >> >>>>>>> >>> >>> > >> __call__ >> >>>>>>> >>> >>> > >> return callMethod() >> >>>>>>> >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in >> >>>>>>> >>> >>> > >> <lambda> >> >>>>>>> >>> >>> > >> **kwargs) >> >>>>>>> >>> >>> > >> File "<string>", line 2, in glusterPeerStatus >> >>>>>>> >>> >>> > >> File >> >>>>>>> >>> >>> > >> "/usr/lib64/python2.6/multiprocessing/managers.py", >> >>>>>>> >>> >>> > >> line >> >>>>>>> >>> >>> > >> 740, >> >>>>>>> >>> >>> > >> in >> >>>>>>> >>> >>> > >> _callmethod >> >>>>>>> >>> >>> > >> raise convert_to_error(kind, result) >> >>>>>>> >>> >>> > >> GlusterCmdExecFailedException: Command execution >> >>>>>>> >>> >>> > >> failed >> >>>>>>> >>> >>> > >> error: Connection failed. Please check if gluster >> >>>>>>> >>> >>> > >> daemon >> >>>>>>> >>> >>> > >> is >> >>>>>>> >>> >>> > >> operational. >> >>>>>>> >>> >>> > >> return code: 1 >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState) >> >>>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving >> >>>>>>> >>> >>> > >> from >> >>>>>>> >>> >>> > >> state >> >>>>>>> >>> >>> > >> init >> >>>>>>> >>> >>> > >> -> >> >>>>>>> >>> >>> > >> state preparing >> >>>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run >> >>>>>>> >>> >>> > >> and >> >>>>>>> >>> >>> > >> protect: >> >>>>>>> >>> >>> > >> repoStats(options=None) >> >>>>>>> >>> >>> > >> Thread-13::INFO::2014-11-24 >> >>>>>>> >>> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run >> >>>>>>> >>> >>> > >> and >> >>>>>>> >>> >>> > >> protect: >> >>>>>>> >>> >>> > >> repoStats, Return response: {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare) >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState) >> >>>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving >> >>>>>>> >>> >>> > >> from >> >>>>>>> >>> >>> > >> state >> >>>>>>> >>> >>> > >> preparing >> >>>>>>> >>> >>> > >> -> >> >>>>>>> >>> >>> > >> state finished >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) >> >>>>>>> >>> >>> > >> Owner.releaseAll requests {} resources {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >> >>>>>>> >>> >>> > >> Owner.cancelAll requests {} >> >>>>>>> >>> >>> > >> Thread-13::DEBUG::2014-11-24 >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref) >> >>>>>>> >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 >> >>>>>>> >>> >>> > >> aborting >> >>>>>>> >>> >>> > >> False >> >>>>>>> >>> >>> > >> ------------------------------- >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> [root@compute4 ~]# service glusterd status >> >>>>>>> >>> >>> > >> glusterd is stopped >> >>>>>>> >>> >>> > >> [root@compute4 ~]# chkconfig --list | grep glusterd >> >>>>>>> >>> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on >> >>>>>>> >>> >>> > >> 5:on >> >>>>>>> >>> >>> > >> 6:off >> >>>>>>> >>> >>> > >> [root@compute4 ~]# >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> Thanks, >> >>>>>>> >>> >>> > >> Punit >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj >> >>>>>>> >>> >>> > >> <kmayilsa(a)redhat.com&gt; >> >>>>>>> >>> >>> > >> wrote: >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >>> Can you send the corresponding error in vdsm.log >> >>>>>>> >>> >>> > >>> from >> >>>>>>> >>> >>> > >>> the >> >>>>>>> >>> >>> > >>> host? >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> Also check if glusterd service is running. >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> Thanks, >> >>>>>>> >>> >>> > >>> Kanagaraj >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote: >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> Hi, >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> After reboot my Hypervisior host can not activate >> >>>>>>> >>> >>> > >>> again >> >>>>>>> >>> >>> > >>> in the >> >>>>>>> >>> >>> > >>> cluster >> >>>>>>> >>> >>> > >>> and failed with the following error :- >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> Gluster command [<UNKNOWN>] failed on server... >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> Engine logs :- >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:28,397 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) START, >> >>>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, >> >>>>>>> >>> >>> > >>> HostId >> >>>>>>> >>> >>> > >>> = >> >>>>>>> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: >> >>>>>>> >>> >>> > >>> 5f251c90 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:30,609 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH, >> >>>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand, >> >>>>>>> >>> >>> > >>> return: >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0 }, >> >>>>>>> >>> >>> > >>> log id: 5f251c90 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:33,768 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>>>>>> >>> >>> > >>> (ajp--127.0.0.1-8702-8) >> >>>>>>> >>> >>> > >>> [287d570d] Lock Acquired to object EngineLock >> >>>>>>> >>> >>> > >>> [exclusiveLocks= >> >>>>>>> >>> >>> > >>> key: >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS >> >>>>>>> >>> >>> > >>> , sharedLocks= ] >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:33,795 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] >> >>>>>>> >>> >>> > >>> Running >> >>>>>>> >>> >>> > >>> command: >> >>>>>>> >>> >>> > >>> ActivateVdsCommand internal: false. Entities >> >>>>>>> >>> >>> > >>> affected : >> >>>>>>> >>> >>> > >>> ID: >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction >> >>>>>>> >>> >>> > >>> group >> >>>>>>> >>> >>> > >>> MANIPULATE_HOST >> >>>>>>> >>> >>> > >>> with role type ADMIN >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:33,796 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] >> >>>>>>> >>> >>> > >>> Before >> >>>>>>> >>> >>> > >>> acquiring >> >>>>>>> >>> >>> > >>> lock in >> >>>>>>> >>> >>> > >>> order to prevent monitoring for host Compute5 from >> >>>>>>> >>> >>> > >>> data-center >> >>>>>>> >>> >>> > >>> SV_WTC >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:33,797 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock >> >>>>>>> >>> >>> > >>> acquired, >> >>>>>>> >>> >>> > >>> from >> >>>>>>> >>> >>> > >>> now a >> >>>>>>> >>> >>> > >>> monitoring of host will be skipped for host Compute5 >> >>>>>>> >>> >>> > >>> from >> >>>>>>> >>> >>> > >>> data-center >> >>>>>>> >>> >>> > >>> SV_WTC >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:33,817 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] >> >>>>>>> >>> >>> > >>> START, >> >>>>>>> >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, >> >>>>>>> >>> >>> > >>> status=Unassigned, >> >>>>>>> >>> >>> > >>> nonOperationalReason=NONE, >> >>>>>>> >>> >>> > >>> stopSpmFailureLogged=false), >> >>>>>>> >>> >>> > >>> log id: >> >>>>>>> >>> >>> > >>> 1cbc7311 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:33,820 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] >> >>>>>>> >>> >>> > >>> FINISH, >> >>>>>>> >>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:34,086 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate >> >>>>>>> >>> >>> > >>> finished. >> >>>>>>> >>> >>> > >>> Lock >> >>>>>>> >>> >>> > >>> released. >> >>>>>>> >>> >>> > >>> Monitoring can run now for host Compute5 from >> >>>>>>> >>> >>> > >>> data-center >> >>>>>>> >>> >>> > >>> SV_WTC >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:34,088 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: >> >>>>>>> >>> >>> > >>> 287d570d, >> >>>>>>> >>> >>> > >>> Job >> >>>>>>> >>> >>> > >>> ID: >> >>>>>>> >>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: >> >>>>>>> >>> >>> > >>> null, >> >>>>>>> >>> >>> > >>> Custom >> >>>>>>> >>> >>> > >>> Event ID: >> >>>>>>> >>> >>> > >>> -1, Message: Host Compute5 was activated by admin. >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:34,090 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >> >>>>>>> >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to >> >>>>>>> >>> >>> > >>> object >> >>>>>>> >>> >>> > >>> EngineLock >> >>>>>>> >>> >>> > >>> [exclusiveLocks= key: >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a >> >>>>>>> >>> >>> > >>> value: >> >>>>>>> >>> >>> > >>> VDS >> >>>>>>> >>> >>> > >>> , sharedLocks= ] >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:35,792 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START, >> >>>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, >> >>>>>>> >>> >>> > >>> HostId >> >>>>>>> >>> >>> > >>> = >> >>>>>>> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: >> >>>>>>> >>> >>> > >>> 48a0c832 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,064 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) START, >> >>>>>>> >>> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, >> >>>>>>> >>> >>> > >>> HostId = >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log >> >>>>>>> >>> >>> > >>> id: >> >>>>>>> >>> >>> > >>> 6d560cc2 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,074 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH, >> >>>>>>> >>> >>> > >>> GetHardwareInfoVDSCommand, log >> >>>>>>> >>> >>> > >>> id: 6d560cc2 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,093 WARN >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is >> >>>>>>> >>> >>> > >>> running >> >>>>>>> >>> >>> > >>> with >> >>>>>>> >>> >>> > >>> disabled >> >>>>>>> >>> >>> > >>> SELinux. >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,127 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] >> >>>>>>> >>> >>> > >>> Running >> >>>>>>> >>> >>> > >>> command: >> >>>>>>> >>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: >> >>>>>>> >>> >>> > >>> true. >> >>>>>>> >>> >>> > >>> Entities >> >>>>>>> >>> >>> > >>> affected >> >>>>>>> >>> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: >> >>>>>>> >>> >>> > >>> VDS >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,147 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START, >> >>>>>>> >>> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, >> >>>>>>> >>> >>> > >>> HostId >> >>>>>>> >>> >>> > >>> = >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: >> >>>>>>> >>> >>> > >>> 4faed87 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,164 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] >> >>>>>>> >>> >>> > >>> FINISH, >> >>>>>>> >>> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,189 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] >> >>>>>>> >>> >>> > >>> Running >> >>>>>>> >>> >>> > >>> command: >> >>>>>>> >>> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities >> >>>>>>> >>> >>> > >>> affected : >> >>>>>>> >>> >>> > >>> ID: >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,206 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START, >> >>>>>>> >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, >> >>>>>>> >>> >>> > >>> status=NonOperational, >> >>>>>>> >>> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED, >> >>>>>>> >>> >>> > >>> stopSpmFailureLogged=false), >> >>>>>>> >>> >>> > >>> log id: fed5617 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,209 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] >> >>>>>>> >>> >>> > >>> FINISH, >> >>>>>>> >>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,223 ERROR >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] >> >>>>>>> >>> >>> > >>> Correlation ID: >> >>>>>>> >>> >>> > >>> 4a84c4e5, >> >>>>>>> >>> >>> > >>> Job >> >>>>>>> >>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call >> >>>>>>> >>> >>> > >>> Stack: >> >>>>>>> >>> >>> > >>> null, >> >>>>>>> >>> >>> > >>> Custom >> >>>>>>> >>> >>> > >>> Event >> >>>>>>> >>> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed >> >>>>>>> >>> >>> > >>> on >> >>>>>>> >>> >>> > >>> server >> >>>>>>> >>> >>> > >>> Compute5. >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,243 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] >> >>>>>>> >>> >>> > >>> Correlation ID: >> >>>>>>> >>> >>> > >>> null, >> >>>>>>> >>> >>> > >>> Call >> >>>>>>> >>> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of >> >>>>>>> >>> >>> > >>> host >> >>>>>>> >>> >>> > >>> Compute5 >> >>>>>>> >>> >>> > >>> was >> >>>>>>> >>> >>> > >>> set >> >>>>>>> >>> >>> > >>> to NonOperational. >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,272 INFO >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running >> >>>>>>> >>> >>> > >>> command: >> >>>>>>> >>> >>> > >>> HandleVdsVersionCommand internal: true. Entities >> >>>>>>> >>> >>> > >>> affected : >> >>>>>>> >>> >>> > >>> ID: >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:37,274 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host >> >>>>>>> >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is >> >>>>>>> >>> >>> > >>> already in >> >>>>>>> >>> >>> > >>> NonOperational status for reason >> >>>>>>> >>> >>> > >>> GLUSTER_COMMAND_FAILED. >> >>>>>>> >>> >>> > >>> SetNonOperationalVds command is skipped. >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:38,065 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] >> >>>>>>> >>> >>> > >>> FINISH, >> >>>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand, return: >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1 }, >> >>>>>>> >>> >>> > >>> log id: 48a0c832 >> >>>>>>> >>> >>> > >>> 2014-11-24 18:05:43,243 INFO >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >> >>>>>>> >>> >>> > >>> (DefaultQuartzScheduler_Worker-35) START, >> >>>>>>> >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, >> >>>>>>> >>> >>> > >>> HostId >> >>>>>>> >>> >>> > >>> = >> >>>>>>> >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: >> >>>>>>> >>> >>> > >>> 3ce13ebc >> >>>>>>> >>> >>> > >>> ^C >> >>>>>>> >>> >>> > >>> [root@ccr01 ~]# >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> Thanks, >> >>>>>>> >>> >>> > >>> Punit >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> _______________________________________________ >> >>>>>>> >>> >>> > >>> Users mailing >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> listUsers@ovirt.orghttp:// lists.ovirt.org/mailman/listinfo/users >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >>> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > >> >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > > >> >>>>>>> >>> >>> > >> >>>>>>> >>> >> >> >>>>>>> >>> >> >> >>>>>>> >>> > >> >>>>>>> >>> > >> >>>>>>> >>> > _______________________________________________ >> >>>>>>> >>> > Gluster-users mailing list >> >>>>>>> >>> > Gluster-users(a)gluster.org >> >>>>>>> >>> > >> >>>>>>> >>> > http://supercolony.gluster.org/mailman/listinfo/gluster-users >> >>>>>>> >> >> >>>>>>> >> >> >>>>>>> > >> >>>>>> >> >>>>>> >> >>>> >> >> > >